Assembly Instructions
42985075 3 SECTION WARDROBE
ATTENTION: DO NOT TIGHTEN THE SCREWS UNTIL THE PRODUCT IS FULLY ASSEMBLED. FOR INDOOR USE ONLY.
MAXIMUM LOADING WEIGHT: 8KG FOR EACH CLOTHES RAIL, 8KG FOR TOP SHELF, 5KG FOR EACH MIDDLE SHELF, 15KG FOR BOTTOM SHELF.
Hardware List
| Part | Description | Quantity |
|---|---|---|
| a | M5X40mm | 12pcs |
| b | M6X28mm | 20pcs |
| c | 4pcs | |
| d | M4X12mm | 8pcs |
| e | 8pcs | |
| f | 3pcs | |
| g | 2pcs | |
| h | 2pcs | |
| i | 2pcs |
Parts Identification
- Part A: 1pc
- Part B: 3pcs
- Part C: 1pc
- Part D: 2pcs
- Part E: 2pcs
- Part F: 2pcs
- Part G: 2pcs
- Part H: 2pcs
- Part I: 2pcs
Assembly Steps
Step 1
Attach part F to part D using 4x screws 'c' and 4x screws 'e'.
Step 2
Attach part E to part G using 4x screws 'e'.
Step 3
Assemble the main frame by attaching shelves 'B' to the side panels (E, G) using 12x screws 'a'.
Step 4
Connect the horizontal supports (C, F) and vertical supports (D) to the frame using 12x screws 'b'.
Step 5
Attach the remaining side panel 'A' to the structure using 8x screws 'b'.
Step 6
Install the back supports/rails (I, D) using 8x screws 'd'.
Step 7
Secure the wardrobe to the wall for stability. Attach wall bracket 'g' and 'h' to the unit, and use wall plug 'i' in the wall. Use 2x 'g', 2x 'h', and 2x 'i' in total.
Toppling Furniture Warning
IT IS STRONGLY RECOMMENDED THAT THIS PRODUCT IS PERMANENTLY FIXED TO THE WALL.
PLEASE SEEK PROFESSIONAL ADVICE IF YOU ARE IN DOUBT OF WHAT FIXING DEVICE TO USE.
REGULARLY CHECK THAT ANCHORS ARE SECURELY MAINTAINED.
STABILITY OF TALL ITEMS MAY BE AFFECTED BY THICK PILE CARPET OR UNEVEN FLOORS.
DO NOT PLACE UNANCHORED TELEVISIONS ON FURNITURE.
CAUTION: FOR YOUR SAFETY WHEN ATTACHING THE ANCHOR FIXINGS, PLEASE NOTE THE FOLLOWING:
CHECK ANY ELECTRICAL WIRES OR PLUMBING INSIDE THE WALL BEFORE DRILLING ANY HOLES (IF YOU ARE UNSURE PLEASE SEEK PROFESSIONAL ADVICE FROM A QUALIFIED TRADESPERSON).
