KNIVSHULT Drawer Runner Assembly Instructions

Step 1: Prepare the Connecting Rod

The connecting rod (Part No. 10050915) needs to be cut to specific lengths based on the drawer width:

• For 40 cm drawers: Cut to 125 mm.
• For 60 cm drawers: Cut to 325 mm.
• (Note: The length for 80 cm drawers is not explicitly shown but follows the pattern).

Visual Description: Diagrams show measuring the rod with a tape measure and marking it with a pencil, followed by cutting with a saw. A cut piece is shown being discarded into a waste bin ?️.

Step 2: Attach Rod Connectors

Attach two rod connectors (Part No. 10050910) to each end of the prepared connecting rod.

Visual Description: A diagram illustrates attaching the connectors to the rod ends. A magnified view shows the connector being inserted and secured, possibly with a twisting motion [twist-symbol].

Step 3: Mount Drawer Slides to Drawer Box

Attach the main drawer slides (Part No. 10050976 for left, 10051031 for right) to the sides of the drawer box.

Visual Description: Diagrams show the left and right drawer slides being aligned and attached to the drawer box. Arrows indicate the direction of attachment. A close-up shows a hand operating a mechanism to engage or disengage the slide, often accompanied by a "Click!" indicator.

Step 4: Attach Brackets to Drawer Slides

Attach the smaller brackets (Part No. 10050905 for left, 10050926 for right) to the front of the drawer slides.

Visual Description: Diagrams show the brackets being slid into place on the drawer slides. Arrows indicate the correct orientation and method of attachment. A curved arrow shows the bracket being moved into its final locked position.

Step 5: Install Drawer into Cabinet

Insert the assembled drawer into the cabinet, aligning the drawer slides with the corresponding runners inside the cabinet.

Visual Description: A diagram shows the drawer being slid into the cabinet. Close-up diagrams illustrate how to align and engage the drawer slides with the cabinet runners. An information icon ℹ️ is present, indicating important notes.

Step 6: Secure Drawer Slides to Cabinet

Detailed instructions for attaching the cabinet-side runners and ensuring the drawer slides engage correctly.

Visual Description: Diagrams show the process of attaching the cabinet runners and then sliding the drawer in. A hand is shown operating a lever or mechanism to lock the slide into place, often indicated by a "Click!" sound.

Step 7: Final Drawer Engagement

This step focuses on the final locking mechanism of the drawer into the cabinet runners.

Visual Description: Diagrams show the drawer slides engaging with the cabinet runners. A U-shaped component is shown being attached or detached (2x indicated). A crossed-out U-shape ❌ indicates an incorrect method. The final engagement is confirmed with a "Click!" sound.

Step 8: Attach Small Covers

Attach the small caps/covers (Part No. 107091) to the designated points on the drawer or cabinet.

Visual Description: A diagram shows four small caps being pushed into place, with an arrow indicating insertion. A piece is shown being discarded into a waste bin ?️.

Cleaning Instructions

To clean your KNIVSHULT drawer runners, wipe with a soft cloth dampened in water and a mild non-abrasive washing-up detergent or soap, if necessary.

Visual Description: An information icon ℹ️ is shown, followed by cleaning instructions presented in multiple languages.