Zumtobel CAR EVO M LED Mounting Instructions

Product Overview

The CAR EVO M LED is a lighting luminaire designed for efficient illumination. It is available in various configurations and accessories.

Manufacturer: Zumtobel LIGHTING GmbH

Address: Schweizerstrasse 30, 6850 Dornbirn AUSTRIA

Website: www.Zumtobel.com

Key Product Identifiers:

• Models: E14714, E14717, E14866, E14951, E14718, E14721, E14867, LDO 927-65, E15170
• Product Names: CAR EVO M R1 RING, CAR EVO M Q1 FRAME, CAR EVO M Q2 FRAME, CAR EVO M Q3 FRAME
• Available Colors: BK (Black), WH (White)

Important Safety Notices

Please read all important notices before proceeding with installation.

• Installation and commissioning, as well as any modifications, must only be performed by authorized personnel (qualified electrician).
• The manufacturer is not liable for damages resulting from improper installation, operation, or unauthorized modifications.
• The luminaire is intended solely for lighting purposes and must be installed in accordance with national installation regulations.
• Caution: Risk of electric shock! Disconnect mains cables and DALI control lines before maintenance or assembly. Ensure power is off.
• Interruption of the neutral conductor during operation can cause overvoltage damage to the lighting system. Ensure neutral terminals are opened only when de-energized and closed before re-energizing.
• The luminaire is not suitable for covering with thermal insulating material.
• Commissioning should occur after the construction phase when mains voltage is continuously available.
• Dispose of packaging and the luminaire in accordance with applicable regional environmental regulations.
• Keep these instructions in a safe place.
• Technical specifications are subject to change without notice.

Installation Guidelines

General Requirements:

• Mounting Dimensions: Specific dimensions (A, B, C, D, E, H) are provided for different configurations and LED types. Refer to the diagrams for precise measurements. For example, cut-out diameter (Ø145 mm) and minimum ceiling thickness (≥50 mm) are indicated.
• Electrical Connection: Follow wiring diagrams for SWI (SwitchDIM) and LDO (DALI/DSI) connections. Ensure correct polarity and wire gauge (0.5 - 2.5 mm²). Maximum current ratings apply (e.g., max. 12A for LDO).
• Looping-in (Feed Through): The luminaire supports looping-in of cables for continuous wiring. Ensure proper connection of input and output terminals.
• Earthing: Protected earthing is not required for certain configurations (indicated by a symbol).

Step-by-step Installation (Illustrative):

1. Prepare the mounting opening in the ceiling.
2. Connect the luminaire to the mains supply and any control systems (DALI/SwitchDIM) according to the diagrams. Ensure secure connections.
3. Install the luminaire into the mounting opening.
4. Secure the luminaire in place.
5. Perform commissioning after installation is complete and mains voltage is available.

Product Variants and Accessories

The CAR EVO M LED is available with different optical and functional variants:

• Optical Accessories: REFL SP, REFL FL, REFL WFL, FOIL VFL, PROTECTION GLASS, SOFT OUTLINE LENS, HONEYCOMB LOUVRE BK, OVAL OUTLINE LENS, VOPT, BOPT.
• Special Features: IP44 rated versions for enhanced protection, SCO compatibility.
• Tools: COMMISSIONING TOOL ROD, COMMISSIONING TOOL RING, DISMOUNT TOOL are available for installation and maintenance.

Technical Data Summary

Voltage: 220-240V, 50/60Hz

Control Systems: switchDIM, DALI/DSI

Dimensions: Various dimensions provided for different models (e.g., C, D, E values).

Light Source: LED (not replaceable; entire luminaire must be replaced at end-of-life).

Distance to illuminated surface: Minimum distance indicated as >1.37m.

Disposal Information

Dispose of packaging and the luminaire in accordance with applicable regional environmental regulations.