Inventum MK750 Milk Frother

Safety Instructions

• Please read these instructions carefully before operating the appliance and retain for future use.
• The appliance is intended solely for domestic use within the home.
• ⚠️ Attention! Avoid touching hot surfaces, especially the outside of the appliance when it is in use.
• Do not exceed the maximum fill level. Exceeding the capacity may cause overflow.
• Before plugging into a socket, check that your home voltage corresponds with the voltage printed on the appliance.
• Never let the power cord hang over the edge of a table or counter, touch hot surfaces, or become knotted.
• Never place this appliance on or near a hot gas or electric burner, heated oven, or microwave. Do not allow it to touch curtains, wall coverings, clothing, or other flammable materials.
• Always use the appliance on a secure, dry, level surface.
• Never leave the appliance unattended when in use.
• Regularly check the power cord for damage. If damaged, return the appliance to the Customer Service Department.
• For your safety, only use manufacturer-approved accessories and spare parts.
• Always return the appliance to the Customer Service Department for examination or repair if it malfunctions or is damaged.
• Never unplug by pulling the cable. Ensure hands are dry before handling the plug, switch, or power cord.
• The appliance is not intended for operation by external timers or remote control systems.
• This appliance shall not be used by children aged 0 to 8 years. Children aged 8 and above can use it if continuously supervised.
• Individuals with reduced physical, sensory, or mental capabilities may use the appliance if supervised and instructed on safe use, understanding the hazards. Keep the appliance and cord out of reach of children under 8 years.
• Cleaning and maintenance shall not be performed by children.
• Supervise children to ensure they do not play with the appliance.
• Unplug the appliance when not in use or when cleaning.
• If using an extension cord, ensure its voltage and power rating are equal to or higher than the appliance's. Use a grounded, approved extension cord.
• Do not attempt self-repair. If a safety device trips, it may indicate a defect requiring professional service. Only use original spare parts.
• Never immerse the power base, power cord, or plug in water or other liquids.
• This appliance is for household use only. Improper use voids warranty and may waive liability for damages.
• To dispose of the appliance, cut the power cord after unplugging. Dispose of responsibly according to local regulations [Recycling symbol].

Appliance Description

The Inventum MK750 milk frother is designed for heating and frothing milk. It consists of the following parts:

• 1. Lid with sealing ring
• 2. Milk jug
• 3. Frothing and heating button [SSS]
• 4. Cold frothing button [❄️]
• 5. Base with heating element
• 6. Maximum indication for heating milk (MAX)
• 7. Maximum indication for frothing milk (MAX)
• 8. Minimum indication
• 9. Mixer (for heating)
• 10. Whisk (for frothing)

Diagram Description: The appliance is a cylindrical milk frother with a lid. It features a main body with a textured grip, a base with controls, and various attachments. Numbered parts include the lid, milk jug, control buttons (frothing/heating, cold frothing), base, fill level indicators, mixer, and whisk.

Before First Use

1. Carefully unpack the appliance and remove all packaging material. Keep packaging out of reach of children.
2. Check for any visible damage that may have occurred during transport.
3. Place the milk frother on a stable, heat-resistant surface.
4. Clean the milk jug, lid, whisk, and mixer with warm water and mild dish soap. Dry all parts thoroughly.
5. Wipe the exterior with a soft, damp cloth and dry thoroughly.
6. The appliance is exclusively for heating and frothing milk. Never fill with other liquids.

Preparing Milk Foam

Check that your home voltage corresponds with the voltage indicated on the appliance's rating plate. Plug in the appliance.

Frothing and Heating Milk

1. Fit the whisk (10) into the milk jug (2).
2. Fill the jug with the desired amount of milk. For frothing, do not exceed the lower MAX indication (approx. 200 ml). Frothed milk expands and can cause overflow if filled too high. The minimum capacity is 75 ml.
3. Place the lid (1) on the jug and place the jug on the base (5).
4. Press the Frothing and heating button [SSS]. The red indicator light will illuminate, and the whisk will start turning.
5. Preparation stops automatically after 90 to 140 seconds, depending on the milk volume. The indicator light will go out.
6. Once preparation is complete, remove the lid and pour the milk foam into a cup or bowl. Handle the appliance only by the black silicone grip, as other parts will be hot.

Cold Frothing Milk

1. Fit the whisk (10) into the milk jug (2).
2. Fill the jug with milk. Do not exceed the lower MAX indication (approx. 200 ml). Minimum capacity is 75 ml.
3. Place the lid (1) on the jug and place the jug on the base (5).
4. Press the Cold frothing button [❄️]. The blue indicator light will illuminate, and the whisk will start turning.
5. Preparation stops automatically after approximately 120 seconds. The indicator light will go out.
6. Once preparation is complete, remove the lid and pour the milk foam. Handle by the silicone grip.

Tips for best results:

• Using whole milk yields the best results.
• If the amount of milk is too low (less than 75 ml), the result may be poor.
• The quality of milk foam can vary between different brands of milk. Experiment with other brands if necessary for a better result.

Heating Milk

1. Fit the mixer (9) into the milk jug (2).
2. Fill the jug with the desired amount of milk. Do not exceed the upper MAX indication (approx. 400 ml) for heating milk only.
3. Place the lid (1) on the jug and place the jug on the base (5).
4. Press the Frothing and heating button [SSS]. The red indicator light will illuminate, and the mixer will start turning.
5. Preparation stops automatically after 90 to 140 seconds, depending on the milk volume. The indicator light will go out.
6. Once preparation is complete, remove the lid and pour the hot milk into a cup.

Cleaning & Maintenance

1. Before cleaning, always unplug the appliance and let it cool down completely.
2. Clean the appliance immediately after every use.
3. Remove the milk jug from the base and take out the whisk or mixer by pulling it straight upwards.
4. Rinse the milk jug with hot water to remove all milk residue. Ensure the inside is clean, as residue can be unhygienic and harmful.
5. Clean the milk jug, lid, whisk, and mixer with warm soapy water. Dry all parts thoroughly.
6. Note: The parts cannot be cleaned in a dishwasher.
7. Never immerse the appliance, power base, power cord, or plug in water or other liquids.
8. Wipe the exterior of the appliance regularly with a damp cloth.

General Service and Warranty Information

Inventum offers a 2-year manufacturer's warranty for all products used domestically in the Netherlands. For warranty claims, return the product to the place of purchase or contact Inventum customer service via www.inventum.eu/service-aanvraag with proof of purchase.

The warranty covers defects within the 2-year period but excludes normal wear and tear, improper use, lack of maintenance, unauthorized repairs, non-original parts, commercial use, and transport damage not caused by Inventum. It also excludes consumables, and damage from events typically covered by home insurance.

Important Notes: Replacement or repair does not extend the original warranty period. Unfounded complaints may incur costs. After the warranty expires, repair and replacement costs will apply. Inventum is not liable for damage caused by external factors unless legally mandated. These provisions are governed by Dutch law.