EKET Wall-Mounted Cabinet Assembly Instructions
Important Safety Information
⚠️ WARNING: Serious or fatal crushing injuries can occur from furniture tip-over. To prevent this furniture from tipping over, it must be permanently fixed to the wall using the wall attachment fittings included in the packaging. If the product is to be hanged on the wall, it must be done with the designated suspension rail (sold separately at IKEA). Assess the wall to ensure that it will withstand the weight. As wall materials vary, screws for wall fixation are not included. For advice on suitable screw systems for your wall, contact your local specialised dealer. Wall fixing/hanging must be carried out by a qualified person, since wrong fixation may cause injury or damage.
Parts List
| Part Number | Quantity |
|---|---|
| AA-1908758 | 1x |
| (Unspecified Component) | 2x |
| (Unspecified Component) | 2x |
| (Unspecified Component) | 1x |
| (Unspecified Component) | 1x |
| 139467 / 155197 | 2x |
| 139468 / 155198 | 2x |
| 10119600 | 1x |
| 10119658 / 10119673 | 1x |
| 141413 | 1x |
| 141414 | 1x |
| 133127 / 155201 | 1x |
| 139477 / 155200 | 1x |
| 10093081 | 3x |
| 10093082 | 3x |
| 108444 | 4x |
| 101313 | 4x |
| 152650 | 4x |
| 152651 | 4x |
Assembly Instructions
-
Step 1
Prepare a single component. (Refer to diagram on page 8).
-
Step 2
Attach two side panels (Part Numbers: 108444 and 139468 / 155198) to the base/top panel using the provided fasteners. (Refer to diagram on page 9).
-
Step 3
Insert three shelf components (Part Number: 1) into the designated slots. (Refer to diagram on page 10).
-
Step 4
Attach a connecting component. (Refer to diagram on page 11).
-
Step 5
Attach further structural components. (Refer to diagram on page 12).
-
Step 6
Continue assembling the frame. (Refer to diagram on page 12).
-
Step 7
Connect two specific components. (Refer to diagram on page 13).
-
Step 8
Join two more components. (Refer to diagram on page 14).
-
Step 9
Attach three shelf components (Part Number: 1) and another component. (Refer to diagram on page 15).
-
Step 10
Attach two components and a connecting piece (Part Number: 1). (Refer to diagram on page 16).
-
Step 11
Secure two components using two screws (approx. 8mm / 5/16 inch diameter). (Refer to diagram on page 17).
-
Step 12
Secure two components using two screws. (Refer to diagram on page 18).
-
Step 13
Attach two components. (Refer to diagram on page 19).
-
Step 14
Connect two pairs of components. (Refer to diagram on page 20).
-
Step 15
Connect two pairs of components. (Refer to diagram on page 21).
-
Step 16
Attach two components to one central component. (Refer to diagram on page 22).
-
Step 17
Attach two components. (Refer to diagram on page 23).
-
Step 18
Attach two components. (Refer to diagram on page 24).
-
Step 19
Attach two components. (Refer to diagram on page 25).
-
Step 20
The cabinet is now assembled. Attach the wall mounting accessory (Part Number: AA-1908758) to the back of the cabinet as shown. The EKET logo is visible. (Refer to diagram on page 26).
