Baby Trend Sonar Switch Modular Travel System

Warranty Information

DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND FOR REPLACEMENT PARTS, SERVICE AND REPAIR.

The Baby Trend® warranty covers workmanship defects within the first 180 days of purchase. Any product subjected to misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, environmental exposure, alteration, or accident, or with an altered/removed serial number, invalidates all claims against the manufacturer. Any damage to property during installation is the sole responsibility of the end user.

Customer Service can be contacted at 1 (800) 328-7363, Monday through Friday, between 8:00 AM and 4:30 PM PST. Return Authorizations are required prior to returning products to Baby Trend®. Warranty is valid only in North America.

Spanish: NO DEVUELVA SU PRODUCTO A LA TIENDA. POR FAVOR CONTACTE A BABY TREND PARA PIEZAS DE REPUESTO, SERVICIO Y REPARACION. La garantía de Baby Trend® cubre defectos de fábrica dentro de los primeros 180 días de la compra. Cualquier producto sometido a uso indebido, abuso, uso anormal, desgaste excesivo, montaje incorrecto, negligencia, exposición ambiental, alteración o accidente, o con número de serie alterado o removido, anula todos los reclamos contra el fabricante. Cualquier daño a la propiedad durante la instalación es responsabilidad exclusiva del usuario final. El Departamento de Servicio al Cliente puede ser contactado al 1 (800) 328-7363 Lunes a viernes entre 8:00 AM y 4:30 PM (PST). Se requiere número de autorización antes de la devolución de productos a Baby Trend®. Garantía válida solo en América del Norte.

French: NE PAS RETOURNER VOTRE PRODUIT AU MAGASIN. VEUILLEZ CONTACTER BABY TREND POUR DES PIÈCES DE RECHANGE, ENTRETIEN ET RÉPARATION. La garantie Baby Trend® couvre les vices de fabrication dans les 180 jours suivant l'achat du produit. Tout produit soumis à un usage abusif, une utilisation anormale, une usure excessive, un montage incorrect, de la négligence, de l'exposition environnementale, de la modification ou un accident, ou avec un numéro de série modifié ou supprimé, annule toutes les réclamations contre le fabricant. Tout dommage à la propriété lors de l'installation est de la seule responsabilité de l'utilisateur final. Le service client peut être contacté au 1 (800) 328-7363 du lundi au vendredi 8h – 16h30 (PST). Une autorisation sera nécessaire avant de retourner le produit à Baby Trend®. Garantie valable uniquement en Amérique du Nord.

Contact Information

Baby Trend, Inc.
13048 Valley Blvd.
Fontana CA 92335

Phone: 1-800-328-7363 (8:00 AM ~ 4:30 PM PST)

Website: www.babytrend.com

General Instructions

Read all instructions BEFORE assembly and USE of product. KEEP INSTRUCTIONS FOR FUTURE USE.

Spanish: Lea todas las instrucciones ANTES de armar y USAR el producto. CONSERVE LAS INSTRUCCIONES PARA USO FUTURO.

French: Lisez toutes les instructions du manuel AVANT l'assemblage ou L'UTILISATION de ce produit. CONSERVEZ CES INSTRUCTIONS POUR RÉFÉRENCE ULTÉRIEURE.

Parts List

Check that you have all the parts for this model before assembling the stroller.

• Front Wheels (2x)
• Stroller Frame
• Seat
• Rear Wheels
• Bumper Bar
• Canopy
• Infant Car Seat / CS79
• Flex-Hold Cup Holder
• Parent Phone Holder

Important Warnings and Cautions

⚠️ WARNING: Please follow all of these instructions to ensure the safety of your child. Keep these instructions for future reference.

⚠️ WARNING: Failure to follow these instructions could result in serious injury or death. Avoid serious injury from falling or sliding out, always use the safety harness and ensure that the child is properly positioned according to these instructions.

⚠️ WARNING: Stroller is used for one child, always use the safety harness and ensure the child is properly positioned according to these instructions.

⚠️ WARNING: Wheel can detach and cause tip over. Pull on the wheel to assure it is securely attached.

⚠️ WARNING: Care must be taken when folding and unfolding the stroller to prevent finger entrapment.

⚠️ WARNING: Child may slip into leg openings and strangle. NEVER use in full recline position unless the seat is in full recline and footrest buckle released.

? CAUTION: This single stroller is designed for one child only. Use with more than one child may cause an unbalanced condition which can injure/harm your child.

Additional Cautions:

• Purses, shopping bags, parcels, diaper bags, or accessory items may change the balance of the stroller and cause a hazardous, unstable condition.
• ONLY the seat that comes with this travel system can be used on the frame.
• The maximum weight that can be carried in the storage basket is 5 pounds (2.27kg).
• The maximum weight that can be carried in the cup holder is 1 pound (0.45kg).
• Be certain the stroller is completely opened and locked in place before allowing a child near the stroller.
• The combined maximum weight for the stroller is 50 lbs. (22.67 kg), including the child, storage basket, and cup holder. Do not exceed the weight limit. Additional weight on the stroller will cause excessive wear and stress and may cause a hazardous, unstable condition.
• The maximum weight for the infant car seat is 35lb (15.87kg).
• NEVER leave child unattended.
• NEVER use the stroller on stairways or escalators.
• NEVER use the stroller with roller skates, in-line skates, skateboards, or bicycles.
• NEVER allow your stroller to be used as a toy.

