Baby Trend Passport Switch Modular Travel System

Warranty Information

Warranty: Baby Trend® warrants workmanship defects within 1 year of purchase. Misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, environmental exposure, alteration, accident, or alteration/removal of the serial number invalidates all claims. Property damage during installation is the end user's sole responsibility.

Customer Service can be contacted at 1 (800) 328-7363, Monday through Friday, 8:00 a.m. to 4:30 p.m. (PST). Return Authorizations are required before returning products. Visit babytrend.com/pages/limited-warranty for complete details.

Garantía: La garantía de Baby Trend® cubre defectos de fábrica por 1 año después de la compra. Cualquier producto sometido a uso inadecuado, abuso, uso anormal, desgaste excesivo, montaje incorrecto, negligencia, exposición ambiental, alteración o accidente, o con el número de serie alterado o removido, anula todos los reclamos. Cualquier daño a la propiedad durante la instalación es responsabilidad exclusiva del usuario final.

El Departamento de Servicio al Cliente está disponible llamando al 1 (800) 328-7363, de lunes a viernes de 8:00 a.m. a 4:30 p.m. (PST). Se requiere una Autorización de Devolución antes de poder devolver el o los productos a Baby Trend®. Visite babytrend.com/pages/limited-warranty para conocer todos los detalles de la garantía.

Parts Identification

Before assembly, check that you have all the parts for this model:

• Stroller
• Seat
• Front Wheels (2x)
• Rear Wheels
• Canopy
• Bumper Bar
• Flex-Hold Cup Holder
• Parent Phone Holder
• Infant Car Seat
• Base (Refer to the infant car seat manual for base type and instructions)

Assembly Instructions

IMPORTANT: Follow all instructions carefully for safe operation. Keep for future reference.

IMPORTANT: Before assembly and each use, inspect for damaged hardware, loose joints, missing parts, or sharp edges. NEVER use if parts are missing or broken.

IMPORTANT: Adult assembly is required. Keep children away during unpacking and assembly.

Remove stroller from box. Front and rear wheels MUST be installed prior to use.

Front Wheels

1. Unlock the fold latch and unfold stroller frame by pulling upward on the stroller handle until the frame locks.
2. Lean the stroller backwards. Align the slot on the front wheel housing with the front wheels.
3. Push in the pin while inserting the front wheel until it locks into place. Pull on the wheel assembly to ensure it is securely attached.

Rear Wheels

1. Attach the rear wheels onto the stroller frame until it clicks into place. Pull on the rear wheel assembly to ensure it is securely attached.

Basket

The rear basket needs to be installed prior to use. Pull the basket fabric under the bar before installing.

1. Insert the male ends of the rear basket frame into the female slots on the stroller frame until it locks into place.
2. Secure the shorter straps with D-Rings around the bar underneath the rear axle. Thread each strap completely through the D-ring opening to create a loop. Ensure straps are secure to the bar before using the stroller.
3. Detach the basket by pushing the button on each side of the stroller frame and pull the basket out.

Attaching the Seat

1. Unfold the toddler seat fully.
2. Insert both tabs of the toddler frame into the toddler seat fabric.
3. Connect the lower tube into the inner slot of the seat frame until it clicks into place. Repeat for the other side.
4. Feed the strap through the tab to anchor the seat fabric on the seat frame, ensuring the toddler seat is secured. Repeat for the other side.
5. Attach the seat by lining up the seat anchors on the side of the seat with the anchors on the stroller frame and pushing them together until they click securely. The seat can face in either direction, frontward or backward.
6. Carriage Mode: Ensure the buckle strap underneath the seat is loosened. Loosen the recline seat strap by squeezing the adjuster and pulling downwards. The carriage should be fully extended before using. The footrest area should be unbuckled.

Bumper Bar

WARNING: Do not use the bumper bar to lift or carry the seat with a child inside. The bumper bar is not a carrying handle.

WARNING-FALL HAZARD: The bumper bar is not designed to support a car seat; the stroller may become unstable.

1. Attach the bumper bar by lining up anchors with the slots on the seat. Push until it locks into place. The bumper bar must be securely attached before using this product.
2. To detach the bumper bar, press the release button on the bottom of the bar on each side, and pull the bar out of the anchors.

To Adjust Seat

WARNING: The upright position should be used only for a child that is at least 6 months old.

1. Toddler Seat Mode: The seat can be adjusted into an upright or reclined position. Push the center button on both sides of the stroller adaptor to rotate the seat. Rotate the seat into the desired position until it clicks into place. The seat can face in either direction, frontward or backward.
2. Buckle the strap located underneath the seat. To tighten the strap, use the hook and loop method through the clip. Pull the strap firmly and attach.
3. To adjust the recline seat strap: Squeeze the adjuster while pulling downwards or upwards.

Parent Phone Holder

1. To attach the parent phone holder: Slide the clip on the phone tab located on the stroller handle until it's tightly secured. To release, simply pull the parent phone holder upwards.

Cup Holder

WARNING: To avoid burns, never put hot liquids in a cup holder. Avoid possible tipping; do not place more than 1 lb. (0.45kg) in a cup holder.

