PRODUCT INSTRUCTION KF150167-01

Important Information and Safety Warnings

Important Information

Please read the entire manual thoroughly before assembling or using this product. Keep it for future reference.

Assembly Tips

Avoid Scratches

To prevent scratching the furniture during assembly, use a soft layer such as a rug. ?

Improve Efficiency

Consider finding a partner to assist with assembly to speed up the process and reduce the time required. ?

Anti-Topple Warning

WARNING: Overturned furniture can cause serious or fatal crush injuries. To prevent tipping, ensure you use the provided wall attachment hardware. If not included, please purchase a suitable wall attachment for your wall type. Consult a professional if unsure. Always follow each assembly step carefully. ⚠️

Important Maintenance Notes

It is crucial to re-tighten all screws approximately two weeks after assembly and then every three months to ensure the product's stability throughout its lifespan.

For regular maintenance and cleaning:

• For the frame: Wipe with a rag dipped in neutral detergent, then dry with a clean rag.
• For glass surfaces: Wipe with a rag dampened with glass cleaner, then dry with a dry rag.

Do not use an electric screwdriver or apply excessive force during installation, as this can easily damage the panels.

Parts List

The following parts are included in the package:

• Part 1: Base Panel
• Part 2: Base Panel
• Part 3: Left Side Panel
• Part 4: Middle Divider Panel
• Part 5: Middle Divider Panel
• Part 6: Right Side Panel
• Part 7: Back Support Rail
• Part 8: Back Support Rail
• Part 10: Top Panel Support
• Part 11: Top Panel Support
• Part 12: Drawer Slide Runner (Left)
• Part 13: Drawer Slide Runner (Right)
• Part 14: Top Panel (Left)
• Part 15: Top Panel (Right)
• Part 16: Drawer Slide Runner (Left/Right)
• Part 17: Support Rail
• Part 18: Support Rail
• Part 19: Vertical Support Slats
• Part 20: Vertical Support Slats
• Part 21: Back Panel Connector
• Part 22: Drawer Front Panel
• Part 23: Drawer Side Panel (Left)
• Part 24: Drawer Side Panel (Right)
• Part 25: Drawer Back Panel
• Part 26: Drawer Bottom Panel
• Part 27: Drawer Side Panel (Left)
• Part 28: Drawer Side Panel (Right)
• Part 29: Drawer Back Panel
• Part 30: Drawer Bottom Panel
• Part 31: Drawer Front Panel
• Part 32: Vertical Support Slats
• Part 33: Drawer Front Panel
• Part 34: Drawer Side Panel (Left)
• Part 35: Drawer Bottom Panel
• Part 36: Drawer Front Panel
• Part 37: Drawer Side Panel (Right)
• Part 38: Drawer Side Panel (Left)
• Part 39: Drawer Back Panel
• Part 40: Drawer Side Panel (Right)

Hardware and Tools

Tools Required

The following tools are recommended for assembly:

• Tape Measure
• Pencil
• Phillips Head Screwdriver
• Hammer
• Allen Wrench (if applicable)
• Level

Hardware Included

Please verify you have all the necessary hardware. Note that similar-looking screws may differ in size.

• Screw A (Ø5 x 31mm): 16 pcs
• Screw B (Ø15 x 11mm): 16 pcs
• Screw C (Ø8 x 30mm): 44 pcs
• Screw D (Ø3 x 12mm): 1 pc (for slide attachment)
• Screw E (3 x 12mm): 4 pcs (for slide attachment)
• Screw F (Ø3 x 12mm): 2 pcs
• Screw G (Ø6 x 25mm): 2 pcs
• Screw H (Ø6 x 35mm): 18 pcs
• Screw J (3.5 x 14mm): 4 pcs
• Screw K (3 x 12mm): 12 pcs
• Screw L (3 x 12mm): 18 pcs
• Screw M (Ø6 x 40mm): 6 pcs
• Screw N (White nut): 1 pc
• Screw P (Ø4 x 18mm): 2 pcs
• Screw Q (Ø6 x 30mm): 6 pcs
• Screw R (Ø6 x 40mm): 6 pcs
• Screw S (Ø8 x 30mm): 3 pcs
• Screw T (6 x 20mm): 6 pcs
• Screw Z (White nut): 1 pc
• Drawer Slides D-CL/D-CR: Multiple sets

Assembly Instructions

Step 1

Attach drawer slides (13) to base panel (1) using Screw D (x1) and Screw E (x4).

Step 2

Attach divider panel (4) to base panel (1) with Screw C (x2). Attach divider panel (4) to drawer slide (13) with Screw A (x3) and Screw E (x1).

Step 3

Attach divider panel (5) to base panel (1) with Screw C (x4). Attach divider panel (5) to drawer slide (13) with Screw A (x3) and Screw E (x1). Rotate 180 degrees (?).

Step 4

Join base panels (1, 2) with Screw C (x3). Attach panels 22 and 23 to panels 1 and 2 using Screw H (x18).

