Tribesigns DX-JW0007 Corner Table Assembly Instructions
Model: DX-JW0007
General Notes
Do not tighten screws completely at first. Tighten screws at last when all parts are put together to ensure proper alignment and prevent disassembly.
Parts List
- 1: Tabletop component
- 2: Tabletop component
- 3: Shelf component
- 4: Shelf component
- 5: Shelf component
- 6: Shelf component
- 7: Shelf component
- 8: Shelf component
- 9: Shelf component
- 10: Shelf component
- 11: Frame component
- 12: Frame component
- 13: Frame component
- 14: Shelf unit
- 15: Shelf unit
- 16: Long support bar (1060x20)
- 17: Long support bar (1080x20)
- 18: Long support bar (1060x20)
- 19: Short support bar (1060x20)
- 20: Short support bar (1080x20)
- 21: Small connector rod
- 22: Panel
- 23: Panel
- 24: Panel
- 25: Panel
- 26: Panel
- 27: Panel
Hardware List
- A: M5x50 (8PCS)
- B: M5x70 (20PCS)
- D: M6x25 (4PCS)
- E: M6x30 (2PCS)
- F: M6x35 (24PCS)
- G: M6x50 (16PCS)
- I: M6x70 (2PCS)
- L: M6 (2PCS)
- V: M4x18 (12PCS)
- S: M8 (8PCS)
- K: M8 (8PCS)
- Y: Connector (5PCS)
Assembly Steps
Step 1-2: Assemble the main frame components (11, 12, 13) using hardware as indicated in the diagrams. Note the placement of Y connectors.
Step 3-6: Attach shelf components (5, 6, 10) to the frame using hardware F and G. Ensure correct orientation.
Step 7-8: Attach the drawer unit components (5, 6) and shelf components (7, 8) to the frame using hardware D and G.
Step 9-10: Attach the tabletop components (1, 2) to the frame using hardware B and F.
Step 11-13: Assemble the bookshelf unit (14, 15) and attach it to the desk structure using hardware F and V.
Step 14-15: Attach the remaining shelf components (3, 4, 9) and support bars (16, 17, 18, 19, 20) using hardware B, F, and V.
Step 16-18: Final assembly and tightening of all screws. Ensure the desk is stable and level.
Additional Assembly Detail: The diagrams show specific hardware (e.g., F+V, G+Y) used in various connection points. Pay close attention to the quantities and types of hardware specified for each step.
Drawer Assembly: A separate diagram illustrates the assembly of a drawer unit using part K and hardware B, E.
Customer Support
Thanks for choosing Tribesigns File cabinets. If you have any installation problems or any damages caused by shipping, please contact Tribesigns customer service at support@tribesigns.com. Visit www.tribesigns.com for more information.