1. To attach the cup holder: Slide the clip on the cupholder over the cup holder tab on the handle bar. Push until firmly in place.

Removable Canopy

1. To attach the removable canopy: Slide the canopy clips on the inside of the corresponding slots on the stroller frame.
2. Pull over the back of the canopy fabric to connect the three attachments located on the top of the seat frame.
3. To open the canopy: Push forward on the front edge of the canopy while holding the rear of the canopy in place.
4. To fold the canopy: Pull backwards on the front edge.
5. To remove the canopy: Press inward on both canopy tabs and slide the canopy up to remove.

Safety

Brakes

WARNING: Always set brakes when the stroller is not being pushed so that the stroller will not roll away. NEVER leave stroller unattended on a hill or incline as the stroller may slide down the hill.

1. To engage brakes, apply downward pressure to the rear of the brakes. NOTE: Check that the stroller will not move once the brakes are properly applied.
2. To release, apply downward pressure to the front of the brakes.

To Secure the Child

WARNING: Avoid serious injury from falling or sliding out. Always use the safety harness.

STRANGULATION HAZARD: Child can strangle in loose straps. Never leave child in seat when straps are loose or undone.

1. The shoulder straps of the 5-point harness have 3 attachment positions. Select the position that places the shoulder strap level with, or below the top of the child's shoulder. To adjust harness height, unhook the shoulder strap from the crotch buckle. Feed the shoulder strap through the harness spread slots (accessible from the rear of the seat underneath the fabric). Feed shoulder strap through the appropriate slot and reattach the shoulder strap to the crotch buckle.
2. Carefully place the child in the stroller seat and bring the safety harness around the child's waist and over the child's shoulders. Place the crotch strap between the child's legs. Insert the male end of each shoulder/waist belt into the buckle on the crotch strap. Tighten the harness so it is snug around the child's waist and over the child's shoulders.

To Release the Child

1. To release, push the button on the center clasp and the two harness buckles will pop free.
2. Unhook the shoulder straps only if adjusting the harness positions.

To Fold Stroller

WARNING: Care must be taken when folding and unfolding the stroller to prevent finger entrapment.

CAUTION: Do not allow children near stroller while folding.

OPTIONAL: The stroller can be folded with the seat (must be in toddler seat mode position) or without the seat installed. DO NOT remove the seat while child is inside.

1. Before folding the stroller, push the lower buttons on each side of the seat to disengage from the stroller frame.
2. To fold the stroller, press the button on the left trigger, while pulling both release triggers simultaneously and push the stroller handle toward the floor.
3. Make sure the front wheels lie flat, then secure the stroller in the folded position by locking the fold latch, located on the right side of the stroller, over the rivet.

To Unfold Stroller

CAUTION: Do not allow children near stroller while unfolding.

1. Unlock the fold latch and unfold stroller frame by pulling upward on the stroller handle until the frame locks.

Infant Car Seat

THE INFANT CAR SEAT

WARNING: To avoid serious injury from falling, ALWAYS use the safety belt to secure the car seat.

ATTENTION: CS01 EZ-Lift, CS02 EZ-Lift PLUS and CS03 EZ-Lift PRO Infant Car Seats must attach to the module of the stroller's front seat. These models require child tray and seat back adjustment to the most reclined position. NOTE: To make seat position adjustments refer to step 6d.

CS01 EZ-Lift, CS02 EZ-Lift PLUS and CS03 EZ-Lift PRO Infant Car Seats

1. Align the car seat module to the inner frame connectors. Latch the module into the stroller frame. Underneath the car seat's handle hub, carefully align it to the modular towers of the stroller frame. Press down firmly for the click. ALWAYS ensure that the car seat is properly connected and locked onto the stroller before each use by lifting up on the car seat handle.

Removing the Car Seat:

• NOTE: Set handle to the carry position. Squeeze the release handle located at the top-rear of the car seat and lift away from the stroller.

Modes

Riding Positions - 6 Modes

Toddler Seat Mode

Face in either direction, front or backwards.

Car Seat Mode

Face in either direction, front or backwards.

Carriage Mode

Face in either direction, front or backwards.

Maintenance

Front Wheel Removal

If adjustment or replacement is necessary:

1. Turn the front wheel backwards and locate the pin. Push the pin inside the wheel housing to remove the wheel(s).

Care and Maintenance

• Seat Pad: To clean the seat pad, use only mild household soap or detergent and warm water on a sponge or clean cloth.
• Other: Check your stroller for loose screws, worn parts, torn material or stitching on a regular basis. Replace or repair parts as needed.

MAINTENANCE AND CLEANING INSTRUCTIONS: Use only household mild soap and warm water. DO NOT USE BLEACH.

Baby Trend Customer Service

The Customer Service Department can be contacted at 1 (800) 328-7363 Monday through Friday between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®.

Baby Trend Servicio al Cliente

El Departamento de Servicio al Cliente puede ser contactado a 1 (800) 328-7363 Lunes a viernes entre 8:00 a.m. y 4:30 p.m. (PST). Un numero de autorizacion es requerido antes de la devolución de los producto(s) a Baby Trend®.