Assembly Instructions
43593859 ADRIAN CABINET
CARE INSTRUCTIONS
WIPE CLEAN WITH A SOFT DAMP CLOTH. NEVER USE SCOURERS, ABRASIVES OR CHEMICAL SOLVENTS. KEEP AWAY FROM MOISTURE AND DIRECT SUNLIGHT. STORE IN A DRY PLACE. FOR INDOOR USE ONLY.
WARNING
DO NOT STAND, SIT OR LEAN ON THE UNIT. DO NOT USE THIS UNIT AS A STEP LADDER. ENSURE THIS UNIT IS USED ONLY ON A FLAT SURFACE. DO NOT USE THIS UNIT UNLESS ALL BOLTS AND SCREWS ARE FIRMLY SECURED. DO NOT PLACE HOT OBJECTS SUCH AS COFFEE CUPS DIRECTLY ON THE SURFACE OF THIS FURNITURE ITEM. THIS ITEM IS FOR STORAGE PURPOSES ONLY. CONTAINS SMALL PARTS. IT IS TO BE ASSEMBLED BY AN ADULT. FAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN SERIOUS INJURY.
MAXIMUM SAFE LOAD: 15kg FOR TOP, 10kg FOR EACH SHELF.
1 Hardware List
- A: 6x30mm, 14pcs
- B: 6x35mm, 8pcs
- C: 15x10mm, 8pcs
- D: 7x35mm, 4pcs
- E: 6x12mm, 8pcs
- F: 4x40mm, 5pcs
- G: 2pcs
- H: 3x12mm, 30pcs
- I: 4x25mm, 4pcs
- J: 1pcs
- K: 2pcs
- L: 8pcs
- M: 4pcs
- N: 2pcs
- O: 3x14mm, 8pcs
2 Parts List
- 1pc
- 1pc
- 1pc
- 2pcs
- 1pc
- 1pcs
- 1pcs
- 2pcs
- 4pcs
Assembly Steps
STEP 1
Attach part 2 and part 3 to the base panel (part 1). Use four (4) B screws (6x35mm) to secure part 2 to the base. Use four (4) B screws (6x35mm) to secure part 3 to the base.
Diagram Description: Shows two rectangular panels (parts 2 and 3) being attached to a larger rectangular base panel (part 1) using screws labeled 'B'.
STEP 2
Attach the side panel (part 5) and the back panel (part 6) to the base assembly. Use two (2) C screws (15x10mm) and six (6) A screws (6x30mm) to connect part 5 to the base. Then attach part 6 to the base using screws.
Diagram Description: Shows a vertical panel (part 5) and a larger vertical panel (part 6) being attached to the base assembly (parts 1, 2, 3) using screws labeled 'C' and 'A'. A close-up shows how screws 'C' and 'A' are inserted.
STEP 3
Attach the second side panel (part 2) to the assembly. Use two (2) C screws (15x10mm) and four (4) A screws (6x30mm) to secure part 2 to the base and the back panel.
Diagram Description: Shows the second side panel (part 2) being attached to the existing structure using screws labeled 'C' and 'A'. A close-up illustrates the screw placement.
STEP 4
Attach the front panel (part 4) to the assembly. This panel is attached to the side panels.
Diagram Description: Shows a front panel (part 4) being attached to the side panels of the cabinet.
STEP 5
Attach the top panel (part 1) to the structure. Use four (4) B screws (6x35mm), two (2) G parts (likely dowels or cam locks), and four (4) H screws (3x12mm) to secure the top panel.
Diagram Description: Shows the top panel (part 1) being placed on the assembled cabinet structure and secured with screws labeled 'B', 'G', and 'H'.
STEP 6
Attach the second front panel (part 1) to the structure. Use four (4) C screws (15x10mm) and three (3) F screws (4x40mm) to secure this panel.
Diagram Description: Shows another panel (part 1) being attached to the cabinet structure using screws labeled 'C' and 'F'. A close-up shows the connection points.
STEP 7
Attach the internal shelves (parts 3 and 4) to the cabinet. Use four (4) A screws (6x30mm) to secure part 3 and part 4.
Diagram Description: Shows two shelves (parts 3 and 4) being inserted into the cabinet and secured with screws labeled 'A'.
