JLab GO Air Pop True Wireless Earbuds
We are thrilled you're rocking with JLab! We're proud of our products and stand behind them.
Your Warranty: All warranty claims are subject to JLab authorization and our sole discretion. Keep your proof of purchase to ensure warranty coverage.
Contact Us: Email support@jlab.com or visit intl.jlab.com/contact
Register Now: intl.jlab.com/register for product updates | user manual | FAQs and more.
Bluetooth Pairing
1. Remove stickers, close the case.
[Diagram Description: Image shows two JLab GO Air Pop earbuds being removed from their charging case.]
2. The red light on the case indicates charging. Remove the earbuds from the case.
[Diagram Description: Image shows the charging case with red indicator lights, followed by the earbuds being taken out of the case.]
3. One earbud will flash blue/white, indicating it is ready to pair with your device.
[Diagram Description: Image shows a single earbud flashing blue and white lights, indicating it is ready for pairing.]
4. Select 'JLab GO Air Pop' in your device's Bluetooth settings to connect. After two audible prompts, a solid white light indicates connection.
[Diagram Description: Image displays a smartphone's Bluetooth settings menu, with 'JLab GO Air Pop' highlighted for connection.]
Adding New/Other Bluetooth Devices:
- Turn off Bluetooth on any previously connected devices.
- Turn on Bluetooth on your new device.
- Remove earbuds from the case. They will automatically enter pairing mode.
- Select 'JLab GO Air Pop' in device settings to connect.
Button Functions
Left Earbud
- Volume Down: Single tap
- SIRI (iOS) or 'OK GOOGLE' (ANDROID): Double tap
- Rewind: Press and hold for 1+ second
Right Earbud
- Volume Up: Single tap
- Play/Pause: Double tap ▶️
- Forward: Press and hold for 1+ second
Common Functions
- Answer Call: Single tap ?
- Hang Up: Double tap
- Reject Call: Press and hold for 1+ second
- EQ Switching: Triple tap
Audio Prompts
- Power On: Tone
- Bluetooth Connected: Two beeps ?
- Low Battery: "Low Battery" (below 20%)
- Power Off: Tone
Customizing EQ3 Sound Modes
Triple tap the right or left earbud to cycle through different EQ modes (GO Air Pop cycles through 3 EQ settings).
- JLab Classic Mode (one beep): JLab C3™ signature sound, boosting vocals and bass.
- Balanced Mode (two beeps): Balanced sound, no extra enhancements.
- Bass Boost Mode (three beeps): Amplifies bass and sub-bass.
Earbud Charging
1. Place earbuds in the charging case; they will automatically power off and begin charging.
[Diagram Description: Image shows the earbuds being placed into the charging case for automatic power-off and charging.]
2. Earbuds automatically power on and connect to your device when removed from the case.
[Diagram Description: Image shows the earbuds being removed from the charging case, automatically powering on and connecting to a device.]
Charging Case Indicator Lights:
- Solid Red: Case battery 100-25%
- Flashes red 4 times: Case battery less than 25% (indicates case needs charging)
Charging Case
Connect GO Air Pop to a computer or USB 5V 1A (or lower) output device.
Charging: Flashing blue light ?
Fully Charged: Solid blue light ?
[Diagram Description: Diagram shows the GO Air Pop earbuds charging case connected via USB cable to a power source, with indicator lights showing charging status (flashing blue for charging, solid blue for fully charged).]
Adjusting Fit
Try all included ear tips for the best fit and seal.
[Diagram Description: Illustration demonstrates inserting an earbud into your ear canal and gently rotating it to adjust for the best fit and seal.]
Quick Tips
- Either the left or right earbud can be used independently for music and phone calls. Simply select one and remove it from the case to connect.
- Only one Bluetooth device can be connected at a time. Turn off Bluetooth on devices you do not wish to connect to, and turn on Bluetooth on your desired device to connect.
- Thoroughly dry the earbuds before placing them in the charging case to prevent damage. The earbuds are sweat/water resistant, but the case is not.
Warning: Thoroughly dry the earbuds before placing them in the charging case to prevent damage. The earbuds are sweat/water resistant, but the case is not.
Troubleshooting
Connection Failed or Earbuds Disconnected (Manual Reset)
- Place earbuds in the charging case and 'Forget' GO Air Pop in your Bluetooth device settings.
- On one earbud in the charging case, quickly tap 7 times. The earbud will flash blue 4 times.
- On the other earbud in the charging case, quickly tap 7 times. The earbud will flash blue 4 times.
- Remove both earbuds from the charging case. One earbud will be solid white, the other will flash blue/white, indicating it is ready to pair with your device.
Tutorial videos can be found at: intl.jlab.com/manuals
Important Notes
- Avoid extreme heat, cold, and humidity.
- Avoid dropping or crushing the earbuds.
- Earwax may build up on the earbud tips, reducing sound quality. Gently clean earwax with a cotton swab or other small tool to improve sound quality.
- If you experience discomfort or pain, try lowering the volume or discontinuing use.
- If you frequently experience discomfort while using this product, stop use and consult your doctor.
- Treat your earbuds like a pair of stylish sunglasses and store them in a safe place when not in use.
