Assembly Instructions - BM328373
General Assembly Guidelines
Important: Please read these instructions carefully and keep them for future reference.
Before starting assembly, verify that all parts and hardware are present by referring to the parts list. If any items are missing, damaged, or incorrect, contact the manufacturer or retailer for replacements before proceeding.
Assemble all parts on a soft, clean, and flat surface, such as a carpet, to prevent scratches.
To ensure proper alignment of holes, do not fully tighten screws until all components are in place.
Electric Screwdriver Use: When using an electric screwdriver, reduce the power and torque settings to avoid damaging the furniture.
Parts and Hardware List
| Item | Description | Quantity |
|---|---|---|
| A | Desk Surface | 3 pcs |
| B | Leg Frame | 2 pcs |
| C | Crossbar | 2 pcs |
| D | Side Support | 2 pcs |
| E | Back Support | 1 pc |
| F | Side Panel | 2 pcs |
| Hardware 1 | Screw (e.g., M4x30mm) | 12 pcs |
| Hardware 2 | Screw (e.g., M4x12mm) | 4 pcs |
| Hardware 3 | Screw (e.g., M6x50mm) | 4 pcs |
| Hardware 4 | Screw (e.g., M6x30mm) | 2 pcs |
| Hardware 5 | Screw (e.g., M6x15mm) | 4 pcs |
| Hardware 6 | Screw (e.g., M6x12mm) | 8 pcs |
| Hardware 7 | Screw (e.g., M6x10mm) | 10 pcs |
| Hardware 8 | Wooden Dowel (e.g., 8x30mm) | 8 pcs |
| Hardware 9 | Cam Lock | 4 pcs |
| Hardware 10 | Cam Bolt | 4 pcs |
| Allen Key | 4mm Allen Key | 1 pc |
Assembly Steps
Step 1
Connect two leg frames (Part B) to the underside of a desk surface (Part A) using screws (Hardware 1) and dowels (Hardware 8). Ensure proper alignment before tightening.
[Diagram Description: Shows two leg frames being attached to the first desk surface using screws and dowels.]
Step 2
Attach crossbars (Part C) between the leg frames (Part B) using screws (Hardware 3) and cam lock/bolt sets (Hardware 9 & 10). Securely fasten these components.
[Diagram Description: Illustrates attaching crossbars between the leg frames using screws and cam lock/bolt mechanisms.]
Step 3
Attach the second desk surface (Part A) to the leg frames (Part B) using screws (Hardware 1) and dowels (Hardware 8). Align carefully before tightening.
[Diagram Description: Depicts attaching a second desk surface to the assembled leg structure with screws and dowels.]
Step 4
Attach the side supports (Part D) to the desk structure using screws (Hardware 5) and cam lock/bolt sets (Hardware 9 & 10). Ensure they are firmly in place.
[Diagram Description: Shows side supports being attached to the desk frame using screws and cam lock/bolt sets.]
Step 5
Attach the back support (Part E) to the desk structure using screws (Hardware 6) and cam lock/bolt sets (Hardware 9 & 10). This adds stability.
[Diagram Description: Illustrates attaching the back support to the desk frame with screws and cam lock/bolt mechanisms.]
Step 6
Attach the third desk surface (Part A) to the structure using screws (Hardware 1) and dowels (Hardware 8). Ensure all connections are snug.
[Diagram Description: Depicts attaching the third desk surface to the main structure using screws and dowels.]
Step 7
Attach the side panels (Part F) to the desk structure using screws (Hardware 7). Secure all connections.
[Diagram Description: Shows side panels being attached to the desk frame using screws.]
Step 8
Attach the remaining side panels (Part F) to the desk structure using screws (Hardware 7). Ensure the desk is stable and all parts are secured.
[Diagram Description: Illustrates attaching the final side panels to the desk frame with screws.]
