JLab GO WORK Headphones: User Guide
Concise guide to using your JLab GO WORK headphones.
Getting Started
JLab is pleased to accompany you on your journey. We are proud of our products and stand by them.
Your Warranty: All warranty claims are subject to JLab authorized terms and are at JLab's sole discretion. Retain your proof of purchase to ensure warranty coverage.
Contact Us: Email support@jlab.com or visit intl.jlab.com/contact
Register Now: Visit intl.jlab.com/register for product updates, user manuals, FAQs, and more.
CMIIT ID: XXXXXXXXXX
Bluetooth Pairing
- Turn on Bluetooth in your device's settings. ?
- Press and hold the power button for 8 seconds. Release. The indicator light will flash blue/red, indicating pairing mode.
- In your device's Bluetooth settings, select "JLab GO Work" to connect.
Multipoint Connection (Connect 2 Devices Simultaneously)
- After connecting the first device, turn off Bluetooth in that device's settings. The GO WORK headphones will automatically enter Bluetooth pairing mode.
- Navigate to the second device's Bluetooth settings and select "JLab GO Work" to connect.
- Go back to the first device's settings, turn on Bluetooth, and reconnect to "JLab GO Work".
For more information and troubleshooting on multipoint connection, visit: intl.jlab.com/multipoint
Button Functions
| Action | Button Press |
|---|---|
| Volume Up | Press once ? |
| Track Forward | Press and hold for 2+ seconds ▶️ |
| Volume Down | Press once ? |
| Track Backward | Press and hold for 2+ seconds ◀️ |
| Power On/Off | Press and hold for 2+ seconds ? |
| Play/Pause/Answer/End Call | Press once ▶️/⏸️ |
| Reject Call | Press and hold for 1+ second ❌ |
| Activate Siri (iOS) or "OK Google" (Android) | Press twice ?️ |
| Be Aware On/Off (during calls) | Press three times |
| Bluetooth Pairing | Refer to Bluetooth Pairing section |
Additional Controls:
- Switch EQ (Voice/Music): Press both volume buttons simultaneously. ?️
- The headphones feature a rotating boom microphone that can be moved left or right. ?
- Microphone Mute: Press the dedicated mute button on the microphone boom. ?
Charging
Connect the headphones to a computer or a USB 5V 1A (or smaller) output device using the provided cable.
Note: The GO WORK headphones can charge while simultaneously connected via Bluetooth.
Ensure the power is on and the device is connected after charging begins.
Diagram Description: A USB cable connects to the charging port on the headphones and then to a power source, such as a computer's USB port or a wall adapter.
AUX Input
The GO WORK headphones can be used as a wired headset via the AUX cable.
Note: To ensure the microphone functions correctly, the headset will consume a limited amount of power even when used in wired mode.
Diagram Description: An AUX audio cable connects to the headphone's AUX port and then to an audio source device, such as a laptop or smartphone.
Important Notes & Precautions
- Avoid exposing the earcups to water or liquids. ?
- Avoid extreme heat, cold, and humidity. ?️
- Prevent dropping or crushing the headphones. Do not pull the cable with excessive force, yank it, or bend it at sharp angles. ⚠️
- Earwax buildup in the earcups can reduce sound quality. Clean earwax carefully with a cotton swab or other small tool to maintain optimal sound.
- If you experience discomfort or pain, try lowering the volume or taking a break from use.
- If discomfort persists while using this product, discontinue use and consult a medical professional.
- Treat your headphones with care, similar to how you would handle stylish sunglasses. Store them safely when not in use. ?
Shop & Resources
Explore more: JLab Store | Product Notices | Burn-in Tool
Download the JLab App:
