EKET Cabinet Assembly Instructions

Step 1: Gather Tools

Prepare the necessary tools:

• Screwdriver ?
• Spirit level ?
• Drill ?
• Drill bit Ø 8 mm (5/16")

Diagram shows the tools laid out.

Step 2: Attach Connectors

Attach connector pieces to the side panels.

• Insert screws (108444) into connector pieces (139468 / 155198).
• Secure the connector pieces to a panel.
• A close-up shows the correct insertion and locking mechanism, indicated by "Click!".
• An incorrect method is shown with a ❌ symbol.
• A hand symbol ✋ indicates where to apply pressure.

Diagram shows two such connections being made on a panel.

Step 3: Connect Side Panels

Connect the first side panel to the base/top panel.

• Insert three connector pins into the edge of one panel.
• Align the second panel and push it onto the pins.
• A close-up shows the pin insertion and alignment.
• A hand symbol ✋ indicates pressing down to secure.

Diagram shows a panel being connected to another, forming a corner.

Step 4: Attach Second Side Panel

Attach the second side panel to the assembly.

• Similar to Step 3, align and connect the second side panel.

Diagram shows the second side panel being attached, forming a box structure.

Step 5: Insert Back Panel

Slide the back panel into the grooves of the cabinet frame.

• Ensure the panel is oriented correctly.
• Close-ups show correct (groove alignment) and incorrect ❌ methods.

Diagram shows the back panel sliding into place.

Step 6: Attach Top Panel

Place and secure the top panel.

• Align the top panel with the frame.
• A hand symbol ✋ indicates pressing down to secure.

Diagram shows the top panel being attached to the assembled frame.

Step 7: Attach Bottom Panel

Attach the bottom panel to the assembled frame.

• Align the bottom panel and secure it.
• A warning symbol ⚠️ is shown, indicating caution.

Diagram shows the bottom panel being attached.

Step 8: Attach Feet

Screw the feet into the bottom of the cabinet.

• Use feet parts (10093081, 10093082).
• Insert and twist the feet to secure them.

Diagram shows feet being screwed into the base of the cabinet.

Step 9: Cabinet Configurations

Overview of possible EKET cabinet configurations (e.g., with doors, open shelves).

Diagram shows two different EKET cabinet examples.

Step 10: Attach Wall Mounting Brackets

Attach the wall mounting brackets to the back of the cabinet.

• Use bracket parts (141413) and screws.

Diagram shows two brackets being screwed onto the back panel of the cabinet.

Step 11: Prepare Wall for Mounting

Mark and drill holes in the wall for the wall mounting system.

• Use a spirit level ? to ensure accuracy.
• Drill holes with Ø 8 mm (5/16") drill bit.

Diagram shows drilling holes in a wall, guided by a spirit level.

Step 12: Install Wall Mounting Hardware

Attach the corresponding wall mounting hardware to the wall.

• Use hardware part (141414).

Diagram shows the wall hardware being attached to the wall.

Step 13: Align Cabinet with Wall Mounts

Position the cabinet to engage with the wall mounting hardware.

• Align the brackets on the cabinet with the hardware on the wall.

Diagram shows the cabinet being moved towards the wall, with close-ups of the bracket engagement.

Step 14: Attach Door Hinges (Part 1)

Attach the first set of hinge parts to the cabinet frame.

• Use hinge parts (152651).
• An incorrect attachment method is shown with a ❌ symbol.

Diagram shows hinge components being attached to the cabinet's side panel.

Step 15: Attach Door Hinges (Part 2)

Attach the second set of hinge parts to the cabinet frame.

• Use hinge parts (152650).

Diagram shows more hinge components being attached to the cabinet's side panel.

Step 16: Install Shelf Supports

Insert shelf supports into the desired holes inside the cabinet.

• Use shelf supports (131372).
• Diagrams show correct placement and a crossed-out incorrect placement.

Diagram shows shelf supports being inserted into the side panels.

Step 17: Insert Shelves

Place the shelves onto the installed supports.

• Ensure shelves are level and seated correctly.

Diagram shows shelves being placed onto the supports inside the cabinet.

Step 18: Attach Door Handles

Attach the door handles or knobs to the doors.

• Use handle parts (10119658 / 10119673).

Diagram shows handles being attached to the doors with screws.

Step 19: Attach Door (Part 1)

Prepare to attach the door to the cabinet.

• Align the door with the cabinet hinges.
• Use screws (108444) and washer (101313).

Diagram shows the door being aligned with the cabinet and screws being inserted.

Step 20: Attach Door (Part 2)

Complete the attachment of the door to the hinges.

• Use hinge attachment parts (133127 / 155201) and (139477 / 155200).
• A "Click!" sound is indicated, signifying secure attachment.

Diagram shows the door being connected to the hinges, with a close-up of the locking mechanism.

Step 21: Final Door Attachment

Finalize the door attachment to the cabinet.

Diagram shows the door fully attached and aligned.

Step 22: Adjust Door

Adjust the door hinges for proper alignment and closure.

• Use adjustment screws on the hinges.
• Arrows indicate adjustment directions.

Diagram shows adjustments being made to the door hinges. Close-ups illustrate the adjustment points.

Step 23: Final Check

Ensure the door closes correctly and smoothly.

• A "Click!" sound is indicated.

Diagram shows the cabinet door closing properly.