Assembly Instructions: Bamboo Shoe Cabinet (43019526)
Care Instructions
Wipe clean with a soft dry or damp cloth. Keep away from water and direct sunlight. For indoor and domestic use. Check and tighten all parts regularly.
Warnings
- Do not stand or sit on the unit.
- Do not lean on the product.
- Do not drag the product.
- Use only on a flat surface.
- Do not use until all screws, bolts, and knobs are firmly secured.
- This product contains small parts and sharp points; keep away from children and babies.
- Adult assembly required.
- Failure to follow these warnings could result in serious injury.
- Maximum total loading weight: 28kg (8kg for top panel, 5kg for each shelf).
Hardware List
Identifier | Description | Quantity |
---|---|---|
a | 5x40mm screw | 12PCS |
b | 6x30mm screw | 4PCS |
c | 8PCS screw | 8PCS |
d | 4PCS screw | 4PCS |
e | 3x14mm screw | 4PCS |
f | 4x30mm screw | 1PC |
g | 1PC component | 1PC |
h | 1PC component | 1PC |
i | 2PCS component | 2PCS |
j | 3x12mm screw | 1PC |
k | Hex key | 1PC |
Tool required: Phillips Head Screw Driver (Not Provided)
Assembly Steps
Step 1
Attach side panels (B) to the back panel (C) and bottom panel (F) using screws (a).
Step 2
Attach the other side panel (B) to the back panel (C) and bottom panel (F) using screws (a). Attach the back support panel (G) using screws (b).
Step 3
Insert the shelf panels (E) and the top panel (D) into the designated slots on the side panels (B).
Step 4
Secure the shelf panels (E) and top panel (D) using screws (c).
Step 5
Attach the front decorative panels (H) to the side panels (B) using screws (d) and (e). Attach the top decorative panel (A) using screws (d).
Step 6
Attach the top panel (A) to the main structure using screws (a).
Step 7
Attach the back panels (H) to the back of the unit using screws (d), (e), (h), (i), and (j). Ensure all parts are aligned correctly.
Step 8
Wall Mounting: It is strongly recommended that this product is permanently fixed to the wall. Seek professional advice if unsure about fixing devices. Regularly check anchors. Stability of tall items may be affected by thick pile carpet or uneven floors. Do not place unanchored televisions on the cabinet.
Caution for safety: Before drilling any holes for wall mounting, check for electrical wires or plumbing inside the wall. If unsure, seek professional advice from a qualified tradesperson. Attach the unit to the wall using screws (f) and (g), and components (i).
Important Note: Do not tighten the screws until the product is fully assembled.