OttLite Natural Daylight LED Flex Lamp

Congratulations!

Thank you for purchasing the OttLite Natural Daylight LED Flex Lamp. OttLite provides advanced natural lighting technology.

Product Registration: Please complete the enclosed Product Registration Form and return it by mail, or register online at OttLite.com/warranty.

Product Overview and Assembly

This unit is fully assembled.

Operation Instructions:

1. Remove the lamp from its packaging and place the lamp body base (A) on a steady surface.
2. Connect the AC adapter input (E) into the connector (F) located at the rear-bottom of the lamp.
3. Plug the AC adapter (D) into a standard household 120V AC outlet. Note: Use only the supplied AC adapter to avoid damage or fire.
4. Turn the lamp ON & OFF using the power switch (B) located on the front-upper side of the base (A). The power switch (B) is a touch switch that controls a 3-level brightness dimmer function.
5. To adjust LED settings, slightly touch the switch to achieve the following:
   • Turn lamp "ON" to the first lower-brightness setting: touch the switch once.
   • For medium brightness: touch the switch twice.
   • For high brightness: touch the switch three times.
   • Turn lamp "OFF": touch the switch four times.
6. To position the shade, simply bend the flex-neck (G) as needed to direct the light. Please hold the lamp base (A) while adjusting the lamp. Take care not to overextend the lamp to avoid unbalancing it and causing damage. Refer to diagrams for the lamp's maximum adjustment range.

Diagrams Description: The diagrams illustrate the adjustable neck (G) with a vertical direction range of -60° to 60°, and various articulation points (A, B, C, D, E, F, G, L) showing how the lamp can be positioned. One diagram indicates that the lamp cannot be used in a specific position.

Safety Warnings

To reduce the risk of fire, electric shock, or injury to persons:

• Turn the lamp OFF and wait until the lamp head (C) and adapter (D) are cool before handling.
• The LED panel (L) may become hot after several hours of continuous use. DO NOT place your hands directly on the LED light panel.
• Never use with an extension cord unless the plug can be fully inserted into the receptacles in the extension cord.
• Do not alter the plug.
• The LED panel (L) included with this unit cannot be replaced by the consumer.

Note: The important safety instructions in this document are not exhaustive and may not cover all possible conditions and situations. Common sense, caution, and care must be used with any electrical product.

Caution: If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard. Indoor use only.

FCC Part 15 Compliance

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that of the receiver.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution: Any change or modification to the product not expressly recognized by OttLite Technologies voids OttLite's responsibility for proper function of the product.

CAN ICES-005 (B)/ NMB-005 (B)

AC/DC Adapter Specifications

Input: AC 100-240V, 50/60 Hz, 0.2A

Output: 20V DC, 250mA with a Male DC Plug