Important Safety Information
Caution!
Technical devices are of considerable value. Handle components carefully during installation and protect them if necessary.
If necessary, the installation area should also be secured. Falling parts can cause injuries and material damage.
The materials included in the scope of delivery may not be suitable for the special conditions at the installation site. Please check this in advance and replace them with suitable materials if necessary.
If you are unsure about the installation of the product or have any questions, please contact HAGOR Products GmbH or other trained specialists.
Scope of Delivery
The following parts are included in the delivery:
| Part | Description | Quantity |
|---|---|---|
| A1 | M4x25MM Screw | 4x |
| A2 | M5x25MM Screw | 4x |
| A3 | M6x25MM Screw | 4x |
| A4 | M8x25MM Screw | 4x |
| A5 | TV Plate Component | 4x |
| A6 | Square Washer (A6) | 4x |
| Mounting Screw | 6x | |
| Mounting Screw | 6x | |
| Mounting Screw | 6x | |
| Wall Plate | 1x | |
| TV Plate / VESA Bracket | 1x | |
| Plastic Cover | 1x | |
| M6x12mm Screw | 1x | |
| Bubble Level, magnetic, removable | 1x | |
| Allen Key 5 mm | 1x |
Installation Steps
Step 1: Wall Mounting
Choose the appropriate mounting method based on your wall type.
1a. Concrete / Brick Wall Mounting
For concrete or brick walls, use the provided mounting screws (e.g., B1, B2, B3). Drill holes with a diameter of 10 mm (3/8") and a depth of 60 mm. Secure the wall plate to the wall.
Diagram Description: Shows a concrete wall with pilot holes. The wall plate is positioned and secured using screws. A detail shows the recommended drill hole size (10 mm / 3/8") and depth (60 mm).
1b. Wood Stud Wall Mounting
For wood stud walls, use the provided mounting screws (e.g., B1, B3). Drill pilot holes with a diameter of 5 mm (3/16") and a depth of 60 mm. Secure the wall plate to the wall, ensuring it is anchored into the studs.
Diagram Description: Shows a wood stud wall with pilot holes. The wall plate is positioned and secured using screws. A detail shows the recommended pilot hole size (5 mm / 3/16") and depth (60 mm).
Step 2: Attaching the TV Plate to the TV
Use the square washer (A6) and appropriate screws (A1-A4) to attach the TV plate components (A5) to the back of your television. Ensure you use the correct hole on the square washer for the screw size:
- Hole 1: For M8 screws
- Hole 2: For M5 and M6 screws
- Hole 3: For M4 screws
Diagram Description: Shows the back of a TV. The TV plate components (A5, A6) are aligned with the VESA mounting holes on the TV. Screws (A1-A4) are used to secure the plate. A diagram of the square washer (A6) indicates which hole to use for M8, M5/M6, and M4 screws.
Step 3: Assembling the Bracket
Assemble the main bracket structure as shown in the diagram. This typically involves connecting the arm components to the wall plate adapter.
Diagram Description: Illustrates the assembly of the main TV bracket arms and their connection to the part that attaches to the wall plate.
Step 4: Mounting the Bracket to the Wall Plate
Attach the assembled bracket to the wall plate that is already mounted on the wall. Use the M6x12mm screws for this connection.
Diagram Description: Shows the assembled bracket being attached to the wall plate on the wall. A detail highlights the use of M6x12mm screws.
Step 5: Securing the TV and Adjustments
Slide the TV, with the attached plate, onto the mounted bracket. Secure the TV using the tension screw. Adjust the viewing angle as needed:
- Swivel: ±45°
- Tilt: -2° to 12°
- Fine adjustment: ±3°
Diagram Description: Shows the TV being attached to the bracket. A tension screw is used to lock the TV in place. Indicators show the adjustable tilt range (-2° to 12°) and swivel range (±45°), along with a fine adjustment tilt of ±3°.
