Inventum MK350 Milk Frother

Safety Instructions

• Please read these instructions carefully before operating the appliance and retain them for future use.
• The appliance is intended solely for domestic use within the home.
• ⚠️ The surfaces are liable to get hot.
• The appliance is not intended to be operated by means of an external timer or separate remote-control system.
• Do not exceed the maximum level. Exceeding the filling capacity may cause the jug to overflow.
• Before plugging into a socket, check that the voltage in your home corresponds with the voltage printed on the appliance's rating plate.
• Never let the power cord hang over the edge of a table or counter, touch hot surfaces, or become knotted.
• Never place this appliance on or near a hot gas or electric burner, or in a location where it could touch a heated oven or microwave. Keep the appliance away from curtains, wall coverings, clothing, dishtowels, or other flammable materials during use.
• Always use the appliance on a secure, dry, level surface.
• Never leave the appliance unattended while in use.
• Always carry out regular checks of the power cord to ensure no damage is evident. If there are any signs of damage to the power cord, the entire appliance should be returned to the Customer Service Department.
• For your safety, only use accessories and spare parts from the manufacturer that are suitable for the appliance.
• Always return the appliance to the Customer Service Department for examination, repair, or adjustment if it malfunctions or has been damaged. Special purpose tools may be required.
• Never unplug the appliance from the socket by pulling the cable.
• Always ensure your hands are dry before handling the plug or power cord.
• An electrical appliance is not a toy. Keep it out of reach of children. Children may not always understand the potential risks. Keep the appliance and its cord out of reach of children under 8 years old.
• This appliance may be used by children aged 8 and over, and by persons with reduced physical, sensory, or mental capabilities, or lack of experience or knowledge, provided they are supervised or have been instructed on safe use and understand the risks.
• Children must not play with the appliance.
• Cleaning and user maintenance must not be performed by children unless supervised.
• Unplug the appliance as soon as you have finished using it and when you are cleaning it.
• If an extension cord is used, compare its electrical rating with the appliance's rating. Ensure it cannot be pulled by children or tripped over unintentionally.
• If you decide to discontinue using the appliance, make it inoperative by cutting the power cord after removing the plug from the socket. We also recommend making all potentially dangerous parts of the appliance harmless, especially for children.
• Never use the appliance if it is not working properly or if it has been damaged. Any intervention other than cleaning and normal maintenance must be carried out by an approved Service Centre.
• ? Never immerse any part of the main body, power cord, or plug into water or any other liquid.
• This appliance is intended for household use only. Improper use may void the warranty and preclude claims for damages.
• ♻️ Electrical and electronic equipment must be collected for reuse and recycling. Return such equipment marked with the separate collection symbol to a municipal waste collection point.

Appliance Description

The milk frother consists of the following parts:

• 1. Lid with sealing ring
• 2. Handle
• 3. Control lights (blue/red)
• 4. Start button for heating and frothing
• 5. Base
• 6. Maximum indication for heating milk (MAX)
• 7. Maximum indication for frothing milk (MAX)
• 8. Whisk (frothing attachment)
• 9. Mixer (heating attachment)

The diagram shows the main body of the milk frother with the handle, lid, base, and control lights. The attachments (whisk and mixer) are shown separately.

Before First Use

Before using the appliance for the first time:

• Carefully unpack the appliance and remove all packaging material. Keep packaging (plastic bags, cardboard) out of reach of children.
• Check the appliance for any visible damage that may have occurred during transport.
• Place the appliance on a stable, heat-resistant surface.
• Clean the lid, whisk, and mixer with warm, soapy water. Dry all parts thoroughly.
• Wipe the exterior and interior with a soft, damp cloth and dry thoroughly.
• The appliance is designed only for heating and frothing milk. Do not fill it with other liquids.

Preparing Milk Foam

Ensure the electrical installation matches the rating plate. Plug the appliance into the socket.

Mount the whisk at the bottom of the milk frother. Fill the frother with the desired amount of milk. Note the lower maximum indication for frothing milk (MAX - 115 ml). Frothing milk expands, so overfilling can cause overflow. The minimum capacity is 75 ml.

