YITAHOME Assembly Instructions

Notice:

1. Follow the installation instructions. Please confirm all accessories are preset before installation.
2. Do not fully tighten the screws during initial assembly. Fully tighten screws only once all pieces which are correctly assembled.
3. If you encounter any problems during installation, please contact YITAHOME customer service.

Parts List

• Panels:
• (1) x1
• (2) x1
• (3) x4
• (4) x2
• (5) x1
• (6) x1
• (7) x1
• (8) x1
• (9) x1
• (10) x1
• (11) x1
• (12) x1
• Hardware:
• A (M7*50) x12
• B (M4*20) x2
• C (M3.5*14) x30
• D (M6*40) x32
• E (M15*11) x32
• F (M8*50) x10
• G (M4*20) x2
• H (M3.5*14) x2
• I (M6*40) x4
• J (M15*11) x4
• K (M6*6) x6
• L (M4*4) x4
• M (M8*1) x1
• N (M6*40) x2
• O (M8*1) x1

Assembly Steps:

STEP 1:

Attach panel (3) to panel (4) using screws (A). Repeat for the second set.

STEP 2:

Connect panels (1) and (2) to the assembled base from Step 1 using screws (D).

STEP 3:

Attach panel (4) to the side panels (1) and (2) using screws (E).

STEP 4:

Attach panel (5) to the structure. Insert dowels (H) into the designated holes and secure with screws (D) and (I).

STEP 5:

Assemble the drawer sides using panels (E) and (F) and attach to the main structure using screws (A).

STEP 6:

Attach panels (7) and (8) to the structure using screws (D) and (M).

STEP 7:

Connect panel (3) to the side panels (7) and (8) using screws (E).

STEP 8:

Attach panels (5) and (9) to the structure using screws (F) and (E).

STEP 9:

Insert panel (10) into the designated slot.

STEP 10:

Assemble the doors (11) and (12) using screws (B), (C), (G), and (H).

STEP 11:

Attach the assembled doors (11) and (12) to the main cabinet using screws (J).

STEP 12:

Attach panel (6) to the top of the cabinet using screws (I).

STEP 13:

Secure panel (9) to the back of the cabinet using screws (A) and (F).

STEP 14:

Insert shelves (E) into the side panels.

STEP 15:

Attach the back panels using screws (C) and (K). Secure the unit to the wall using brackets (N) and screws (O).

STEP 16:

Attach the handle (9) to the drawer.

STEP 17:

Secure the unit using screws (C) and (L).

STEP 18:

Wall Mounting: Drill holes of 8mm diameter on the wall, with a depth of 50mm. Insert anchors (N) and secure the unit using long screws (N).

STEP 19:

Installation Completed: Secure the unit to the wall using the provided anti-tip accessories (N).

Important Safety Information:

Attention: For safety and stability, YITAHOME suggests securing the anti-tip accessories to the wall to prevent tipping, injury, and property damage.

Contact Information:

For any questions regarding the installation of YITAHOME® products, please contact YITAHOME customer service:

• Phone: +1(888)-717-8084 (Mon-Fri 8:00 AM-4:30 PM PST / Saturday 8:00 AM-12:00 PMPST)
• Email: after-sale.cs@hotmail.com

Alternative contact method for Amazon.com orders:

1. Log into your Amazon account.
2. Go to "Your Orders" and find the purchase.
3. Click on "Contact Seller".