SONOFF BASICZBR3 ZigBee DIY Smart Switch
User Manual V1.1
Specifications
| Model | BASICZBR3 |
|---|---|
| Max. Input | 100-240V AC 50/60Hz 10A |
| Max. Output | 100-240V AC 50/60Hz 10A |
| ZigBee | IEEE 802.15.4 2.4GHz |
| Material | PC V0 |
| Dimension | 91x43x25mm |
Product Introduction
The SONOFF BASICZBR3 is a ZigBee DIY Smart Switch. The device features input terminals labeled 'N Input L' and output terminals labeled 'L Output N'. On the top surface, there is a pairing button/manual switch, a green LED signal indicator, and a red On/Off LED indicator. A protective cover is also present.
ℹ️ The product should be installed at a minimum height of 2 meters above the ground.
Features
The BASICZBR3 is a smart switch that uses the ZigBee wireless communication protocol to access the internet via a ZigBee Hub. It enables users to:
- ? Remotely control the device (turn on/off) via a smartphone.
- ⏱️ Schedule on/off times.
- ? Use voice control (requires compatible ZigBee Hub).
- ? Share control with family members for collaborative management.
- ? Create and manage smart scenes.
- ? Utilize LAN control capabilities.
ℹ️ All listed functions are determined by the capabilities of the ZigBee Hub.
Factory Reset
To reset the device to factory default settings:
- Long press the configuration button for 5 seconds.
- Continue pressing until the LED signal indicator flashes.
- Release the button. The reset is successful, and the device will enter pairing mode.
ℹ️ If you need to re-pair the device with a hub, it is recommended to reset the device to factory default first.
