YITAHOME DGYX-V1 Shoe Cabinet Assembly Instructions

Step 1

Attach two cam lock housings (E) and eight screws (A) and two screws (F) to panel 1. Ensure the cam lock housings are oriented correctly with the magnet direction facing outward.

[Diagram Description: Panel 1 shown with holes, indicating placement for screws A and F, and cam lock housings E. An inset shows the correct orientation of E.]

Step 2

Insert eight dowels (B) into panels 2, 3, 5, and 6. Insert twelve screws (D) into panels 2, 3, 5, and 6 as indicated.

Panel 2: Attach 3x Dowels (B) and 3x Screws (D).

Panel 5: Attach 2x Dowels (B) and 2x Screws (D).

Panel 3: Attach 3x Screws (D).

[Diagram Description: Panels 2, 3, 5, and 6 are shown with their respective holes for inserting dowels B and screws D.]

Step 3

Continue attaching screws. Panel 2 uses 2x Screws (D). Panel 5 uses 2x Screws (D). Panel 6 uses 2x Screws (C) and 2x Screws (D).

[Diagram Description: Panels 2, 5, and 6 are shown with screws C and D being inserted into pre-drilled holes.]

Step 4

Attach four feet (8) to the bottom of panel 6 using sixteen screws (G).

[Diagram Description: Panel 6 is shown upside down, with four feet (8) being attached using screws G.]

Step 5

Attach panel 7 to the main structure using two dowels (B) and two screws (D). Attach two cam lock housings (E) and two screws (D) to panel 1.

[Diagram Description: Shows panel 7 being connected to the partially assembled cabinet, and cam lock housings E and screws D being added to panel 1.]

Step 6

Attach two brackets (H) and two screws (I) to the inside of the cabinet. Insert twelve dowels (L) into the side panels for shelf support.

[Diagram Description: An interior view of the cabinet shows brackets H and screws I being attached to the side panels. Dowels L are shown being inserted into the side panels.]

Step 7

Insert three shelves (4) onto the dowels (L) previously placed in the side panels.

[Diagram Description: Three shelves (4) are shown being slid into place, resting on the dowels (L) in the cabinet's side panels.]

Step 8

Attach the doors (9 and 10) to the cabinet. For each door, use four cam lock bolts (K), two dowels (J), two screws (M), and two knobs (N).

[Diagram Description: Doors 9 and 10 are shown being attached to the cabinet frame using cam lock bolts K, dowels J, screws M, and knobs N. Close-up views illustrate the cam lock mechanism and knob attachment.]

Step 9

Attach two hinges (Q) and eight screws (R) to the doors and the cabinet frame.

[Diagram Description: Hinges Q are shown being attached to the doors and the cabinet frame using screws R.]

Step 10

Attach two handles (U) and two screws (T) to the doors. For safety and stability, secure the anti-tip accessories (V) to the wall to prevent tipping, injury, and property damage.

[Diagram Description: Handles U are attached to the doors with screws T. Anti-tip straps V are shown being secured to the wall for safety.]