Buy-Rite Kate Shampoo Chair SY-9227-2

1. Locate the arm frame and lay it flat on the floor in a dry, clean location. The front of the frame is identified by the location of the arm cushion.

2. Locate the two support bars and position them to align the mounting points with the holes in the arm frame.

3. Using the provided M6 bolts, attach each support bar to the arm frame by first inserting the bolts through the mounting holes in both parts. On the opposite side, place the square nut onto the bolt, followed by the lock nut. [Diagram illustrates bolt, square nut, and lock nut assembly.]

4. Ensure the support bar with the plastic guide is installed in the front position.

1. While the chair is still on its side, slide the front support bar through the guide bracket on the underside of the seat cushion. [Diagram shows support bar sliding into seat cushion bracket.]

1. Locate the bracket on the side of the backrest and remove the lock nut and metal washer, leaving the white washer in place. Slide the metal backrest bar into the mounting hole of the arm frame and reattach the washer and lock nut to secure it in place.

1. Turn the chair to the opposite side and repeat steps 1 and 3 to attach the second arm frame to the chair.

2. Once complete, ensure all nuts are securely tightened.