RUDSTA Glass-Door Cabinet

Important Safety Information

WARNING!

Serious or fatal crushing injuries can occur from furniture tip over. To prevent tip over, this furniture must be used with the wall attachment device(s) provided.

Screw(s) and plug(s) for the wall are not included. Use screw(s) and plug(s) suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.

This warning is translated into multiple languages including German (ACHTUNG!), French (ATTENTION!), Dutch (WAARSCHUWING!), Danish (ADVARSEL!), Icelandic (VARÚÐ!), Norwegian (ADVARSEL!), Finnish (VAROITUS!), Swedish (VARNING!), Czech (UPOZORNĚNÍ!), Spanish (¡ADVERTENCIA!), Italian (AVVERTENZA!), Polish (OSTRZEŻENIE!), Estonian (HOIATUS!), Lithuanian (ĮSPĖJIMAS!), Portuguese (AVISO!), Romanian (AVERTISMENT!), Slovak (UPOZORNENIE!), Bulgarian (ВНИМАНИЕ!), Croatian (UPOZORENJE!), Greek (ΠΡΟΕΙΔΟΠΟΙΗΣΗ!), Russian (ВНИМАНИЕ!), Ukrainian (УВАГА!), Serbian (UPOZORENJE!), Slovenian (OPOZORILO!), Turkish (UYARI!), Chinese (警告!), Korean (주의!), Japanese (警告!), Malay (AMARAN!), Indonesian (PERINGATAN!), Arabic (تحذير!), Thai (คำเตือน!), and Vietnamese (CẢNH BÁO!).

Assembly Instructions

The assembly of the RUDSTA glass-door cabinet involves several steps, illustrated with diagrams. The following is a textual description of the assembly process:

Step 1: Frame Assembly

Attach the side support bars to the base frame using screws. Ensure the correct orientation as indicated by the arrows.

Step 2: Attaching Vertical Supports

Connect the vertical support pieces to the base frame, again using screws and ensuring correct alignment.

Step 3: Inserting Back Panel

Slide the back panel into the grooves on the frame. Secure it in place using screws.

Step 4: Inserting Second Back Panel

Slide the second back panel into place and secure it.

Step 5: Attaching Shelf Supports

Attach the shelf support brackets to the inside of the cabinet frame using screws.

Step 6: Securing Base

Attach the base feet to the bottom of the cabinet frame using screws.

Step 7: Attaching Top Panel

Place the top panel onto the assembled frame and secure it with screws.

Step 8: Attaching Bottom Shelf Supports

Attach the supports for the bottom shelf to the lower part of the cabinet frame.

Step 9: Inserting Side Panels

Carefully insert the glass side panels into the frame, ensuring they are correctly positioned and secured.

Step 10: Attaching Top Support

Attach the top support bar to the cabinet.

Step 11: Attaching Top Glass Panel

Insert the top glass panel into the frame and secure it.

Step 12: Attaching Top Frame

Attach the top frame piece to the cabinet.

Step 13: Securing Glass Panels

Secure the glass panels to the frame using screws.

Step 14: Attaching Door

Attach the door to the cabinet frame using the provided hinges and screws.

Step 15: Attaching Door Handle

Attach the door handle to the door.

Step 16: Finalizing Door Attachment

Complete the door attachment by securing the hinges.

Step 17: Adjusting Feet

Adjust the feet of the cabinet to ensure it is level on the floor.

Step 18: Attaching Magnetic Catches

Install the magnetic catches for the door.

Step 19: Attaching Shelf Pins

Insert the shelf pins into the desired positions inside the cabinet.

Step 20: Placing Shelves

Place the shelves onto the shelf pins.

Wall Anchoring (Crucial Safety Step)

The product must be securely fixed to the wall using the provided wall attachment devices to prevent tipping. Ensure you use screws and plugs suitable for your wall type. If unsure, consult a professional.