STEP 8
Attach the bottom shelf (part 7) to the cabinet. Use four (4) D screws (7x35mm) to secure the bottom shelf.
Diagram Description: Shows the bottom shelf (part 7) being attached to the lower part of the cabinet structure using screws labeled 'D'.
STEP 9
Insert dowels (part 9) into the designated holes on the top panel. Use eight (8) E screws (6x12mm) to secure the top panel.
Diagram Description: Shows dowels (part 9) being inserted into holes on a panel, and then screws labeled 'E' being used.
STEP 10
Attach the drawer runners or supports (part 8) to the cabinet. Use eight (8) H screws (3x12mm) and four (4) I screws (4x25mm) to secure these parts.
Diagram Description: Shows two panels (part 8) being attached to the inside of the cabinet structure using screws labeled 'H' and 'I'. Close-ups show the screw and panel connections.
STEP 11
Attach the second set of drawer runners or supports (part 8) to the cabinet. Use sixteen (16) H screws (3x12mm) to secure these parts.
Diagram Description: Shows another two panels (part 8) being attached to the cabinet structure using screws labeled 'H'.
STEP 12
Assemble and attach the drawers. Use two (2) H screws (3x12mm), eight (8) L screws, eight (8) O screws (3x14mm), two (2) N screws, and two (2) M screws (4pcs) for the drawer components and runners.
Diagram Description: Shows drawer components being assembled and attached. Various screws (H, L, O, N, M) are used for this step. Close-ups detail the connections for drawer runners and drawer fronts/sides.
STEP 13
Attach the cabinet doors. Use two (2) M screws, two (2) F screws (4x40mm), and two (2) K screws to attach the doors.
Diagram Description: Shows cabinet doors being attached to the main structure using screws labeled 'M', 'F', and 'K'. Close-ups illustrate the hinge attachment points.
TOPPLING FURNITURE WARNING
WARNING
Children have died from furniture tipover. ALWAYS secure it with an anchor device.
- NEVER allow children to stand, climb or hang on drawers, doors, or shelves.
- NEVER open more than one drawer at a time.
- Place heavy items down low.
- NEVER put a TV on this furniture.
This is a permanent label. Do not remove!
Additional Safety Information:
- ALWAYS secure it with an anchor device.
- Please seek professional advice if you are in doubt of what fixing device to use.
- Regularly check that anchors are securely maintained.
- Use safety drawer locks to prevent children climbing.
- Stability of tall items may be affected by thick pile carpet or uneven floors.
- Do not place unanchored televisions on furniture.
CAUTION:
For your safety when attaching the anchor fixings, please note the following:
- Check any electrical wires or plumbing inside the wall before drilling any holes (if you are unsure please seek professional advice from a qualified tradesperson).
TOPPLING HAZARD
WARNING: PLEASE SECURE YOUR FURNITURE WITH THE SUPPLIED WALL FIXING. SCAN THE CODE FOR MORE INFORMATION.
Hinger Adjustment Tips
Noted: The door might be scraping, bumping, misaligned when first assembly. Please follow the below tips:
Adjust the door up and down
1. Loosen the two mounting screws on both hinges, but only slightly.
2. Gently close the cabinet door.
3. With the door still closed, adjust the cabinet door to the desired height.
4. Open the cabinet door again, being careful not to jostle the door out of position.
5. Retighten the screws by hand.
Diagram Description: Shows a cabinet door and close-ups of hinges with arrows indicating adjustment points for up/down movement.
Move the door in and out
If the door doesn't meet the box at the top, adjust the top hinge toward the cabinet and/or adjust the bottom hinge away from the cabinet. If the door is gapped at the bottom, do the reverse.
Diagram Description: Shows a cabinet door and close-ups of hinges with arrows indicating adjustment points for in/out movement of the door relative to the cabinet frame.
Move the door right or left
You can adjust one or both hinges on each door, depending on how much correction it needs. If the door seems to be tilting down to the right, turn the side-to-side screw on the top hinge so the hinge pulls closer to the side of the cabinet box, moving the top of the door to the left.
Diagram Description: Shows a cabinet door and close-ups of hinges with arrows indicating adjustment points for side-to-side movement of the door.
