Televes

Amplificatore da palo NanoKom (LTE700, 2do Dividendo Digitale)

3 ingressi: UHF-VHFmix-IFmix

The Televes NanoKom is a mast amplifier designed to amplify and mix terrestrial and satellite TV signals from various antennas. It features 3 inputs: the signal is amplified at the UHF input, while the VHF and IF(SAT) inputs are only mixed. It allows DC pass to the satellite input to power the LNB. RED compliant.

Art. 561621

EAN13 8424450203224

Other characteristics

Color: Arancione (Orange)

Physical data

Packaging

It stands out for

• Incorporates "USOS" (User Selectable Output Signal) technology: the installer selects the desired output level, which remains stable. The device automatically adjusts its gain to the input signal variations.
• Separate amplification and very low noise figure, which respects signal quality.
• Reduced ergonomic design.
• EasyF connection system.
• Can be powered by 12 to 24V.
• Fully automated production and subject to rigorous quality controls.
• High shielding chassis, constructed in Zamak.

Main characteristics

• LTE filter to eliminate telephone interference.
• ON/OFF switch to allow DC pass to the UHF input, to power a BOSS system.
• Simple mounting. Pole mounting strap included.
• Orange ABS plastic casing for outdoor installation.

Discover

EasyF connection system: simplicity and savings

EasyF is an innovative concept for connecting the internal conductor of the coaxial cable (the core), which is inserted directly into the device, increasing connection reliability. Furthermore, thanks to the absence of "F" connectors, the chassis can be reduced and the connection of two cables can be secured with a single screw.

• Real time savings: installation can be accelerated as coaxial cable connection is not required. The screwing process is also avoided.
• Connection reliability: the door that holds the cables prevents the coaxial cable from loosening.
• Economic savings: no additional connector (either "F" or "IEC") is required.
• Space optimization: inputs and outputs are always on the same side of the device, avoiding bending coaxial cables and facilitating work inside cabinets and distribution boxes.
• Very simple assembly in three steps: just connect and unscrew the covers to connect two cables:
  1. Unscrew the splitter cover to access the connection.
  2. Insert the pre-stripped coaxial cables.
  3. Close the cover and screw to secure the connection.

Learn more about the reliability of the EasyF system

With EasyF, the coaxial cable connection in the device is made via an automatic cable insertion system (internal conductor) for contact, without the need for soldering.

• Like the first day: the device's lifespan increases by eliminating possible solder deterioration over time.
• Reduction in failure rate: generally caused by cold solder joints.
• Optimization of electromagnetic performance: at high frequencies.
• Strengthening of our commitment to the environment: contamination caused by the soldering process is eliminated, and electricity consumption in production is reduced.

Technical characteristics: Ref. 561621