Safety Instructions
- Read and keep instructions for future reference.
- Use only for intended domestic purposes.
- Avoid touching hot surfaces during operation.
- Do not overfill to prevent boiling water ejection.
- Connect only to a grounded wall socket matching the appliance's voltage.
- Keep the power cord away from hot surfaces, sharp edges, and do not let it hang over edges.
- Place on a stable, dry, level surface, away from heat sources and flammable materials (e.g., curtains).
- Never leave the appliance unattended when in use.
- Unplug before moving or cleaning.
- Do not use if the appliance, plug, or cord is damaged. Repairs must be done by qualified personnel.
- Keep out of reach of children (under 8 years).
- Children aged 8+ and persons with reduced capabilities may use under supervision and with proper instruction.
- Never immerse the appliance, cord, or plug in water or any other liquid.
- Dispose of the appliance responsibly at designated collection points.
Product Description
Key components of the water kettle:
- Spout
- Anti-scale filter
- Lid
- Lid opening button
- Handle
- Water level indicator
- On/off switch with pilot lamp
- Base
Before First Use
Prepare the kettle for its first use:
- Carefully unpack and remove all packaging materials. Keep packaging away from children.
- Check for any visible damage.
- Place the kettle on a heat-resistant, stable surface.
- Minimum fill capacity: 0.5 litres. Maximum fill capacity: 1.7 litres.
- For the first use, fill the kettle to the maximum level twice, boil the water, discard it, and rinse the kettle with cold water.
- This kettle is designed for boiling water only. Do not fill with milk, tea, coffee, or other instant beverages.
How to Use
Boiling Water
- Ensure the voltage matches your home's supply.
- Place the base on a stable surface and connect to an earthed socket.
- Open the lid by pressing the button.
- Fill the kettle with the desired amount of water (between 0.5L and 1.7L) and close the lid.
- Place the kettle on the base and ensure it is properly connected.
- Switch the kettle on by pressing the on/off switch down to position 1. The pilot lamp will illuminate.
- The kettle will automatically switch off when the water boils, and the pilot lamp will turn off.
- Caution: Never operate the kettle without water. Dry-boil protection will automatically shut it off if empty. If this happens, remove from base, let it cool, refill, and switch on again. Ensure the lid is properly closed for correct auto-shutoff.
Switching the Kettle Off
The kettle automatically switches off after boiling. If you wish to boil water again, wait approximately 30 seconds for the switch to cool down before re-switching. You can also switch the kettle off manually at any time using the on/off switch. Removing the kettle from the base during operation will also switch it off. Wait approximately 30 seconds after placing it back on the base before switching it on again.
Maintenance
Descaling
Scale can build up inside the kettle, especially with hard water. Descale regularly using a suitable descaling product or lemon juice.
- Lemon Juice Method: Fill the kettle halfway with warm water, add the juice of half a lemon, boil the water, let it cool for 30 minutes, discard the water, and rinse thoroughly. Refill with fresh water, boil, and discard again.
- Never clean the appliance with detergents, as they can cause damage.
- To clean the anti-scale filter, remove it from the spout when the kettle is cool. Clean with warm water and reinsert correctly.
Cleaning & Maintenance
Clean the kettle and base regularly for optimal performance. Never immerse the kettle, base, or plug in water or other liquids. Always unplug the appliance and let it cool before cleaning. Wipe the exterior with a damp cloth and dry. Do not use abrasive cleaners or scouring agents.
Warranty and Service
Inventum offers a 2-year full manufacturer's warranty on this product. This warranty covers defects under normal domestic use. For warranty claims, contact the retailer or Inventum customer service. The warranty excludes normal wear and tear, misuse, improper maintenance, unauthorized repairs, non-original parts, commercial use, and transport damage not reported promptly.
