Display Cabinet

Important Information

Assembly Guidance

Please read the entire manual before starting to assemble and/or using this product. Follow the manual thoroughly and keep it for further reference.

Assembly Tips

• Avoid Scratches: Assemble the furniture on a soft layer, such as a rug, to prevent scratching.
• Improve Efficiency: Try to find a partner to assist with installation to speed up the process and shorten the time.

Anti-Topple Warning

• Overturned furniture can cause serious or fatal crush injuries.
• To prevent tipping over, ensure you use the wall attachment if provided. If not included, please purchase a suitable wall attachment for your wall. Seek professional advice if unsure.
• Please read and follow each step of the instructions carefully.

Important Maintenance Note

• Any product assembled using screws should have screws re-tightened 2 weeks after assembly and every 3 months thereafter to ensure stability throughout its lifespan.
• For regular maintenance and cleaning of the frame, use a rag dipped in neutral detergent, wipe thoroughly, and then dry with a clean rag.
• For glass materials, wipe with a rag dampened with glass cleaner and then dry with a dry rag.
• Do not use an electric screwdriver, and do not use excessive force when installing, as the board can easily break.

Tools and Parts

Tools Required

Please prepare the following tools: [Screwdriver], [Hammer], [Drill] (Illustrations of tools are present)

Hardware List

When installing, please carefully confirm that each screw corresponds to the manual. Accessories with similar shapes can be distinguished by size.

• A x 124: CRA0635A
• B x 124: CRB1295A
• C x 24: CRD3514A
• D x 144: CRD3514A
• E x 3: CRD0455A (Ø6 x 35 mm)

Parts Identification

The cabinet is comprised of the following numbered parts:

• Part 1 (x2)
• Part 2 (x2)
• Part 3 (x3)
• Part 4 (x4)
• Part 5 (x2)
• Part 6 (x4)
• Part 7 (x6)
• Part 8 (x6)
• Part 9 (x2)
• Part 10 (x2)
• Part 11 (x2)
• Part 12 (x2)
• Part 13 (x1)
• Part 14 (x4)
• Part 15 (x10)
• Part 16 (x6)
• Part 17 (x4)
• Part 18 (x1)
• Part 19 (x1)
• Part 20 (x1)
• Part 21 (x1)

Assembly Warning: Furniture Tipover

• Children have died from furniture tipover. To reduce the risk of furniture tipover:
• ALWAYS install the tipover restraint provided.
• NEVER put a TV on this product.
• NEVER allow children to stand, climb, or hang on drawers, doors, or shelves.
• NEVER open more than one drawer at a time.
• Place heaviest items in the lowest drawers.

Note: The warning label is permanent and should not be removed.

Assembly Steps

Step 1: Prepare Boards

Screw eccentric rod (A) into boards 1 and 2. Flip board 2 to its back and screw eccentric rod (A) into it as shown. (Illustration shows rods being screwed into pre-drilled holes on boards.)

Step 2: Attach Side Panels

Attach boards 14, 16, 17, and 15 to board 1. Insert cam lock (B) into the corresponding holes on boards 14, 16, 17, and 15, then turn clockwise to tighten. (Illustration shows cam locks being inserted and rotated.)

Step 3: Insert Back Panels (Part 1)

Insert back boards 6 and 7 along the available grooves as shown. (Illustration shows boards sliding into grooves.)

Step 4: Attach Second Side Panels

Attach board 2 to boards 14, 16, 17, and 15. Insert cam lock (B) into the corresponding holes on boards 14, 16, 17, and 15, then turn clockwise to tighten. (Illustration shows cam locks being inserted and rotated.)

Step 5: Attach Shelves (Part 1)

Attach boards 3, 5, 13, and 4 to board 2. Insert cam lock (B) into the corresponding holes on boards 3, 5, 13, and 4, then turn clockwise to tighten. (Illustration shows cam locks being inserted and rotated.)

Step 6: Insert Back Panels (Part 2)

Insert back board 8 along the available grooves as shown. (Illustration shows boards sliding into grooves.)

Step 7: Attach Shelves (Part 2)

Attach board 2 to boards 3, 5, 13, and 4. Insert cam lock (B) into the corresponding holes on boards 3, 5, 13, and 4, then turn clockwise to tighten. (Illustration shows cam locks being inserted and rotated.)

Step 8: Attach Side Panels (Part 2)

Attach boards 14, 16, 17, and 15 to board 2. Insert cam lock (B) into the corresponding holes on boards 14, 16, 17, and 15, then turn clockwise to tighten. (Illustration shows cam locks being inserted and rotated.)

Step 9: Insert Back Panels (Part 3)

Insert back boards 6 and 7 along the available grooves as shown. (Illustration shows boards sliding into grooves.)

Step 10: Attach Main Frame (Part 1)

Attach board 1 to boards 14, 16, 17, and 15. Insert cam lock (B) into the corresponding holes on boards 14, 16, 17, and 15, then turn clockwise to tighten. (Illustration shows cam locks being inserted and rotated.)

Step 11: Attach Top Supports

Fix part (E) to the top of the cabinet using screws (E). (Illustration shows screws being driven into the top edge of the cabinet.)

Step 12: Attach Hinges to Doors

Fix hinges (C) to boards 9, 10, 11, 12, 18, 19, 20, and 21 using screws (D) as shown. (Illustration shows hinges being attached to various door/panel pieces.)

Step 13: Assemble Doors to Cabinet

Assemble the doors to the cabinet by fixing the hinges with screws (D) as shown. (Illustration shows doors being attached to the main cabinet structure using hinges and screws.)

Step 14: Door Alignment

If doors are still not aligned correctly, please watch the video for guidance.

YouTube Video: https://youtu.be/n0Lb36S0ODM

If there is misalignment after installation, adjust the screws on the hinges to achieve the best condition. (Illustrations show hinge adjustment screws and their effect on door alignment.)

Warranty Information

Warranty Claims

• There is a 30-day warranty for broken furniture or other problems that do not work properly. The warranty starts from the date of purchase, verified by proof of purchase.
• For claims, please call to provide your purchase order number and details of the problem. Replacement parts will be arranged within 48 hours. If out of stock, a shipping date will be provided.
• The product must be used according to the provided instructions.
• For returns due to other reasons, the furniture must be cleaned, dried, and returned within 30 days of receipt.

Type of Warranty Claim

• Failure to follow assembly instructions will invalidate the warranty.
• Damage during installation is not covered, but damage during transportation is.

Scope of Responsibility

• No responsibility will be borne for misuse, user damage, or loss of parts during installation.
• Damage and scratches after use are not covered by the warranty.

Warranty Coverage Areas (US)

• Sheet parts: 1 month from the date of purchase.
• Electrical parts: 1 month from the date of purchase.

Returns and After-Sales Contact

Changed Your Mind?

If you have purchased and simply changed your mind, follow the retailer's instructions for returns.

Defective Items

If your item is defective and you cannot identify why, please call for assistance.

Damaged Items

If you receive an order with obvious shipping damage, refuse the delivery. If damage is found after acceptance, follow the retailer's specific instructions. Always save all packaging material and paperwork. Disposing of packaging or attempting returns without contacting the fulfillment provider may jeopardize your claim and credit.

After-Sales Contact

• Email: feedbackstation@163.com
• Phone: (303)800-6387