Fortin EVO-ONE Installation Guide

For Honda Civic (2016-2021)

Regular Installation

This guide provides instructions for the regular installation of the Fortin EVO-ONE system in Honda Civic vehicles (2016-2021). It includes suggested wiring configurations and addenda.

Vehicle Functions Supported: Immobilizer bypass, T-Harness available, Lock, Unlock, Arm, Disarm, Trunk (open), Tachometer, Parking Lights, Door Status, Trunk Status, Hood Status, Hand-Brake Status, Foot-Brake Status, R.S. OEM remote, Stand Alone compatible, OEM Remote Monitoring.

Bypass Firmware Version: 73.[38] (HONDA/ACURA MINIMUM)

To add the firmware version and options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool (sold separately).

Programming Options:

Program bypass option: C1 (OEM Remote status monitoring), A11 (Hood trigger/Output Status).
Program bypass option (if equipped with OEM alarm): D2 (Unlock before/Lock after - Disarm OEM alarm).
Program remote starter option for R.S. OEM Remote Stand Alone: Function 38, Mode 2 (Enable: Press 3x Lock to remote start with the OEM remote).

Mandatory Installation:

Hood Pin: The hood pin switch (included) must be installed if the vehicle can be remote started with the hood open. If not, set Function A11 to OFF.
Security Sticker: The included security sticker must be installed.

Warning: This module must be installed by a qualified technician. Incorrect connections can cause permanent damage to the vehicle.

Wiring Diagrams and Connections

Detailed diagrams illustrate the connections for various components:

Ignition Harness: Connections for (+ )IGNITION, (+ )12V, (+ )STARTER, (+ )ACCESSORY.
Parking Lights Harness: Connection for (- )PARKING LIGHTS.
Steering Column: Connections for (- )HORN and other wires.
Clutch Connector: Connection for (- )CLUTCH (Manual Transmission).
Ignition Key Barrel: Connections for IMMO, IGNITION, CAN LOW, CAN HIGH, DATA.
Immobilizer Connector: Connections for IMMO, IGNITION, CAN LOW, CAN HIGH, DATA.

Specific wire colors and connections are provided for Honda Civic models (2016-2017 and 2018-2020) for various points including the parking light switch, steering column, ignition harness, clutch switch, and immobilizer connector.

Automatic Transmission Wiring Connection: A specific diagram is provided for automatic transmission vehicles, including instructions to cut a loop for the automatic transmission mode.

Manual Transmission Wiring Connection: A specific diagram is provided for manual transmission vehicles, including the clutch connector.

DCryptor Programming Procedure

Parts Required (not included): FLASH LINK UPDATER, FLASH LINK MOBILE, FLASH LINK MANAGER software, or FLASH LINK MOBILE APP for smartphone (Android/iOS).

Steps:

Press and hold the programming button. Connect the 6-PIN Main harness. Observe LED illumination (Blue, Red, Yellow, Blue & Red).
Release the programming button when the Blue & Red LEDs are ON. If not, disconnect and restart from step 1.
Connect the remaining harnesses.
Press and release the programming button three times (3x). Observe Red and Blue LEDs alternating between 2 flashes and a pause.
Turn the key to the Ignition ON/RUN position. Wait for the Yellow LED to flash rapidly.
Wait for the Blue LED to flash rapidly.
Turn the key to the OFF position. Observe Red and Yellow LEDs flashing alternatively.
Disconnect all connectors and the 6-Pin (Main-Harness) or 4-Pin Data-link connector.
Use the FLASH LINK UPDATER or FLASH LINK MOBILE tool to visit the DCryptor menu.
After DCryptor programming is complete, reconnect the 6-Pin (Main-Harness) or 4-pins (Data-Link) connector and all other remaining connectors.

Remote Starter / Alarm Verification Procedure

Test the remote starter. Remote start the vehicle.

Remote Starter Functionality

To start the vehicle:

Ensure all doors are closed.
Remote start the vehicle.
Unlock the doors with the remote-starter remote or the OEM remote.
Insert and turn the key to the Ignition ON/RUN position.
Press the brake pedal.
The vehicle is now ready to be driven.

Notices and Warnings

Updated Firmware and Installation Guides: Fortin recommends updating the module to the latest firmware and downloading the latest installation guides from their website (www.fortin.ca) regularly.

Warning: The information provided is a guide only and is subject to change without notice. Fortin Electronic Systems assumes no liability or responsibility for the accuracy or currency of the information, or for any installation performed. Installation is the sole responsibility of the installer. The module must be installed by a qualified technician.

Tech Support: 514-255-HELP (4357) or 1-877-336-7797.

Website: www.fortinbypass.com

	Fortin EVO-ONE Remote Starter and Bypass Module Installation Guide for Honda Civic (2016-2020) Comprehensive installation and programming guide for the Fortin EVO-ONE remote starter and immobilizer bypass module, specifically for Honda Civic models (2016-2020) with Push-to-Start. Includes wiring diagrams, programming procedures, and essential notes.
	Fortin EVO ONE Remote Starter Installation Guide for Chevrolet Spark Comprehensive installation and programming guide for the Fortin EVO ONE remote starter and alarm system for Chevrolet Spark vehicles (2016-2019). Includes wiring diagrams, programming procedures, and remote start functionality.
	Fortin EVO-ALL Installation Guide for Toyota Hilux (2015-2020) Push-to-Start Comprehensive installation guide for the Fortin EVO-ALL remote starter and bypass module for Toyota Hilux vehicles equipped with push-to-start systems (2015-2020). Covers wiring, programming, and functionality.
	Fortin EVO-ONE Installation and Programming Guide for Nissan Rogue (2014-2020) Push-to-Start Comprehensive guide for installing and programming the Fortin EVO-ONE remote starter and bypass module for Nissan Rogue vehicles (2014-2020) with push-to-start ignition. Includes wiring diagrams, programming procedures, and functionality details.
	Fortin EVO-ALL Installation Guide for Mazda CX-5 (2017-2020) Push-to-Start Comprehensive installation guide for the Fortin EVO-ALL bypass and interface module for Mazda CX-5 models with Push-to-Start (2017-2020). Includes wiring diagrams, programming procedures, and remote starter functionality.
	Fortin EVO-ONE THAR-ONE-TOY5 Harness Installation Guide for Toyota Tacoma Detailed installation and programming guide for the Fortin EVO-ONE and THAR-ONE-TOY5 harness for Toyota Tacoma (2016-2023) H-Key vehicles. Covers wiring, key bypass, and remote starter functions.
	Fortin EVO-KEY Installation Guide for Kia Niro (2017-2021) Hybrid Push-to-Start Comprehensive installation and programming guide for the Fortin EVO-KEY interface module in a Kia Niro (2017-2021) Hybrid Push-to-Start vehicle. Includes wiring diagrams and step-by-step instructions.
	Fortin EVO-ONE Installation Guide for Honda Civic (2022) Push-to-Start Comprehensive installation guide for the Fortin EVO-ONE remote starter, alarm, and immobilizer bypass module for the 2022 Honda Civic with Push-to-Start. Includes wiring diagrams, programming procedures, and functionality details.