MOSSJÖN Glass Door Cabinet Assembly

Safety Information

⚠️ WARNING

Children have died from furniture tipover. To reduce the risk of furniture tipover:

• Always install the anti-tip device provided. [checkmark-symbol]
• Never put a TV on this product. [no-tv-symbol]
• Never allow children to stand, climb, or hang on any drawers, doors, or shelves. [no-climbing-symbol]
• Never open more than one drawer at a time.
• Place heaviest items in the lowest drawers.

Parts Included

Assembly Steps

Step 1

Assemble the base frame. Two side pieces are connected to two crossbars. The diagram shows two people assembling the frame on a surface with a mat.

Step 2

Attach the vertical support posts to the base frame. The diagram shows four vertical posts being inserted into corner brackets on the base frame.

Step 3

Attach the top frame to the vertical posts. Use four screws (10075024) to secure the top frame to the four vertical posts.

Step 4

Add horizontal supports between the vertical posts. The diagram shows two horizontal bars being placed and attached to the frame.

Step 5

Secure the frame further. Insert two screws (10082207) into the designated holes on the frame.

Step 6

Continue securing the frame. Insert two screws (10075024) into the frame.

Step 7

Attach the side frame elements. The diagram shows two side frame pieces being attached to the main structure, possibly using screws not explicitly numbered in this step's diagram.

Step 8

Slide the back panel into place. The diagram shows a grey panel being inserted into the rear of the cabinet frame.

Step 9

Secure the back panel. Use four screws (144451) to fasten the back panel to the frame.

Step 10

Further secure the frame. Use four screws (144451) to attach components to the frame.

Step 11

Place the shelves. Insert two shelves (1x each) onto the support pins inside the cabinet frame. The diagram shows a hand placing a shelf.

Step 12

Install the doors. Slide the two ribbed doors into the vertical grooves on the front of the cabinet frame from the sides. The diagram shows arrows indicating the sliding motion.

Step 13

Attach door hinges. Use four screws (144451) to attach hinges to the cabinet frame on one side, and three screws (144451) on the other side. The diagram shows close-ups of hinge attachment.

Step 14

Attach door handles. Use four screws (10004350) to attach the handles to the doors. The diagram shows screws being inserted from the inside of the door.

Step 15

Install door runners/guides. Attach runners to the cabinet frame using screws (10103731) and the Allen key (10108237). The diagram shows two different runner attachments.

Step 16

Attach door hinges. Use two screws (107832) to attach hinges to the doors.

Step 17

Attach door hinges. Use two screws (102319) to attach hinges to the doors.

Step 18

Final hinge attachment. Use two bolts (10089605) and two screws (10103598) to attach hinges to the cabinet, using the Allen key (10108237). The diagram shows a close-up of this connection.

Step 19

Attach the top panel. The diagram shows a panel being placed on top of the cabinet structure.

Step 20

Secure the doors. Use two screws (144451) for each door to attach them to the hinges. The diagram shows close-ups of screw insertion.

Step 21

Insert doors into frame. The diagram shows a hand pushing a door into its final position within the cabinet frame.

Step 22

Secure doors to frame. Use eight screws (144451) to fasten the doors to the cabinet frame.

Step 23

Wall mounting preparation. The diagram shows the cabinet positioned near a wall, with a warning symbol indicating the need for wall anchoring.

Step 24

Wall mounting. The diagram shows screws being used to attach the cabinet to the wall.

Step 25

Install anti-tip strap to wall. Secure the anti-tip strap (107967) to the wall using screws (100823) and appropriate wall anchors (not explicitly listed but implied). Ensure the strap is attached approximately 7.6cm (3 inches) from the top edge of the cabinet and 2.5cm (1 inch) from the side edge of the wall.

Step 26

Attach anti-tip strap to cabinet. Secure the other end of the anti-tip strap to the cabinet using a screw. The diagram shows a hand securing the strap to the top of the cabinet.

Step 27

Attach door hinges. Use screws (144451) to attach hinges to the doors.

Step 28

Attach door hinges. Use eight screws (10103727) and the Allen key (10089605) to attach hinges to the doors. Note: The parts list indicates 4x for 10103727, but the diagram shows 8x usage.

Step 29

Attach top panel. Use screws (10103654) to secure the top panel to the cabinet frame. The diagram shows the Allen key being used.

Step 30

Adjust feet. The diagram shows the adjustable feet at the bottom of the cabinet being turned to level the unit. [adjustable-foot-symbol]