VINGLI Storage Cabinet Assembly Guide - Easy Installation Steps

Thank You for Your Purchase

Thank you for your purchase. If you have difficulty with assembly or need replacement parts, Vingli Customer Service is here to assist you.

Email: support@vingli.com

Website: www.vingli.com

Please attach your User name or Order ID so that Vingli can assist you better.

WARNING: Furniture Tipover Prevention

Children have died from furniture tipover. To reduce the risk of furniture tipover:

ALWAYS install tipover restraint provided.
NEVER put a TV on this product.
NEVER allow children to stand, climb or hang on drawers, doors, or shelves.
NEVER open more than one drawer at a time.
Place heaviest items in the lowest drawers.
Do not defeat or remove the drawer interlock system.

This is a permanent label. Do not remove!

Parts List

Furniture Components

Part	Quantity	Description
A	x1	Top panel (flat rectangular board)
B	x1	Bottom panel (flat rectangular board with holes)
C	x1	Left side panel (tall panel with multiple shelf holes)
D	x1	Right side panel (tall panel with multiple shelf holes)
E	x4	Drawer front panel (decorative panel with vertical slats)
F	x8	Drawer side panel (flat rectangular board)
G	x4	Drawer back panel (flat rectangular board)
H	x4	Drawer bottom panel (thin flat rectangular board)
I	x2	Back support bar (long, thin rectangular bar)
J	x1	Top support bar (long, thin rectangular bar with holes)
K	x1	Back panel (tall, thin rectangular board)

Hardware Components

Part No.	Quantity	Description
①	x14	Cam lock screws
②	x10	Dowel pins
③	x10	Cam locks
④	x18	Shelf pins / Drawer slides
⑤	x32	Wood screws (pointed)
⑥	x1	Long screw (for anti-tip bracket)
⑦	x1	Short screw (for anti-tip bracket)
⑧	x1	Washer
⑨	x1	Anti-tip strap
⑩	x1	Wall anchor

Assembly Instructions

1. Assemble the Main Frame Base

Attach dowel pins (②) and cam lock screws (①) to the designated holes on side panels (C) and (D).
Insert cam locks (③) into panel (B).
Connect panel (B) to side panels (C) and (D) using shelf pins (④) and cam locks (③). Ensure the cam locks are tightened to secure the connection.
Attach the two back support bars (I) horizontally between side panels (C) and (D) using shelf pins (④).

Diagram shows panels C and D upright, with panel B inserted horizontally between them. Shelf pins (4) are inserted into holes on C and D to support B. Dowel pins (2) and cam lock screws (1) are used to secure B to C and D. Support bars (I) are attached horizontally.

2. Prepare the Top Panel

Attach dowel pins (②) and cam lock screws (①) to the underside of the top panel (A).

Diagram shows panel A with dowel pins (2) and cam lock screws (1) being inserted into its underside.

3. Attach the Top Panel

Place the prepared top panel (A) onto the top of the assembled main frame (C and D).
Secure panel (A) to the side panels (C) and (D) using cam locks (③) and shelf pins (④). Ensure all connections are tight.

Diagram shows panel A being placed on top of the structure from Step 1. Cam locks (3) and shelf pins (4) secure it.

4. Assemble the Drawer Box

Take one drawer back panel (G), two drawer side panels (F), and one drawer bottom panel (H).
Connect panels (F), (G), and (H) to form the basic drawer box structure.
Secure these panels together using wood screws (⑤).

Diagram shows the assembly of a drawer box. Panels F, G, and H are joined to form the basic drawer structure, secured by screws (5).

5. Attach Drawer Fronts

Take one drawer front panel (E).
Attach the drawer front panel (E) to the assembled drawer box from Step 4 using wood screws (⑤).
Repeat Steps 4 and 5 for all four drawers.

Diagram shows the decorative drawer front panel (E) being attached to the drawer box from Step 4, using screws (5).

6. Insert Drawers into Cabinet

Carefully slide each of the four assembled drawers into their respective slots within the cabinet structure.

Diagram shows the four assembled drawers sliding into the cabinet. Arrows indicate the direction of insertion.

7. Attach the Back Panel

Position the back panel (K) against the rear of the cabinet.
Secure the back panel (K) to the cabinet frame using wood screws (①).

Diagram shows the back panel (K) being screwed onto the back of the cabinet using screws (1).

8. Install Anti-Tip Restraint

Attach one end of the anti-tip strap (⑨) to the top back of the cabinet (panel C) using a short screw (⑦) and washer (⑧).
Position the cabinet against the wall in its desired location.
Mark the wall where the other end of the strap aligns.
Drill a pilot hole in the wall at the marked spot. Insert the wall anchor (⑩) into the pilot hole.
Secure the other end of the anti-tip strap (⑨) to the wall using the long screw (⑥) into the wall anchor (⑩).

Diagram shows the anti-tip strap (9) attached to the top rear of the cabinet (C) with screw (7) and washer (8). The other end is attached to a wall with screw (6) and wall anchor (10).

	VINGLI 5-Drawer Storage Cabinet Assembly Instructions and Warranty Comprehensive assembly instructions, component identification, and warranty information for the VINGLI 5-Drawer Storage Cabinet. Includes safety warnings and FAQs.
	VINGLI File Cabinet Assembly Instructions and User Guide Detailed assembly instructions, parts list, hardware guide, and safety information for the VINGLI File Cabinet. Learn how to assemble and use your VINGLI file cabinet effectively.
	VINGLI Podium File Cabinet Assembly Instructions & User Guide Detailed assembly instructions and frequently asked questions for the VINGLI Podium File Cabinet, a versatile storage unit. This guide includes a comprehensive parts list, step-by-step assembly procedures, and troubleshooting tips to ensure proper setup and functionality of your VINGLI office furniture.
	VINGLI File Cabinet Assembly Instructions (Models FC0WRLO, FC0W2LB, FC0W2LW) This document provides comprehensive assembly instructions for the VINGLI 2-Drawer Lateral File Cabinet, including a detailed parts list, step-by-step assembly guidance, and important safety information for models FC0WRLO, FC0W2LB, and FC0W2LW. Learn how to assemble your new file cabinet efficiently and safely.
	Vingli 3 Drawer File Cabinet Assembly Instructions Detailed assembly instructions for the Vingli 3 Drawer File Cabinet, including a parts list, hardware, and step-by-step guidance for assembly. Learn how to properly assemble your Vingli mobile file cabinet.
	VINGLI Drawer Dresser Assembly Instructions Comprehensive assembly instructions for the VINGLI Drawer Dresser, including parts identification, step-by-step guidance, safety warnings, and warranty information. Learn how to assemble your VINGLI furniture safely and correctly.
	VINGLI Rattan Dresser Assembly Instruction and Safety Guide Detailed assembly instructions and essential safety information for the VINGLI Rattan Dresser. This guide includes a comprehensive parts list, step-by-step assembly procedures, and critical warnings regarding furniture tip-over prevention to ensure safe and proper setup for home use.
	VINGLI Kitchen Island Cart Assembly Manual Detailed assembly instructions for the VINGLI Kitchen Island Cart, including a complete list of components and hardware, and step-by-step diagrams for easy setup.