FUFU&GAGA Sideboard Assembly Instructions

Important Information

General Advice

Please read the entire manual before starting to assemble and/or use this product. Follow the manual thoroughly and keep it for further reference.

Assembly Tips

Avoid Scratches: To prevent scratching, assemble the furniture on a soft layer, such as a rug.

Improve Efficiency: Find a partner to assist with installation to speed up the process and shorten the time.

Anti-Topple Warning

Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, always use the wall attachment if provided. If not included, please purchase a suitable wall attachment for your wall. If unsure, seek professional advice. Please read and follow each step of the instructions carefully.

Important Maintenance Note

It is important to re-tighten any screws used in assembly approximately 2 weeks after assembly, and then every 3 months to ensure stability throughout the product's lifespan.

Cleaning: For the frame, use a rag dipped in neutral detergent, wipe thoroughly, and then dry with a clean rag. For glass parts, wipe with a damp cloth and glass cleaner, then dry with a dry rag.

Do not use an electric screwdriver, and do not apply excessive force during installation, as the board is prone to breaking.

Parts and Tools

Please prepare the following tools:

• [Screwdriver]
• [Drill]
• [Hammer]
• [Level]
• [Measuring Tape]
• [Allen Key]
• [Safety Glasses]

When installing, please carefully confirm whether each screw corresponds to the manual. Accessories with similar shapes can be distinguished by size.

Hardware List:

Assembly Steps

Step 1: Prepare Plates

Insert quickfit screw (A) into the pre-drilled holes on plates 2 and 3 using a screwdriver. Ensure the screws are fully seated.

Step 2: Attach Side Supports

Attach plate 7 to plate 3. Attach plate 6 to plate 2. Add cam lock (B) into plate 6 and 7, and turn clockwise to tighten (180° turn).

Step 3: Connect Center Panel

Attach plate 5 to plate 7 using screw (N). Add cam lock (B) into plate 7 and turn clockwise to tighten (180° turn).

Step 4: Connect Second Side Support

Attach plate 6 to plate 5. Add cam lock (B) into plate 6 and turn clockwise to tighten (180° turn).

Step 5: Prepare Top Panel

Insert quickfit screw (A) into the pre-drilled holes on plate 1 using a screwdriver.

Step 6: Install Dowels and Cam Locks

Knock wooden dowel (C) into plates 3, 5, and 2. Cover plate 1, then add cam lock (B) into plates 3, 5, and 2 and turn clockwise to tighten (180° turn).

Step 7: Attach Brackets and Handles

Fix part (F) to plates 1 and 2 with screw (J). Fix part (O) to plates 1 and 3 with screw (J).

Step 8: Install Back Panel and Base

Knock wooden dowel (C) into plates 3, 5, and 2. Fix plate 4 with screw (E).

Step 9: Attach Hinges to Doors

Fix hinge (K) to plate 8 and 11 with screw (D).

Step 10: Attach Doors to Cabinet

Attach door plates 8 and 11 to plates 2 and 3 by fixing hinges with screw (D).

Step 11: Attach Hinges to Drawer/Door Fronts

Fix hinge (M) to plate 10 and 9 with screw (D).

Step 12: Attach Drawer/Door Fronts

Attach door plates 9 and 10 to plate 5 by fixing hinges with screw (D).

Step 13: Adjust Doors

Adjust hinge screws to ensure proper door alignment.

Step 14: Install Anti-Tipping Device

Install the anti-tipping device using screws (E, G, H, I, L) as shown.

Safety Warnings

Anti-Tipple Device

WARNING: Children have died from furniture tipover. To reduce the risk of furniture tipover:

• ALWAYS install the tipover restraint provided.
• NEVER put a TV on this product.
• NEVER allow children to stand, climb, or hang on drawers, doors, or shelves.
• NEVER open more than one drawer at a time.
• Place heaviest items in the lowest drawers.

This is a permanent label. Do not remove!

Warranty Information

Warranty Claims

There is a 30-day warranty for broken furniture or other problems that do not work properly. The warranty starts from the date of purchase, which must be verified by proof of purchase.

Before making a claim, please call us. Provide your purchase order number and details of the problem for replacement parts. Replacements will be arranged within 48 hours. If out of stock, a shipping date will be provided.

The product must be used according to the provided instructions for health reasons.

For returns, furniture must be cleaned, dried, and operated within 30 days of receipt.

Type of Warranty Claim

Failure to follow furniture instructions will invalidate the warranty. Damage during installation is not covered, but damage during transportation is.

Scope of Responsibility

FUFU&GAGA shall not bear responsibility for misuse, user damage, or loss of parts during installation.

Damage and scratches after use are not covered by the warranty.

Warranty Coverage Areas (US)

• Sheet parts: 1 month from the date of purchase.
• Electrical parts: 1 month from the date of purchase.

Returns Policy

Changed Your Mind?

If you have changed your mind, please follow the retailer's instructions for returns.

Defective Items

If your item is defective and you cannot identify the cause, please call us first.

Damaged Items

If you receive an order with obvious shipping damage, refuse the delivery. If damage is found after acceptance, follow the retailer's specific instructions.

In all circumstances, save all packaging material and paperwork. Disposing of packaging or attempting to return merchandise without contacting the fulfiller may jeopardize your claim and credit.