Installation Product Manual

Important Information

IMPORTANT INFORMATION! Please read the entire manual before starting to assemble and/or using this product. Follow the manual thoroughly and keep it for further reference.

AVOID SCRATCHES! In order to avoid scratching this furniture, it should be assembled on a soft layer, such as a rug.

IMPROVE EFFICIENCY! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time.

ANTI-TOPPLE WARNING! Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure to use the anti-tip device provided. If not included with this product, please purchase a wall attachment that fits your wall. If unsure, seek professional advice. Please read and follow each step of the instructions carefully.

IMPORTANT! It is important that any product assembled using screws is re-tightened 2 weeks after assembly, and once every 3 months, to assure stability throughout the lifespan of the product.

For regular maintenance and cleaning of the product:

• For the frame, please use a rag dipped in neutral detergent to fully wipe it, and then dry it with a clean rag.
• For glass materials, wipe with a rag dampened with water glass cleaner, and then dry with a dry rag.

Do not use an electric screwdriver, and do not use too much force when installing, because the board is easy to break.

Tools and Parts

Please prepare the following tools: [screwdriver], [drill], [hammer], [allen key].

When installing, please carefully confirm whether each screw corresponds to the manual. Accessories with similar shapes can be distinguished by size.

Parts List:

• A x 36 (M5 x 42 mm)
• B x 36 (Ø15 x 12 mm)
• C x 24 (Ø8 x 40 mm)
• D x 72 (M3.5 x 12 mm)
• E x 40 (M3.5 x 14 mm)
• F x 8 (M3.5 x 14 mm)
• G x 8 (M8 x 40 mm)
• H x 12 (DW)
• I x 4 (220-96)
• J x 6 (M4 x 18 mm)
• K x 12 (Ø12 x 0.4 x 1.0)
• L x 12 (1.5 x 15 mm)
• M x 25 (15 x 10)
• N x 25 (BBK)
• O x 20
• P x 2 (SETS)
• x 1 (#5)

Assembly Overview

Diagram showing an exploded view of the cabinet components, labeled with numbers 1 through 15.

Assembly is recommended for 2 adults. ?‍?‍?

WARNING: Children have died from furniture tipover. To reduce the risk of furniture tipover:

• ALWAYS install the anti-tip device provided.
• NEVER put a TV on this product.
• NEVER allow children to stand, climb, or hang on drawers, doors, or shelves.
• NEVER open more than one drawer at a time.
• Place heaviest items in the lowest drawers.

This is a permanent label. Do not remove!

Assembly Steps

Step 1

Fix leg part 15 to panel 5 using screw (G) as shown.

Step 2

Screw eccentric rod (A) into panel 5 as shown.

Step 3

Screw eccentric rod (A) into panel 8 as shown. Connect panel 8 to panel 10, add cam lock (B) into panel 10 and turn clockwise to tighten as shown.

Step 4

Attach panel 5 to panel 8 using wooden dowel (C), add cam lock (B) into panel 8 and turn clockwise to tighten as shown.

Step 5

Screw eccentric rod (A) into panel 6 and 7 at first. Fix leg part 15 to panel 6 using screw (G) as shown. Attach panel 7 to panel 6 using wooden dowel (C), add cam lock (B) into panel 7 and turn clockwise to tighten as shown.

Step 6

Screw eccentric rod (A) into panel 4 and 7 at first. Fix leg part 15 to panel 4 using screw (G) as shown. Attach panel 7 to panel 4 using wooden dowel (C), add cam lock (B) into panel 7 and turn clockwise to tighten as shown.

Step 7

Connect the two components with panel 9 and 8 using wooden dowel (C), add cam lock (B) into panel 9, 4, 6 and turn clockwise to tighten as shown.

Step 8

Fix part (I) to panel 4, 5 and 6 with screw (E) as shown.

Step 9

Insert back panel 13 and 14 along available grooves at first. Fix back panels to the item using screw (F) and knock wooden dowel (C) into panel 7 and 8 as shown.

Step 10

Screw eccentric rod (A) into panel 1, 2 and 3 as shown. Knock wooden dowel (C) into panel 1 and 3 as shown.

Step 11

Attach panel 2 to panel 8 at first. Connect panel 1 and 3 to panel 2, then attach to panel 7 as shown.

Step 12

Make sure positions 1, 2, and 3 are correct before locking B. Add cam lock (B) into panel 7, 1, 8 and 3, and turn clockwise to tighten as shown.

Step 13

Insert buckle (O) into back slots and fix with screw (E) as shown. Fix iron sheet part (N) to the gaps using nail (M) as shown.

Step 14

Fix hinge (H) to panel 11 with screw (D), fix handle (J) with washer (L) and screw (K) as shown. Attach door panel 11 to panel 7 and 8 by fixing hinge with screw (D) as shown.

Step 15

Fix hinge (H) to panel 12 with screw (D), fix handle (J) with washer (L) and screw (K) as shown. Attach door panel 12 to panel 8 by fixing hinge with screw (D) as shown.

Step 16

Install anti-tipping device as shown.

Step 17

[Diagrams showing hinge adjustment procedures.]

Warranty Information

WARRANTY CLAIMS

• There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase, which must be verified by proof of purchase.
• Before making a claim, please call us. Please leave your purchase order number and details of the problem. We will respond within 48 hours. If a part is out of stock, we will reply with a shipping date.
• The product must be used in accordance with the instructions provided.
• If the furniture needs to be returned for other reasons, it must be cleaned and dried and returned within 30 days of receipt.

Type of Warranty Claim

• Failure to follow the furniture instructions will invalidate the warranty.
• Damage during installation is not covered, but damage during transportation is included.

Scope of responsibility

• The manufacturer shall not bear any responsibility for misuse or user damage and/or loss of parts during the installation of furniture.
• Damage and scratches after use are not covered by the warranty.

The Warranty Relates to All Bought in The US and Covers The Following Areas:

• Sheet parts: 1 month from the date of purchase.
• Electrical parts: 1 month from the date of purchase.

Returns Policy

CHANGED YOUR MIND AND NEED TO RETURN YOUR ITEM?

PLEASE FOLLOW THE BELOW INSTRUCTIONS:

• If you have purchased and simply changed your mind, follow the retailer's instructions for returns.

DEFECTIVE ITEMS

• If your item is defective in any way, i.e., it doesn't work but you can't identify why, please call us first.

DAMAGED ITEMS

• If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused. If the delivery has been accepted and then shipping damage is found, please follow the specific instructions advised by the retailer.

In all circumstances, please save all packaging material and paperwork for the order. Please be aware that if you dispose of packaging material or attempt to return the merchandise without contacting the fulfiller, you jeopardize your chances of making a claim, and you may not receive credit for the return.