Buy-Rite Salon & Spa Equipment

List of Parts & Tools

• Cushion (x1) [Image: A round seat cushion with a lever underneath.]
• Gas Lift (x1) [Image: A cylindrical gas lift mechanism.]
• Base (x1) [Image: A five-star base with wheels.]
• Cover (x1) [Image: A cylindrical cover, likely for the gas lift.]

Assembly Instructions

Step 1

Remove the protective black plastic cap from the gas lift and discard after removal.

[Diagram shows a gas lift cylinder with a black protective cap on top. An arrow indicates the cap is being removed.]

Step 2

Insert the gas lift into the stool base, ensuring the larger end is pointing downward.

[Diagram shows the five-star base with an opening at the top. The gas lift cylinder is shown being inserted into the base, with a downward arrow indicating the direction of insertion. The larger end of the gas lift is at the bottom.]

Step 3

Carefully slide the protective cover over the gas lift from the top until it is fully secure.

[Diagram shows the gas lift cylinder already in the base. A cylindrical cover is shown being slid down from the top of the gas lift, covering it.]

Step 4

Align the top of the gas lift with the center hole on the underside of the seat cushion, then press down to attach the cushion.

[Diagram shows the assembled base and gas lift. The round seat cushion is shown above, with its underside aligned with the top of the gas lift. Downward arrows indicate the cushion is being pressed onto the gas lift.]

Product Care

• Brush away excess hair. ?
• Clean surface with damp cloth or use simple soap & water solution. ?
• Avoid using corrosive cleaning agents such as bleaches. ☣️
• Do not remove upholstery for cleaning. ?️

Product Information

1. Enjoy your new chair!
2. After assembly and before use, extend the gas cylinder to full height and back down several times to prime the cylinder.
3. If you have any questions or concerns, please contact the customer experience team at 912-335-4445.