Bertazzoni DW24S3IPV Dishwasher Installation Specifications

Product Dimensions

Side View: The dishwasher has an adjustable height ranging from 32 1/4 inches (820 mm) to 34 1/4 inches (870 mm), with an additional 2 inches (50 mm) for feet adjustment. The width is 21 5/8 inches (550 mm). The overall depth is 45 2/3 inches (1160 mm), which includes a 3/4 inch (20 mm) thick custom panel.

Front View: The visible width is 23 9/16 inches (598 mm), and the height is 25 1/2 inches (647 mm).

Top View: The width is 23 9/16 inches (598 mm), and the depth is 21 5/8 inches (550 mm). This view indicates the locations for WATER DRAIN, WATER INLET, and POWER connections. It also specifies a minimum cabinet depth requirement of 3 1/8 inches (80 mm) to a maximum of 5 1/8 inches (130 mm) for the drain hose and toe kick area, which are provided with the unit.

Cutout Dimensions

Side View: The required height for the cutout ranges from 32 1/2 inches (824 mm) to 34 3/8 inches (874 mm).

Front View: The cutout width can be 24 inches (610 mm) or 23 5/8 inches (600 mm). The choice depends on whether vertical side trims are installed (* with vertical side trims installed) or not (** without vertical side trims).

Top View: The cutout depth is 25 inches (635 mm). Note *** clarifies that this cabinet depth includes the kitchen cabinet front panel. For a flush installation, a minimum inset depth of 22 1/2 inches (570 mm) is necessary, assuming a custom door panel thickness of 3/4 inch (20 mm).

Electrical & Water Connection

Electrical: A properly-grounded, horizontally-mounted electrical receptacle must be installed according to the provided drawing. The diagrams indicate 'EW' (Electrical/Water) connection points.

Water: To connect to the water inlet valve, use a 3/8 inch water inlet hose and a 3/4 inch metal adapter with a length of 60 inches (1524 mm) (not supplied). The diagrams also show 'EW' connection points. Connections placement must be on either side of the cutout.

Installation Requirements

Follow local codes and ordinances for drain requirements. Install a waste line with an air gap (not supplied). Alternatively, a high drain loop of at least 30 inches (762 mm) is recommended to prevent backflow. The drain hose is 74 inches (1880 mm) long and must be connected at a minimum height of 20 inches (508 mm) from the floor.

Dimensions in parentheses are millimeters unless otherwise specified.

Custom Panel Requirements

Door tension can be adjusted to accommodate custom panel weights from 7 lb (3 kg) to 18 lb (8 kg). For custom panels weighing between 18 lbs (8 kg) and 22 lbs (10 kg), the optional Heavy Duty Springs kit HS24DW must be purchased. The suggested panel thickness is 3/4 inch (20 mm).

The dimensions for a custom panel are: height from 25 1/2 inches to 28 1/4 inches (647-717 mm) and width from 23 5/16 inches to 23 7/16 inches (592-596 mm).

	Bertazzoni 24-Inch Built-In Dishwasher Installation and Dimensions Detailed installation guide and product dimensions for Bertazzoni 24-inch panel-ready built-in dishwashers, including cutout requirements, electrical and water connections, and custom panel fitting.
	Bertazzoni DW18S2IPV Dishwasher Installation Dimensions and Requirements Detailed installation drawings and requirements for the Bertazzoni DW18S2IPV 18-inch panel-ready dishwasher, including product and cutout dimensions, electrical and water connections, and installation guidelines.
	Bertazzoni DW60EPR 60 cm Fully Integrated Dishwasher \| Professional Series Specifications Explore the features, specifications, and dimensions of the Bertazzoni DW60EPR, a 60 cm fully integrated dishwasher from the Professional Series. Learn about its capacity, programs, energy efficiency (A++), and quiet operation.
	Bertazzoni Custom Door Panel Specifications for Built-In Refrigerators Detailed specifications for custom door panels for Bertazzoni built-in refrigerator models REF36BMBIPLT and REF36BMBIPRT, including dimensions and weight information.
	Bertazzoni REF30RCBPNV 30" Built-In Refrigerator Column Specifications & Features Detailed specifications, features, dimensions, and installation requirements for the Bertazzoni REF30RCBPNV 30-inch built-in refrigerator column. Panel ready, reversible door, internal water dispenser, Energy Star certified.
	Bertazzoni Dishwasher Installation Dimensions and Requirements Detailed installation guide for Bertazzoni 24-inch built-in dishwashers, including product dimensions, cutout specifications, electrical and water connection guidelines, and installation requirements. Covers models DW24T3IXV and DW24T3IXT.
	Bertazzoni REF36BMBZPNV 36-Inch Built-In Refrigerator with Ice Maker and Water Dispenser Detailed specifications and features for the Bertazzoni REF36BMBZPNV, a 36-inch built-in bottom mount refrigerator with an ice maker, internal water dispenser, and panel-ready design. Energy Star certified.
	Bertazzoni Premium Built-in Refrigerator/Freezer Columns Quick Installation Guide A quick installation guide for Bertazzoni premium built-in refrigerator and freezer columns, detailing steps for setup, leveling, panel alignment, and feature activation like ice makers and water dispensers.