Assembly: Front Wheels

IMPORTANT! To ensure safe operation of your stroller, please follow these instructions carefully. Keep these instructions for future reference.

IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts, or sharp edges. NEVER use if any parts are missing or broken.

IMPORTANT! Adult assembly is required.

Remove stroller from box. The front and rear wheels MUST be installed prior to use.

To attach the front wheels, unfold stroller as described:

1. Unlock the fold latch (See Figure 1a). Unfold stroller frame by pulling upward on the stroller handle until the frame locks (See Figure 1b).
2. Lean the stroller backwards and push each front wheel assembly into the front wheel housing until they lock into place (See Figure 1c). NOTE: Pull on the wheel assembly to ensure it is securely attached to the stroller.

Assembly: Rear Wheels

1. Attach the rear wheels onto the stroller frame until they click into place (See Figure 2). NOTE: Pull on the rear wheel assembly to ensure it is securely attached to the stroller.

Assembly: Basket

The rear basket needs to be installed prior to use. Pull the basket fabric under the bar before installing.

1. Insert the male ends of the rear basket frame into the female slots on the stroller frame until it locks into place (See Figure 3a).
2. Always required: Secure the shorter straps with D-rings around the bar underneath the rear axle as shown in (See Figure 3b). Thread each strap completely through the D-ring opening to create a loop. Ensure straps are secure to the bar before using the stroller.
3. Detach the basket by pushing the button on each side of the stroller frame and pull the basket out (See Figure 3c). NOTE: Soft goods can be removed by sliding the fabric from the tube of the rear basket and removing the D-rings.

Assembly: Attaching the Seat

1. Unfold the toddler seat fully (See Figure 4a).
2. Insert both tabs of the toddler frame into the toddler seat fabric (See Figure 4b).
3. To assemble the toddler seat, connect the lower tube into the inner slot of the seat frame, until it clicks into place (See Figure 4c). Repeat for the other side.
4. Feed the strap through the tab to anchor the seat fabric on the seat frame, ensure the toddler seat is secured (See Figure 4d). Repeat for the other side.
5. Attach the seat by lining up the seat anchors on the side of the seat with the anchors on the stroller frame and pushing them together until they click securely (See Figure 4e). The seat can face in either direction, frontward or backward.
6. Carriage Mode: Make sure the buckle strap underneath the seat is loosened. Then loosen the recline seat strap by squeezing the adjuster and pulling downwards (See Figure 4f). The carriage should be fully extended before using. NOTE: The footrest area should be unbuckled (See Figure 4g).

Assembly: Bumper Bar

⚠️ WARNING: Do not use bumper bar to lift or carry seat with child inside. The bumper bar is not a carrying handle.

1. Attach the bumper bar by lining up anchors with the slots on the seat. Push until it locks into place (See Figure 5a). NOTE: The bumper bar must be securely attached before using this product.
2. To detach the bumper bar, press the release button on the bottom of the bar on each side, and pull bar out of the anchors (See Figure 5b).

Assembly: Adjusting the Seat

⚠️ WARNING: The upright position should be used only for a child that is at least 6 months old.

1. Toddler Seat Mode: The seat can be adjusted into an upright, reclined position. Push the center button on both sides of the stroller adaptor to rotate the seat (See Figure 6a).
2. Rotate the seat into the desired position until it clicks into place (See Figure 6b). The seat can face in either direction, frontward or backward.
3. Buckle the strap located underneath the seat (See Figure 6c). To tighten the strap, use the hook and loop method through the clip. Pull the strap firmly and attach. NOTE: To adjust the recline seat strap, squeeze the adjuster while pulling downwards or upwards (See Figure 6d).

Assembly: Parent Phone Holder

1. To attach the parent phone holder: Slide the clip on the phone tab located on the stroller handle until it's tightly secured (See Figure 7). To release, simply pull the parent phone holder upwards.

Assembly: Cup Holder

⚠️ WARNING: To avoid burns, never put hot liquids in a cup holder. Avoid possible tipping, do not place more than 1lb. (0.45kg) in a cup holder.

1. To attach the cup holder: Slide the clip on the cupholder over the cup holder tab on the handle bar. Push until firmly in place (See Figure 8).

Assembly: Removable Canopy

1. To attach the removable canopy: Slide the canopy clips on the inside of the corresponding slots on the stroller frame (See Figure 9a).
2. Pull over the back of the canopy fabric to connect the three attachments located on the top of the seat frame (See Figure 9b).
3. To open the canopy: Push forward on the front edge of the canopy while holding the rear of the canopy in place (See Figure 9c).
4. To fold the canopy: Pull backwards on the front edge (See Figure 9d).
5. To remove the canopy: Press inward on both canopy tabs and slide the canopy up to remove (See Figure 9e).

