Assembly Instructions: 3 Section Bamboo Wardrobe (Model 43036578)
Care Instructions: Wipe clean with a soft dry or damp cloth. Keep away from water and direct sunlight. For indoor and domestic use. Check and tighten all parts regularly.
Warning: Do not stand or sit on the unit. Do not lean on the product. Do not drag the product. Use only on a flat surface. Do not use until all screws, bolts and knobs are firmly secured. This product contains small parts and sharp points; keep away from children and babies. Adult assembly required. Failure to follow these warnings could result in serious injury. Maximum total loading weight: 56kg (7kg for each shelf and each clothes rail).
Hardware List
- a: 5x40mm - 36PCS
- b: 5x30mm - 12PCS
- c: 6x42mm - 8PCS
- d: 8PCS
- e: 4x20mm - 20PCS
- f: 4x30mm - 20PCS
- g: 8x30mm - 8PCS
- h: 6x60mm - 2PCS
- i: 4x40mm - 2PCS
- j: 2PCS
- k: 2PCS
- l: 2PCS
- m: hex key - 1PC
Tool required: Philips Head Screw Driver (Not Provided)
Assembly Steps
Step 1: Attach part F to part G using screws c (x2), d (x2), and g (x2).
Step 2: Attach part F to part D using screws c (x2), d (x2), and g (x2).
Step 3: Insert shelves E into the assembled frame, securing with screws a (x8).
Step 4: Attach parts C and D to the frame using screws a (x8).
Step 5: Attach part M to the frame.
Step 6: Attach part C and M to the frame.
Step 7: Attach parts N to the base, securing with screws e (x6).
Step 8: Attach the assembled base unit (N) to the main frame using screws b (x4).
Step 9: Attach part H to part J using screws c (x2), d (x2), and g (x2).
Step 10: Attach parts A and B to the frame using screws c (x2), d (x2), and g (x2).
Step 11: Attach parts H and J to the frame, securing with screws a (x5) and h (x2).
Step 12: Attach parts P and Q to the frame using screws a (x5).
Step 13: Continue assembling the frame by attaching parts P.
Step 14: Assemble the top shelves K using screws f (x8).
Step 15: Attach the assembled shelves K to the unit using screws e (x6).
Step 16: Attach parts K to the frame using screws b (x8).
Step 17: Attach part H to the frame using screws a (x4).
Step 18: Attach part A to the frame using screws a (x4).
Step 19: Attach parts T to the frame using screws f (x4).
Step 20: Attach parts R to the frame using screws e (x8).
Step 21: Secure the unit to the wall using screws k (x2) and j (x2). Warning: It is strongly recommended that this product is permanently fixed to the wall. Please seek professional advice if you are in doubt of what fixing device to use. Regularly check that anchors are securely maintained. Stability of tall items may be affected by thick pile carpet or uneven floors. Do not place unanchored televisions on furniture. Caution: For your safety when attaching the anchor fixings, please note the following: Check any electrical wires or plumbing inside the wall before drilling any holes (if you are unsure please seek professional advice from a qualified tradesperson).
Step 22: The wardrobe is now assembled.
Important Safety Information
- It is strongly recommended that this product is permanently fixed to the wall.
- Please seek professional advice if you are in doubt of what fixing device to use.
- Regularly check that anchors are securely maintained.
- Stability of tall items may be affected by thick pile carpet or uneven floors.
- Do not place unanchored televisions on furniture.
- Caution: for your safety when attaching the anchor fixings, please note the following: Check any electrical wires or plumbing inside the wall before drilling any holes (if you are unsure please seek professional advice from a qualified tradesperson).