Making Hot Milk Froth

Place the lid on the frother and set it on the power base. Briefly press the button to switch on the appliance. Both indicator lights (blue/red) will illuminate, and the whisk will start rotating. Depending on the milk quantity, the frother will stop automatically after approximately 90 seconds. The blue light will turn off, and the red light will flash for about 30 seconds to indicate it is ready.

Making Cold Milk Froth

Place the lid on the frother and set it on the power base. Press and hold the button for 1-2 seconds to switch on the appliance. The blue indicator light will illuminate, and the whisk will start rotating. Depending on the milk quantity, the frother will stop automatically after approximately 60 seconds. The blue light will turn off, and the red light will flash for about 30 seconds to indicate it is ready.

Once ready, remove the lid and pour the milk froth into a mug or cup. Only hold the milk frother by its handle, as the rest of the appliance will be hot. Do not use a metal spoon or object to scoop out the froth, as this can damage the coating.

After use, clean the milk frother as described in the Cleaning & Maintenance chapter. Allow the frother to cool for 2 minutes before reusing, or rinse it with cold water for faster readiness.

Tips for Best Results

• Full-cream milk yields the best milk froth.
• Using less than 75 ml of milk may result in a less satisfactory outcome.
• Milk froth quality can vary significantly between different milk brands. Experiment with other brands if needed.

Heating Milk

Mount the mixer attachment at the bottom of the milk frother. Fill the jug with the desired amount of milk, observing the upper maximum indication for heating milk (MAX - 240 ml).

Place the lid back on the jug and set the appliance on the base. Press the start button to begin. The control lights (blue/red) will illuminate, and the mixer will start rotating. The preparation will stop automatically after approximately 100 to 120 seconds, depending on the filling volume. The blue control light will go out, and the red light will blink for about 30 seconds to indicate readiness.

After preparation, remove the lid and pour the hot milk into a cup. After use, clean the appliance as described in the Cleaning & Maintenance chapter. Allow the appliance to cool for 2 minutes before using it again or rinse it with cold water.

Cleaning & Maintenance

Before cleaning, always unplug the appliance and let it cool down completely. Clean the appliance immediately after every use.

• Remove the whisk or mixer by pulling it straight upwards.
• Rinse the inside of the milk frother with hot water to remove milk residue.
• Never use aggressive or abrasive cleaning agents, solvents, or sharp objects that could damage the non-stick coating. Use a soft cloth.
• Clean the lid, sealing ring, whisk, and mixer with warm, soapy water and dry them thoroughly.
• ? Never immerse the appliance, power base, power cord, or plug in water or other liquids.
• Wipe the exterior of the appliance regularly with a damp cloth.

General Terms and Conditions of Service and Warranty

Inventum provides a 2-year full manufacturer's warranty on all products.

• Warranty Period: 2 years from the date of purchase.
• Claiming Warranty: Return the product to the shop of purchase or contact Inventum Customer Service via www.inventum.eu/service-aanvraag. A copy of the original receipt is required.
• Usage: Warranty applies only to normal domestic use within the Netherlands.
• Breakdowns Outside Warranty: Report to Customer Service. Inspection or repair may incur charges.
• Warranty Exclusions:
• Normal wear and tear
• Improper use or misuse
• Insufficient maintenance
• Failure to comply with instructions
• Unauthorized repairs
• Non-original parts
• Commercial or business use
• Removed serial number/rating label
• Consumable items (e.g., filters, batteries, bulbs)
• External connection cables
• Glass accessories
• Transport damage not caused by Inventum (report within 5 days)
• Damage from events normally covered by home contents insurance
• Important Notes:
• Replacement or repair does not extend the original warranty period.
• Unfounded complaints incur costs for the customer.
• Post-warranty repair costs are charged to the customer.
• Inventum is not liable for damage from external causes unless mandated by law.
• Dutch law governs these terms.

Contact Information

Inventum Huishoudelijke Apparaten B.V.

Meander 901
6825 MH Arnhem

T: 0800-4583688

E: info@inventum.eu

W: www.inventum.eu

Follow us:

• Twitter: twitter.com/inventum1908
• Facebook: facebook.com/inventum1908
• YouTube: youtube.com/inventum1908