Ecler eCMP12 Specialized Loudspeakers
Product Overview
The Ecler eCMP12 is a 300W high-efficiency musical projector designed for outdoor applications. It features a waterproof and sun-screening building material with an IP56 rating. The projector is equipped with a 12" LF driver and a 1.7" HF coaxial driver, offering a nominal power of 300W @ 8Ω and a 70/100V line transformer with selectable power options of 50/100/200W/8Ω (100V) or 25/50/100W/8Ω (70V).
Key Features
- Weatherproof 2-way music projector.
- 300 W @ 8Ω nominal power.
- 100V power options: 50/100/200W/OFF and 8 Ω.
- 70V power options: 25/50/100W/OFF and 8 Ω.
- Input & output connection via terminal block.
- Frequency response (-10dB): 91 Hz-20 kHz.
- Dispersion (HxV): 107° x 107°.
- Material: Polypropylene, aluminium (grille), hot-dipped galvanized steel (U-bracket).
- Weather-resistant IP56 rating.
Applications
- Commercial
- Hospitality
- Education
- Corporate
- Sports and wellness
- House of worship
- Leisure
Technical Specifications
| System | |
|---|---|
| Effective frequency range¹ | 91 Hz-20 kHz (-10dB) |
| Coverage angle² | 107°x107° |
| Power handling | 300 W RMS / 1200 W Peak |
| Sensitivity³ | 100 dB (1W/1m) |
| Maximum SPL⁴ | 125 dB continuous / 131 dB peak |
| Power options | 100V: 50/100/200W/OFF and 8 Ω 70V: 25/50/100W/OFF and 8 Ω |
| Recommended amplifier power | 600 W RMS |
| Transducers | |
| Ways | 2-ways long throw |
| Low Frequency driver | 12" |
| High Frequency driver | 1,7" coaxial |
| Nominal impedance | 8Ω |
| Filters | |
| Crossover filter | 2,1 kHz |
| Physical | |
| Connection type | Terminal block (input+output) |
| Environmental | IP56 rated |
| Enclosure material | Polypropylene |
| Grille material | Aluminium |
| Mounting system | Hot-dipped galvanized steel U-bracket |
| Operating temperature | Min: -20°C; -4°F Max: 70°C; 158°F |
| Operating humidity | <85% HR |
| Storage temperature | Min: -20°C; -4°F Max: 70°C; 158°F |
| Storage humidity | <90% HR |
| Finished colour | Grey (RAL 538C) |
| Dimensions (WxHxD) | 407 x 410 x 378 mm / 16.0 x 16.1 x 14.9 in. (If the mounting bracket is added the total depth will be 443mm / 17.45") |
| Weight | 20.0 kg / 44.1 lb |
| Shipping Dimensions (WxHxD) | 475 x 490 x 445 mm / 18.7 x 19.29 x 17.52 in. |
| Shipping Weight | 21.3 kg / 46.96 lb |
¹ -10dB below the sound pressure level at specified sensitivity.
² 6dB below the sound pressure level than that at the direction of maximum level. Max. angle between 1 kHz and 4 kHz.
³ Measured on-axis, far field and referenced to 1 meter by inverse square law. Average from 100 Hz to 10 kHz.
⁴ Calculated from sensitivity and power handling specifications, exclusive of power compression
Frequency Response
The frequency response graph shows the SPL (dB@1W/1m) across various frequencies (Hz). The curve indicates a relatively flat response from approximately 90 Hz to 20 kHz, with a dip around 200 Hz and a gradual increase towards 20 kHz.
Polar Diagrams
The polar diagrams illustrate the directivity of the eCMP12 loudspeaker at different frequencies. The diagrams show sound pressure levels (dBSPL) at various angles (Deg) for frequencies including 125.00 Hz, 250.00 Hz, 500.00 Hz, 1.00K Hz, 2.00K Hz, 4.00K Hz, and 8.00K Hz. Key parameters like Bandwidth (BW), Q, and Directivity Index (DI) are provided for each frequency.
Mechanical Diagrams
The mechanical diagrams provide detailed dimensions and views of the Ecler eCMP12 loudspeaker. They include front, side, top, and angled views, along with specific measurements in millimeters (mm). A part number (61-1076-0100) is also indicated.
