YITAHOME PCWYHS-V 2 2-Drawer Mobile File Cabinet Assembly Instructions
Model Numbers: PCWYHS-V 2, FTOFSF-0017, FTOFSF-0018, FTOFSF-0019
Contact Information
For any questions regarding the installation of YITAHOME products, please email: after-sale.cs@hotmail.com.
Alternative Contact Method (Amazon.com Orders Only):
- Log into your Amazon account.
- Navigate to "Your Orders" and locate the purchase.
- Click on "Contact Seller".
General Instructions & Care
Attention: If you notice any fingerprints on the surface, please be aware that they were left during manual lifting. Simply clean the surface using a cloth and rubbing alcohol.
- Gather and organize all required parts before assembling.
- Assemble the cabinet on a flat, clean, and soft surface.
Parts List
- Part A: Two (2) wheels.
- Part B: Two (2) wheels.
- Part C: One (1) handle or knob.
- Part D: Four (4) screws.
- Part E: Two (2) screws (M4 x 12mm).
- Part G: Two (2) metal bars for hanging files.
- Part H: One (1) wrench.
- Part I: One (1) metal bar.
- Part J: One (1) pair of drawer slides.
- Part K: One (1) main cabinet body.
Assembly Instructions
Step 1
Prepare the cabinet body (K). Rotate the main cabinet body (K) 180 degrees. Attach two wheels (B) to the bottom of the cabinet, likely using screws (D).
Step 2
Attach the side components. Connect parts labeled A, B, and D to the main cabinet body (K).
Step 3
Install the drawer handles or knobs (C) onto the drawers using the screws (E).
Step 4
Rotate the assembled cabinet 180 degrees to its upright position.
Step 5: Installing the Hanging File Bar
Follow the method below to install or adjust the hanging file bar (G). The file bar can be positioned in one of three options to accommodate different file sizes: Letter, Legal, or A4.
Position 1: For Letter Size File Folders
Diagram shows the interior of the cabinet. The hanging file bar (G) is inserted horizontally into designated slots. A "Push" action is indicated to secure the bar. The label "Letter Size" is shown.
File Bar Position 2: For Legal Size File Folders
Diagram shows the interior of the cabinet. The hanging file bar (G) is positioned lower to accommodate Legal size file folders. Labels indicate "Legal Size".
File Bar Position 3: For A4 Size File Folders
Diagram shows the interior of the cabinet. The hanging file bar (G) is positioned even lower to accommodate A4 size file folders. Labels indicate "A4 Size".
