Tribesigns DX-C0281 Corner Computer Desk Assembly Instructions
Model: DX-C0281
General Assembly Notes
Important: Do not tighten screws completely at first. This allows for adjustments if parts are assembled incorrectly and need disassembly. Tighten all screws securely only when all parts are put together.
Parts List and Hardware
The assembly requires various parts and hardware. Refer to the diagrams for identification. Key hardware includes:
- G: M6x35 screws (22PCS)
- H: M6x40 screws (35PCS)
- V: M6 screws (2PCS)
- Y: Small parts/connectors (10PCS)
Parts Overview (Diagrammatic Representation):
- Part 1: Large flat panel (desk surface)
- Part 2: Smaller flat panel (desk surface)
- Part 3: Flat panel with shelf supports
- Part 4: Frame section (left side)
- Part 5: Frame section (middle)
- Part 6: Frame section (right side, with shelves)
- Part 7: Vertical support frame
- Part 8: Vertical support frame
- Part 9: Shelf panels (2PCS)
- Part 10: Shelf panels (2PCS)
- Part 11: Small connecting pieces (2PCS)
- Part 12: Long connecting bar
- Part 13: Long connecting bar
- Part 14: Long connecting bar
- Part 15: Long connecting bar
- Part 16: Long connecting bar
- Part 17: Long connecting bar
Assembly Steps
Step 1-3: Assembling the Frame
Begin by assembling the main frame sections (Parts 4, 5, 6, 7, 8) using the provided screws (G, H, V) and connectors (Y). Follow the sequence shown in the diagrams, connecting the vertical supports and frame pieces to form the basic structure of the desk.
Step 4-6: Attaching Desk Surfaces and Shelves
Attach the desk surface panels (Parts 1, 2, 3) to the assembled frame using screws (G, H). Install the shelf panels (Parts 9, 10) into the designated frame sections (Part 6 and the right-side unit) using screws (H).
Step 7-11: Connecting and Reinforcing
Use the long connecting bars (Parts 12, 13, 14, 15, 16, 17) to join the different sections of the desk, particularly connecting the L-shape components and reinforcing the structure. Secure these with screws (H).
Step 12-17: Final Assembly and Tightening
Continue assembling the remaining parts, ensuring all connections are made as per the diagrams. Once all components are in place, go back and fully tighten all screws.
Final Check
Ensure the desk is stable and all parts are securely fastened.
Customer Support
Thanks for choosing Tribesigns desk. Your satisfaction is our priority.
If you encounter any installation problems or receive damaged parts due to shipping, please contact Tribesigns customer service at support@tribesigns.com. They will assist you in resolving any issues.
For more information, visit www.tribesigns.com.
