Inventum MK360S Milk Frother

Safety Instructions

• Please read these instructions carefully before operating the appliance and keep them for future reference.
• Use this appliance only for its intended purpose as described in this manual.
• Caution! Avoid touching hot surfaces, especially the outside of the appliance when it is in use.
• Caution! Avoid contact with moving parts.
• Do not exceed the maximum fill level; the appliance may overflow.
• Always use the appliance with the cover.
• Before plugging in, check that your home voltage matches the appliance's specifications.
• This appliance is not intended to be operated by means of an external timer or separate remote-control system.
• Never let the power cord hang over the edge of a table or counter, touch hot surfaces, or become knotted.
• Never place the appliance near hot gas or electric burners, ovens, microwaves, or flammable materials like curtains or towels.
• Always use the appliance on a secure, dry, level surface.
• Never leave the appliance unattended while it is operating.
• Do not use the appliance if the plug, cord, or appliance itself is damaged, or if it malfunctions or has been dropped. Contact customer service.
• Never replace the plug or cord yourself. Repairs should only be carried out by qualified technicians.
• Do not use parts not recommended or supplied by the manufacturer.
• Never unplug by pulling the cable; ensure hands are dry when handling the plug or cord.
• Keep the appliance out of reach of children. Children under 8 should not operate or play with the appliance.
• Children aged 8 and above, and persons with reduced physical, sensory, or mental capabilities, may use the appliance under supervision if instructed on safe use and aware of the risks.
• Cleaning and maintenance by children should only be performed under supervision.
• Unplug the appliance when not in use or when cleaning.
• This appliance is intended for household and similar use (e.g., staff kitchens, shops, offices, hotels, farmhouses).
• If the appliance does not function after switching on, check the circuit breaker or fuse in your electrical distribution box.
• Never attempt to repair the appliance yourself.
• Never immerse the appliance, power cord, or plug in water or any other liquid.
• Improper use or use contrary to instructions voids the warranty.
• For disposal, cut the power cord after unplugging and take the appliance to your local waste disposal facility.

Appliance Description

The Inventum MK360S Milk Frother consists of the following parts:

• Lid with sealing ring
• Whisk (for frothing)
• Milk frother jug
• Handle
• Start button for heating and frothing [SSS symbol]
• Start button for cold frothing
• Base/Power station
• Mixer (for heating)
• Maximum fill level indicators for heating and frothing
• Minimum fill indicator

Diagrams illustrate the components and fill level markings.

Before First Use

• Carefully unpack the appliance and remove all packaging material, keeping it out of reach of children.
• Check the appliance for any visible damage that may have occurred during transport.
• Place the appliance on a stable, heat-resistant surface.
• Clean the lid, whisk, and mixer with warm, soapy water and dry them thoroughly.
• Wipe the exterior and interior of the milk frother with a soft, damp cloth and dry completely.
• The appliance is designed solely for heating and frothing milk. Do not use other liquids.

Preparing Milk Foam (Hot or Cold)

• Ensure your home voltage matches the appliance's rating plate and plug it in.
• Fit the whisk into the milk frother jug.
• Fill the jug with the desired amount of milk. For frothing, use between 75 ml (minimum) and 150 ml (maximum). Do not exceed the MAX line.
• Place the lid on the jug and set the appliance on the base.
• Press the [SSS symbol] button for hot frothing and heating, or the cold frothing button for cold frothing. The control light will illuminate, and the whisk will start turning.
• Preparation stops automatically after 75-90 seconds, depending on the fill volume. The control light will go out.
• After preparation, remove the lid and pour the milk foam into a cup or bowl.
• Do not use metal spoons or objects to remove foam, as this can damage the non-stick coating.
• Clean the appliance as described in the 'Cleaning & Maintenance' section after use.
• Allow the appliance to cool for 3 minutes before using it again.
• The milk frother has a built-in safety feature that activates after 5 continuous uses. If the indicator lights flash, the appliance needs to cool down for 5 minutes before restarting.

Tips:

• Whole milk provides the best results for milk foam.
• Using less than 75 ml of milk may lead to less satisfactory results.
• Milk foam quality can vary between brands; experiment with different milk types for optimal results.

Heating Milk

• Fit the mixer into the milk frother jug.
• Fill the jug with the desired amount of milk. For heating, use up to 300 ml (maximum). Do not exceed the MAX line.
• Place the lid on the jug and set the appliance on the base.
• Press the [SSS symbol] button to start. The control light will illuminate, and the mixer will start turning.
• Preparation stops automatically after 90-120 seconds, depending on the fill volume. The control light will go out.
• After preparation, remove the lid and pour the hot milk into a cup.
• Clean the appliance as described in the 'Cleaning & Maintenance' section after use.
• Allow the appliance to cool for 3 minutes before using it again.
• The milk frother has a built-in safety feature that activates after 5 continuous uses. If the indicator lights flash, the appliance needs to cool down for 5 minutes before restarting.

Cleaning & Maintenance

• Always unplug the appliance and let it cool down completely before cleaning.
• Clean the appliance immediately after each use.
• Never use aggressive or abrasive cleaning agents or sharp objects, as they can damage the coating.
• Never immerse the appliance, power base, power cord, or plug in water or other liquids.
• Remove the whisk or mixer by pulling it straight upwards.
• Rinse the inside of the milk frother with hot water. For stubborn residue, use a drop of dishwashing soap and rinse well.
• Caution: Do not rinse the milk frother under the tap, as water may enter the electrical parts and cause damage.
• Use a soft cloth to avoid damaging the non-stick coating.
• Ensure no milk residue remains inside for hygiene and safety.
• Clean the lid, sealing ring, whisk, and mixer with warm soapy water and dry thoroughly.
• Wipe the exterior of the appliance regularly with a damp cloth.

General Service and Warranty Conditions

Inventum provides a 2-year full manufacturer's warranty on all products. Within this period, faulty products or parts are exchanged for new ones free of charge. To claim the warranty, return the product to the store of purchase or contact Inventum customer service via their website. The warranty period begins on the date of purchase, and a copy of the original receipt is required. The warranty is valid for normal domestic use within the Netherlands.

Breakdowns or Faults Outside the Warranty Period: Report issues to customer service. Dispatch costs for inspection or repair are the customer's responsibility. Repairs may incur charges, and prior authorization is needed. For large appliances, a service engineer can be dispatched at the customer's expense (call-out fees, parts, and labor). Repair costs must be paid in advance.

Warranty Exclusions: The warranty does not cover normal wear and tear, improper or misuse, insufficient maintenance, failure to follow operating/maintenance instructions, unauthorized repairs, use of non-original parts, commercial use, or removal of the serial number/rating label. It also excludes consumable items like whisks, filters, batteries, bulbs, glass parts, and transport damage not reported within 5 working days. Damage covered by home contents insurance is also excluded.

Important to Know: Replacement or repair does not extend the original warranty period. Unfounded complaints will result in costs being charged to the customer. Post-warranty repairs will incur all associated costs. Inventum is not liable for damage caused by external factors unless mandated by law. These terms are governed by Dutch law.