EKET Storage Unit
Important Safety Information
⚠️ Serious or fatal crushing injuries can occur from furniture tip-over.
To prevent this furniture from tipping over, it must be permanently fixed to the wall using the wall attachment fittings included in the packaging. If the product is to be hanged on the wall, it must be done with the designated suspension rail (sold separately at IKEA). Assess the wall to ensure that it will withstand the weight. As wall materials vary, screws for wall fixation are not included. For advice on suitable screw systems for your wall, contact your local specialised dealer. Wall fixing/ hanging must be carried out by a qualified person, since wrong fixation may cause injury or damage.
Tools Required
- Screwdriver ?
- Spirit Level ?
- Drill
- Drill bit Ø 8 mm (5/16") ?
Diagrams show the necessary tools and indicate that incorrect wall mounting can lead to injury or damage, while correct mounting prevents tip-over.
Parts List
| Part Number | Description | Quantity |
|---|---|---|
| 10093081 | Bracket/Clip | 4x |
| 10093082 | Bracket/Clip | 4x |
| 108444 | Screw | 3x |
| 101313 | Washer/Cap | 1x |
| 152650 | Cap/Cover | 2x |
| 152651 | Cap/Cover | 2x |
| 141413 | Cam Lock Housing | 2x |
| 141414 | Decorative Cap | 2x |
| 133127 / 155201 | Dowel/Connector | 1x |
| 139477 / 155200 | Dowel/Connector | 1x |
| 139467 / 155197 | Hinge Part | 1x |
| 139468 / 155198 | Hinge Part | 1x |
| 10119600 | Dowel/Connector | 2x |
| 10119658 / 10119673 | Hinge Part | 2x |
Assembly Instructions
Step 1: Prepare Panels
Diagram shows four panels (likely sides, top, and base) with pre-drilled holes. An inset shows how the connecting elements fit into the panel edges.
Step 2: Insert Connectors
Diagram shows inserting dowels (wooden pegs) and cam lock housings into designated holes on the panels. An inset shows a dowel being inserted and a cam lock being rotated to secure a connection.
Step 3: Attach Back Panel
Diagram shows sliding the back panel into grooves on the side and base panels.
Step 4: Assemble Frame
Diagram shows attaching the side panels to the base and back panel assembly.
Step 5: Attach Top Panel
Diagram shows placing and securing the top panel onto the assembled frame.
Step 6: Attach Back Panel
Diagram shows attaching the back panel to the main structure.
Step 7: Secure Back Panel
Diagram shows securing the back panel using small clips. An inset shows a close-up of a clip being pressed into place.
Step 8: Attach Wall Mounting Brackets (Unit Side)
Diagram shows attaching wall mounting brackets to the rear of the assembled unit. An inset shows a close-up of the bracket and screw.
Step 9: Attach Wall Mounting Brackets (Wall Side)
Diagram shows attaching wall mounting brackets to the unit. The inset shows the parts used: clips (10093081, 10093082) and screws (10093081, 10093082).
Step 10: Attach Feet
Diagram shows attaching the feet to the bottom of the unit. An inset shows a close-up of the foot being screwed into place.
Step 11: Stack Units (Optional)
Diagram shows stacking two assembled units vertically and securing them together. An information icon (ⓘ) indicates this is an optional step or for combining units.
Step 12: Attach Decorative Caps
Diagram shows attaching decorative caps (141414) to the feet. An inset shows the cap being pressed onto the foot.
Step 13: Attach Door Hinges
Diagram shows attaching hinge parts to the unit frame. An inset shows a close-up of the hinge mechanism.
Step 14: Attach Door Hinges
Diagram shows attaching hinge parts to the unit frame. An inset shows a close-up of the hinge mechanism.
Step 15: Attach Door Hinges
Diagram shows attaching hinge parts to the unit frame. An inset shows a close-up of the hinge mechanism.
Step 16: Attach Door Hinges
Diagram shows attaching hinge parts to the unit frame. An inset shows a close-up of the hinge mechanism.
Step 17: Attach Door Hinges
Diagram shows attaching hinge parts to the unit frame. An inset shows a close-up of the hinge mechanism.
Step 18: Install Shelf Supports
Diagram shows inserting shelf support pins into the pre-drilled holes inside the unit.
Step 19: Attach Door Hinges
Diagram shows attaching hinge parts to the unit frame. An inset shows a close-up of the hinge mechanism.
Step 20: Attach Door
Diagram shows attaching the door to the unit by aligning the hinges. An inset shows a close-up of the hinge connection.
Step 21: Attach Door
Diagram shows attaching the door to the unit. An inset shows the hinge mechanism clicking into place, indicating a secure connection.
Step 22: Adjust Door
Diagram shows adjusting the door's position using screws on the hinges. Arrows indicate adjustment directions.
Step 23: Attach Door
Diagram shows attaching the door to the unit.
Step 24: Final Check and Adjustment
Diagram shows the assembled unit with the door. Arrows indicate potential adjustments for the door. Another diagram shows two units being joined side-by-side, with an inset showing the connection mechanism clicking into place.