Assembly: Brakes

⚠️ WARNING: Always set brakes when the stroller is not being pushed so that the stroller will not roll away. NEVER leave stroller unattended on a hill or incline as the stroller may slide down the hill.

1. To engage brakes, apply downward pressure to the rear of the brakes (See Figure 10a). NOTE: Check that the stroller will not move once the brakes are properly applied.
2. To release, apply downward pressure to the front of the brakes (See Figure 10b).

Safety: To Secure the Child

⚠️ WARNING: Avoid serious injury from falling or sliding out. Always use the safety harness.

⚠️ STRANGULATION HAZARD: Child can strangle in loose straps. Never leave child in seat when straps are loose or undone.

Type 1 Harness:

1. The shoulder straps of the 5-point harness have 3 attachment positions. Select the position that places the shoulder strap level with, or below the top of the child's shoulder (See Figure 11a). To adjust harness height, unhook the shoulder strap from the crotch buckle. Feed the shoulder strap through the harness spread slots. You can access these slots from the rear of the seat underneath the fabric. Feed shoulder strap through the appropriate slot and reattach the shoulder strap to the crotch buckle.
2. Carefully place the child in the stroller seat and bring the safety harness around the child's waist and over the child's shoulders. Place the crotch strap between the child's legs. Insert the male end of each shoulder/waist belt into the buckle on the crotch strap. Tighten the harness so it is snug around the child's waist and over the child's shoulders (See Figure 11b).

Safety: To Release the Child

1. To release, push the button on the center clasp and the two harness buckles will pop free (See Figure 12).
2. Unhook the shoulder straps only if adjusting the harness positions (See Figure 13).

Folding and Unfolding

To Fold Stroller:

⚠️ WARNING: Care must be taken when folding and unfolding the stroller to prevent finger entrapment.

? CAUTION: Do not allow children near stroller while folding.

NOTE: The stroller can be folded with or without the seat installed.

1. Before folding the stroller, push the lower buttons on each side of the seat to disengage from the stroller frame (See Figure 14a). DO NOT remove with child in the stroller seat.
2. To fold the stroller, press the button on the left trigger, while pulling both release triggers simultaneously (See Figure 14b) and push the stroller handle toward the floor.
3. Make sure the front wheels lie flat, then secure the stroller in the folded position by locking the fold latch, located on the right side of the stroller, over the rivet (See Figure 14c).

To Unfold Stroller:

? CAUTION: Do not allow children near stroller while unfolding.

1. Unlock the fold latch (See Figure 15a) and unfold stroller frame by pulling upward on the stroller handle until the frame locks (See Figure 15b). The bar will lock when the legs are fully extended.

Infant Car Seat Attachment and Removal

Attaching the Infant Car Seat:

⚠️ WARNING: Avoid serious injury from falling or sliding out, always use the Infant Car Seat harness.

1. Attach the car seat by lining up the seat anchors to the stroller frame and push them together until they lock securely (See Figure 16). The seat can face in either direction, frontward or backward.

To Remove the Infant Car Seat:

1. To take off the infant car seat, push both center buttons on each side of the seat and lift the seat upwards (See Figure 17). DO NOT remove with child in the stroller seat.

Information: Riding Positions (6 Modes)

Toddler Seat Mode: The seat can face in either direction, front or backwards.

Carseat Mode: The seat can face in either direction, front or backwards.

Carriage Mode: The seat can face in either direction, front or backwards.

Maintenance

Front Wheel Removal:

If adjustment or replacement is necessary:

1. Push release button on the inside of the wheel hub and pull wheel assembly from hub (See Figure 18).

Care and Maintenance:

Seat Pad:

• To clean the seat pad, use only mild household soap or detergent and warm water on a sponge or clean cloth.

Other:

• Check your stroller regularly for loose screws, worn parts, torn material, or stitching. Replace or repair parts as needed.

MAINTENANCE AND CLEANING INSTRUCTIONS: Use only household mild soap and warm water. DO NOT USE BLEACH.

Customer Service

BABY TREND® CUSTOMER SERVICE

The Customer Service Department can be contacted at 1 (800) 328-7363 Monday through Friday between 8:00 AM and 4:30 PM (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®. Warranty only valid in North America.

BABY TREND® SERVICIO AL CLIENTE

El Departamento de Servicio al Cliente puede ser contactado a 1 (800) 328-7363 Lunes a viernes entre 8:00 AM y 4:30 PM (PST). Un número de autorización es requerido antes de la devolución de los producto(s) a Baby Trend®. Garantía válida sólo en América del Norte.

BABY TREND® SERVICE CLIENT

Le service client peut être contacté au 1 (800) 328-7363 du lundi au vendredi 8 h – 16 h 30 (PST). Une autorisation sera nécessaire avant de retourner le produit à Baby Trend®. Garantie valable uniquement en Amérique du Nord.