Product Overview
The Beghelli Completa LED TR is an emergency LED luminaire designed for reliable safety lighting. It is available in configurations with different IP ratings, including IP40, IP42, and IP66, making it suitable for various installation environments.
Key models include: 4266, 4265, 4278, 4112, and the 4100 series (4101N, 4102N, 4103N, 4105N, 4108N, 4110N).
Certifications: CE, CSQ, IQNet, UNI EN ISO 14001.
Manufacturer: BEGHELLI S.p.A. - Via Mozzeghine 13/15 - località Monteveglio 40053 Valsamoggia (BO) ITALY.
Installation and Wiring
The luminaire requires proper installation to ensure safe and effective operation.
Mounting and Connections
Diagram A1, A2, A3: Illustrates different IP ratings (IP40, IP42, IP66) for the Completa LED TR luminaire, indicating suitability for various environments.
Diagram C: Shows wiring terminals labeled L+ (Live), N- (Neutral), L2, and N2. It also provides key dimensions: 12mm, 126mm, 294mm, 35mm.
Diagram D: Depicts the steps for mounting the luminaire base to a wall or surface. ➡️ [Mounting Base]
Diagram E: Illustrates how to attach the luminaire's cover or diffuser to the base. ➡️ [Attach Cover]
Diagram F & F1: Provide internal views of the luminaire, showing the battery connector (??) and circuit board components.
Diagram G & SE: These are wiring diagrams for SA and SE configurations, detailing connections to mains power (230Vac). They include terminals for A (Test ?) and C (Light switch ?).
Wiring Terminal Identification:
- SA: N2, L2, N-, L+
- SE: N2, L2, N-, L+
Power Connection: 230Vac
Technical Specifications
| Model | Voltage | Frequency | Current | Power Factor (COS ϕ) | LEDs | Battery Type | Battery Capacity | Autonomy |
|---|---|---|---|---|---|---|---|---|
| 4101N | 230V | 50Hz | 107mA | 0.05C | 24 LED | LiFe 3.2V | 0.5Ah | 1-3h |
| 4102N | 230V | 50Hz | 107mA | 0.05C | 24 LED | LiFe 3.2V | 0.5Ah | 1-3h |
| 4103N | 230V | 50Hz | 107mA | 0.05C | 24 LED | LiFe 3.2V | 1.5Ah | 1-3h |
| 4105N | 230V | 50Hz | 107mA | 0.1 | 24 LED | LiFe 3.2V | 1.5Ah | 1-3h |
| 4108N | 230V | 50Hz | 107mA | 0.05C | 24 LED (2x) | LiFe 3.2V | 1.5Ah | 1-3h |
| 4110N | 230V | 50Hz | 107mA | 0.1 | 24 LED (2x) | LiFe 3.2V | 1.5Ah | 1-3h |
Autonomy:
- 1 hour (wire intact)
- 3 hours (wire cut)
Operation and Indicators
Rest Mode
The appliance can be put into "rest mode" using the accessory cod. 15048 and the Inibit remote control (code 2730).
LED Signals
- FIXED GREEN: Battery is charging (?Charging).
- FIXED RED: Battery is disconnected (? Disconnected).
Warnings and Guarantee
WARNINGS - GUARANTEE
- This device shall be used exclusively for the purpose for which it has been designed. Any other use is considered improper and therefore dangerous.
- The rechargeable battery and LED source are non-replaceable types. For any repairs, contact an authorized technical service center and request the use of original spare parts.
- Failure to respect the above conditions may compromise the safety of the device.
⚠️ Caution: Electric shock ⚡