Step 5

Attach base panels (1, 2) to the main structure using Screw A (x12) and Screw C (x14).

Step 6

Attach drawer side panel (24) to divider panel (4) using Screw B (x2).

Step 7

Attach drawer side panel (24) to base panel (1) and divider panel (5) using Screw B (x4).

Step 8

Connect top supports (10, 11) to back rails (7, 8) using Screw A (x2), R (x2), F (x2), C (x2), and B (x2).

Step 9

Attach back rail (7) and support rail (17) to top support (10) using Screw B (x6). Connect divider panels (4, 5) to base panels (1, 2) using Screw G (x2) and Screw A (x2).

Step 10

Attach side panels (3, 4, 5, 6) to base and top supports using Screw B (x8), Screw C (x4), and Screw A (x4).

Step 11

Attach drawer slides (D-CL/D-CR) to the cabinet structure using Screw R (x4), Screw D (x1), and Screw E (x4).

Step 12

Insert drawer slides (B x4) into cabinet parts 3, 4, 5, and 6.

Step 13

Attach drawer slides (D x2, E x8) to the cabinet.

Step 14

Attach top panels (13) to the cabinet using Screw Q (x6).

Step 15

Join top panels (14, 15) using Screw S (x3) and Screw T (x6). Attach to the structure with Screw A (x16).

Step 16

Secure top panels (14, 15) to the cabinet using Screw B (x16) and Screw C (x16).

Step 17

Attach final supports using Screw L (x18).

Step 18

Assemble drawer sides (26) to bottom panel (26) with Screw K (x4), Screw J (x4) for one drawer; and Screw K (x12), Screw J (x16) for another.

Step 19

Attach drawer fronts (26) to drawer sides using Screw K (x12).

Step 20

Attach drawer handles or slides using Screw J (x2) and Screw J (x4).

Step 21

Assemble drawer sides (27, 29) to bottom panel (30) using Screw A (x16) and Screw B (x16).

Step 22

Attach drawer front panel (31) with Screw A (x8), Screw B (x8), and Screw P (x2).

Step 23

Assemble drawer sides (27, 37) to bottom panel (35) using Screw A (x8), Screw B (x8), and Screw P (x2).

Step 24

Attach drawer slides (D-DL/D-DR) to drawer sides (27, 28) using Screw D (x4) and Screw E (x16).

Step 25

Assemble drawer sides (27, 34) to bottom panel (28) using Screw A (x4) and Screw B (x4).

Step 26

Attach drawer front panel (36) with Screw A (x4), Screw B (x4), and Screw P (x1).

Step 27

Attach drawer slides (D-DL/D-DR) to drawer sides (27, 28) using Screw D (x1) and Screw E (x4).

Step 28

Assemble drawer sides (38, 40) to bottom panel (39) using Screw A (x12) and Screw B (x12).

Step 29

Attach drawer front panel (33) with Screw A (x12), Screw B (x12), and Screw P (x3).

Step 30

Attach drawer slides (D-DL/D-DR) to drawer sides (38, 39) using Screw D (x3) and Screw E (x12).

Step 31

Insert assembled drawers (31, 36, 33, 37) into the cabinet.

Step 32

Attach the Lovinöuse logo using Screw N (x1) and Screw Z (x1).

Final Safety Information

Serious or fatal crushing injuries can occur from furniture tip-over.

To further reduce the risk of serious injury and death from tip-overs:

Schwere oder tödliche Quetschverletzungen können durch Umkippen von Möbeln auftreten. Um das Risiko schwerer Verletzungen und Todesfälle durch Umkippungen weiter zu reduzieren.

Warranty Information

Warranty Claims

A 30-day warranty is provided for furniture defects or operational problems, starting from the purchase date, verified by proof of purchase.

For claims, contact customer service with your purchase order number and problem details. Replacement parts will be arranged within 48 hours. Shipping dates will be provided for out-of-stock items.

The product must be used according to instructions for health reasons.

Returned items must be cleaned and dried, and returned within 30 days of receipt.

Type of Warranty Claim

Failure to follow assembly instructions voids the warranty. Damage during installation is not covered, but damage during transportation is.

Scope of Responsibility

The manufacturer is not responsible for misuse, user damage, or loss of parts during installation.

Damage and scratches incurred after use are not covered by the warranty.

Warranty Coverage Areas (US)

• Sheet parts: 1 month from the date of purchase.
• Electrical parts: 1 month from the date of purchase.

Returns Policy

Changed Your Mind?

If you have changed your mind after purchase, please follow the retailer's specific return instructions.

Defective Items

If an item is defective and the cause is unclear, please contact customer service first.

Damaged Items

If you receive an order with obvious shipping damage, refuse the delivery. If damage is discovered after acceptance, follow the retailer's instructions. Always save all packaging material and paperwork. Disposing of packaging or returning merchandise without contacting the fulfillment center may jeopardize your claim and credit.