Momcozy Portable Breast Pump
Installation, Usage, and Care Guide
Installation Instructions
Ensure your hands are clean before installation.
Attach the membrane and valve to the connector.
[Diagram: Membrane and valve being attached to a connector piece.]
Connect the assembled connector to the milk collector.
[Diagram: Assembled connector with membrane and valve attached, connecting to the milk collector.]
Connect the breast shield to the milk collector.
[Diagram: Breast shield being attached to the milk collector.]
Assemble the breast pump and milk collector.
[Diagram: Final assembly of the breast pump motor unit and milk collector.]
How to Prevent Milk Loss & Pumping Tips
Lean forward to ensure your nipple is centered in the breast shield tunnel. The breast pump should fit snugly against your breast.
[Diagram: Person leaning forward with breast shield correctly positioned, nipple centered.]
It is recommended to wear a supportive nursing bra to create a good seal between your breasts and the breast shield.
[Diagram: Person wearing a supportive bra that aids breast shield seal.]
Ensure the breast pump is assembled correctly.
Sit or stand upright while pumping, do not lie down.
Milk Pouring
Hold the milk collector in the correct orientation when pouring milk.
Correct Pouring: ✔️
Incorrect Pouring: ❌
Cleaning and Sterilization
Non-washable parts: Motor unit.
Washable parts: Milk collector, breast shield, membrane, connector, valve.
We recommend cleaning washable parts with soapy water (40-60°C) for 3-5 minutes. For sterilization, use boiling water, steam, or a sterilizer pot at a maximum temperature of 100°C (212°F). Boil and sterilize parts for 5-10 minutes.
Note: It is not recommended to sterilize your breast pump accessories in the microwave, as this will shorten their lifespan.
Tips
The expected lifespan of washable parts is 1-3 months. It is recommended to replace washable parts after long-term storage or before pumping for another child.
The breast pump automatically shuts off after 30 minutes of pumping. If irritation or discomfort occurs, stop using and consult a healthcare provider.
Support
Refer to the troubleshooting video for further solutions if you encounter product issues during installation or pumping. Scan the QR code to access the troubleshooting video.
If you have questions, please contact us via email: support@momcozy.com