IKEA MOSSJÖN Wall Cabinet
Important Safety Information
WARNING! Serious or fatal crushing injuries can occur from furniture falling down. To prevent this furniture from falling down, it must be used with the wall attachment device(s) provided.
Screw(s) and plug(s) for the wall are not included. Assess the suitability of the wall to ensure that it will withstand the forces generated. Use screw(s) and plug(s) suitable for your walls and the intended load. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.
Parts List
The following parts and hardware are included:
- 1x Allen Key (10089605)
- 1x Allen Key (100092)
- 4x Screws (10004350)
- 4x Screws (10082207)
- 18x Screws (10075024)
- 2x Screws (10103596)
- 2x Screws (10108237)
- 1x Pin/Dowel (107832)
- 1x Pin/Dowel (102319)
- 2x Corner Brackets (10049771)
- 2x Corner Brackets (10049775)
- 12x Cam Lock Screws (10103727)
- 2x Cam Locks (10103731)
- 2x Hinges (10049776)
- 2x Hinges (10049777)
- 2x Door Handles (144451)
- 2x Shelf Supports (10104220)
- 2x Shelf Supports (10103847)
- Slatted Door Panels (2x)
- Cabinet Frame Components (Base, Top, Sides, Back)
Assembly Steps
Follow these steps carefully to assemble your MOSSJÖN wall cabinet.
Step 1
Attach two hinges (10049776, 10049777) to the base frame components using screws (10049775).
Step 2
Insert vertical support posts into the base frame. Ensure correct orientation; one method is shown as correct, the other as incorrect.
Step 3
Attach the top frame components to the vertical posts using cam lock screws (10103727) and cam locks (10103731), tightened with Allen key (100092).
Step 4
Insert and secure the remaining vertical support posts into the base frame.
Step 5
Secure the frame further using screws (10075024), tightened with Allen key (10089605).
Step 6
Attach the side frame pieces to the main structure.
Step 7
Attach back support pieces using screws (10082207) and cam lock screws (10103727) and cam locks (10103731).
Step 8
Secure the structure with screws (10075024).
Step 9
Attach the door frame elements to the main cabinet structure using screws (144451) and shelf supports (10104220).
Step 10
Prepare a shelf by inserting pins/dowels (107832).
Step 11
Insert the prepared shelf into the cabinet.
Step 12
Slide the slatted door panels into the cabinet frame.
Step 13
Secure the door panels using screws (144451).
Step 14
Attach a shelf support bracket (10103731) to a shelf using screws (10004350, 10108237).
Step 15
Attach the shelf support bracket to the cabinet frame.
Step 16
Attach the remaining shelf support brackets (10103731) to shelves and cabinet.
Step 17
Attach the door hinges (10049776, 10049777) to the door and cabinet frame using screws (10103598).
Step 18
Attach the door handle (144451) to the door.
Step 19
Slide the door into place and secure it.
Step 20
Attach the back panel using screws (144451).
Step 21
Secure the top of the cabinet with screws (144451).
Step 22
Attach the door hinges to the cabinet frame.
Step 23
Adjust the door hinges.
Step 24
Attach corner brackets (10049775) for stability.
Step 25
Attach the final corner brackets (10049771).
Step 26
Secure the cabinet to the wall. Use the provided wall attachment hardware (cam lock screws 10103727 and cam locks 10103731). Note: Screws and plugs for the wall itself are not included and must be selected based on your wall type.
Step 27
Insert shelves (10103847) into the cabinet.