MOSSJÖN Glass-Door Cabinet
Assembly Instructions
Important Safety Information
⚠️ WARNING: Children have died from furniture tipover. To reduce the risk of furniture tipover:
- ALWAYS install the anti-tip device provided.
- NEVER put a TV on this product.
- NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves.
- NEVER open more than one drawer at a time.
- Place heaviest items in the lowest drawers.
Parts List
Ensure all parts are present before assembly:
- Bolts: 10089605 (2x), 100092 (2x), 107832 (2x)
- Screws: 100823 (6x), 107967 (28x), 102319 (4x), 10103598 (4x), 144451 (4x), 10075024 (6x), 10004350 (4x), 10103727 (8x)
- Washers: 102319 (2x), 10004350 (4x), Generic Washer (1x)
- Dowels: 10103731 (8x)
- Feet: 10103727 (4x)
- Brackets: 10103596 (2x)
- Shelves: 10099819 (2x)
- Back Panel: 10108237 (1x)
- Anti-tip strap: 107967 (1x)
- Allen Keys: 2x
Assembly Steps
Step 1: Assemble Base Frame
Connect the two side frame pieces with crossbars using 2x bolts (107832). Attach two vertical supports to one side frame.
Step 2: Attach Remaining Supports
Attach the other two vertical supports to the opposite side frame using 2x bolts (107832).
Step 3: Attach Lower Shelf Supports
Secure the lower shelf support brackets to the vertical poles using 4x screws (10075024).
Step 4: Install Lower Horizontal Supports
Connect the lower horizontal supports between the vertical poles.
Step 5: Install Middle Horizontal Supports
Attach the middle horizontal supports between the vertical poles using 2x bolts (100092).
Step 6: Install Upper Horizontal Supports
Secure the upper horizontal supports between the vertical poles using 2x screws (10075024).
Step 7: Attach Feet
Screw the 4x feet (10103727) into the bottom of the frame.
Step 8: Insert Back Panels
Slide the 2x back panels (10108237) into the grooves on the frame.
Step 9: Secure Back Panels
Fasten the back panels to the frame using 4x screws (144451).
Step 10: Attach Upper Frame
Secure the upper frame structure using 4x screws (144451).
Step 11: Place First Shelf
Insert the first shelf (10099819) into the designated slots.
Step 12: Prepare for Doors
The cabinet frame is now ready for door installation.
Step 13: Attach Door Hinges to Frame and Doors
Attach hinges to the frame using 4x screws (144451) and to the doors using 3x screws (144451).
Step 14: Attach Door Handles
Fix the door handles to the doors using 4x screws (10004350). Note: Part 10004350 is listed as a washer in the parts list, but shown as a screw here.
Step 15: Install Door Runners and Brackets
Attach the door runners and brackets using 2x dowels (10103731), 2x brackets (10103596), and 2x runners (10108237).
Step 16: Attach Hinges to Frame
Attach the hinges to the main cabinet frame using 2x bolts (107832) and 2x screws (102319).
Step 17: Mount Doors to Frame
Connect the doors to the frame by attaching the hinges using 2x bolts (107832).
Step 18: Secure Doors
Secure the doors in place using 2x bolts (10089605).
Step 19: Place Top Panel
Position the top panel onto the cabinet structure.
Step 20: Secure Top Panel
Fasten the top panel to the frame using 4x screws (144451).
Step 21: Insert Doors
Slide the doors into their final position.
Step 22: Attach Door Hinges to Frame
Secure the door hinges to the cabinet frame using 8x screws (144451). Note: The parts list indicates fewer of this screw type are included.
Step 23: Mark Wall for Anti-Tip Device
Mark the wall where the anti-tip device will be attached, ensuring it aligns with the furniture.
Step 24: Drill Wall Holes
Drill holes in the wall at the marked locations, suitable for the wall anchors (not included).
Step 25: Attach Strap to Wall
Secure one end of the anti-tip strap (107967) to the wall using 1x screw (100823) and a suitable wall anchor.
Step 26: Attach Strap to Furniture
Fasten the other end of the anti-tip strap (107967) to the furniture.
Step 27: Final Hinge Adjustment
Make any final adjustments to the door hinges using 1x screw (144451).
Step 28: Attach Door Handles
Attach the door handles using 8x screws (10103727). Note: Part 10103727 is listed as feet in the parts list, but shown as screws here.
Step 29: Insert Shelves
Place the remaining 2x shelves (10103654) into the cabinet at the desired heights.
Step 30: Level the Cabinet
Adjust the feet on the bottom of the cabinet to ensure it is level and stable.
Care and Maintenance
Wipe clean with a damp cloth. Wipe dry with a clean cloth. Check regularly that all assembly fastenings are properly tightened and retighten as necessary.
