SONOFF Wi-Fi Smart Wall Switch
User Manual V1.0
SONOFF TECHNOLOGIES CO., LTD.
Product Overview
This document provides the user manual for the SONOFF Wi-Fi Smart Wall Switch, model TXEU, version 1.0. The device is a smart wall switch designed for controlling lights and fans remotely via Wi-Fi. It features a sleek tempered glass panel and intuitive touch-sensitive buttons.
Diagram Description: An illustration shows the front of the SONOFF Wi-Fi Smart Wall Switch with three touch-sensitive buttons. Labels indicate: 'Wi-Fi LED indicator' (top left), 'Pairing/Touch button/On/Off LED indicator' (for the central buttons), and 'Tempered glass panel' (the front surface).
Specifications
Specification | Details |
---|---|
Max. input | T0/T1/T2/T3(EU1C): AC 100-240V 50/60Hz 2A T0/T1/T2/T3(EU2C): AC 100-240V 50/60Hz 4A T0/T1/T2/T3(EU3C): AC 100-240V 50/60Hz 3A |
Max. output | T0/T1/T2/T3(EU1C): AC 100-240V 50/60Hz 2A T0/T1/T2/T3(EU2C): AC 100-240V 50/60Hz 2A/Gang 4A/Total T0/T1/T2/T3(EU3C): AC 100-240V 50/60Hz 1A/Gang 3A/Total |
LED load | T0/T1/T2/T3(EU1C/ EU2C): 150W/110V (per channel), 300W/220V (per channel) T0/T1/T2/T3(EU3C): 60W/110V (per channel), 100W/220V (per channel) |
Wi-Fi standard | IEEE 802.11 b/g/n 2.4GHz |
RF | 433.92MHz |
Operating systems | Android 4.1 or higher & iOS 9.0 or higher |
Materials | PC V0 + tempered glass panel |
Dimension | 86x86x35mm |
? T0(EU1C/EU2C/EU3C) does not support the remote controller with 433.92MHz.
Features
Remote Control
Turn on/off the light or fan from anywhere, schedule power on/off and share APP with your family to control.
- ? APP Control
- ⏰ Timing Schedules
- ? Voice Control
- ? Share Control
- ? No Hub Required
- ? RF Remote Control
- ? Touch Control
- ? LED Backlight
- ✨ Smart Scenes
- ? LAN Control
Setup and Operation
Factory Reset
To reset the device to factory defaults, long press any button for approximately 5 seconds until the Wi-Fi LED indicator flashes in a cycle of two short and one long flash. Release the button to confirm the reset. The device will enter quick pairing mode (Touch).
? Please reset the switch to factory defaults if you want to use other Wi-Fi networks, then reconnect the network.
Diagram Description: An illustration shows a hand pressing one of the touch buttons on the SONOFF switch.
RF Remote Controller Pairing
The switch supports pairing with a 433.92MHz RF remote controller for on/off functions. Each channel can be learned independently for local short-range wireless control (not Wi-Fi control).
Pairing Method
Long press the touch button you wish to pair until you hear a "beep" sound, then release. Press the corresponding button on the RF remote controller. You will hear another "beep" sound upon successful pairing. Other buttons can be paired similarly.
Clearing Method
Long press the touch button you wish to clear until you hear two "beep" sounds, then release. Press the corresponding button on the RF remote controller. You will hear a "beep" sound upon successful clearing. Other buttons can be cleared similarly.
Troubleshooting
Common Problems
Q: Why my device stays "Offline"?
A:
The newly added device needs 1-2 minutes to connect to Wi-Fi and the network. If it remains offline for an extended period, check the status of the blue Wi-Fi indicator:
1. Blue Wi-Fi indicator flashes once per second:
This means the switch failed to connect to your Wi-Fi.
- Possible incorrect Wi-Fi password.
- Distance between the switch and router is too great, or environmental interference is present. Move closer to the router. If unsuccessful, re-add the device.
- 5G Wi-Fi network is not supported; only 2.4GHz wireless network is supported.
- MAC address filtering might be enabled. Disable it.
2. Blue indicator flashes twice per second:
This means your device is connected to Wi-Fi but failed to connect to the server.
Ensure your network is stable. Frequent double flashes indicate an unstable network, not a product issue. If the network is normal, try pressing the "Reset Button" or power cycling the switch.
Voice Control Instructions
Scan the QR code to read instructions for voice control with Amazon Echo and Google Home.
Detailed User Guide
Scan the QR code or visit the website: https://www.sonoff.tech/usermanuals to learn the detailed user guide.