Beghelli MICRODOT TR
Emergency Lighting Fixture
Product Overview and Dimensions
Beghelli S.p.A. manufactures the MICRODOT TR, a safety lighting fixture. The unit measures 37mm in height, 30mm in width, and 197mm in length.
Mounting Requirements
It requires a mounting hole diameter between 30mm and 40mm. An adapter is available for installations requiring a 40mm diameter.
Environmental and Protection Ratings
The fixture has an impact resistance rating of IK07. It is rated IP20 for indoor use and IP65 for protection against dust and water jets.
Optic Modification
The light distribution pattern can be adjusted. Users can select between a 'WIDE' beam for broader illumination or a 'LONG' beam for focused light. A 'DEFAULT' setting is also available.
Connections and Settings
Wiring
The unit connects to a 230Vac power supply. Terminals include L (Live), N (Neutral), and D-/D+ for dimming control. The maximum cable diameter is 8mm, and the maximum wire cross-section is 1.5mm². Basic insulation is required.
Jumper Configuration
The device can be configured using jumpers for specific operating modes:
- SE/SA Settings: 1 hour, 1.5 hours, 2 hours, 3 hours
- Autonomy Settings: 1 hour, 1.5 hours, 2 hours, 3 hours
A 'DEFAULT' jumper position is also provided.
Installation with Adapter
The diagram illustrates installation for a 40mm diameter hole using the provided adapter.
Technical Specifications
Parameter | Value |
---|---|
Power Supply | 230V, 50Hz |
Current Consumption | 39mA |
Power Factor (cos φ) | 0.41 |
Light Source | 1 LED |
Battery Type | LiFe 3.2V 1.5Ah |
Emergency Duration | 1h, 1.5h, 2h, 3h |
Operation and Safety Information
LED Indicators
- FIXED GREEN: Battery is charging.
- FIXED RED: Battery is disconnected.
Rest Mode
To set the device into rest-mode, consult the instructions for the Inibit remote controller (Order code 2730).
Warnings and Guarantee
- This device must be used only for its intended purpose. Any other use is considered improper and dangerous.
- The rechargeable battery and LED source are non-replaceable.
- For any repairs, contact an authorized technical service center and ensure original spare parts are used. Failure to comply with these conditions may compromise the safety of the device.
Disposal
Electrical equipment should be disposed of according to local regulations. [Recycling symbol]