Assembly Instruction
42976158 KIDS BUCKET CHAIR
Please read instructions carefully. Be sure you have all parts before you begin to assemble. Assemble furniture on a clean, flat surface such as carpet to avoid any abrasion. Tools required: Hex Key (included).
Parts
- Part A: Washer (4 PC) - A flat, circular metal ring used with screws.
- Part B: Screw (4 PC) - A metal screw with a hexagonal head, designed to be tightened with a hex key.
- Part C: Hex Key (1 PC) - An L-shaped tool provided for tightening the screws.
- Part D: Seat (1 PC) - The main bucket-shaped seat component of the chair.
- Part E: Legs (1 PC) - A set of four legs that attach to the underside of the seat.
Assembly
Step 1
Attach the four legs (Part E) to the underside of the seat (Part D). For each leg, use one washer (Part A) and one screw (Part B). Tighten all screws securely using the provided hex key (Part C). Once all screws are tightened, the assembly is complete.
Visual representation of Step 1 shows the seat (D) with the four legs (E) being attached. Each leg connection point is secured with a washer (A) and a screw (B), tightened by the hex key (C). The diagram indicates 4 screws and 4 washers are used in total.
The final image shows the fully assembled chair with four legs.
Care Instruction
Wipe clean with a soft damp or dry cloth. Do not use abrasive cleaners.
Warning
Max. safe loading: 50kgs. ⚠️ Choking hazard – small parts. Not for children under 3 years.
