HAGOR BL Superslim Tilt 600 Installation Manual

Model Number: 8405

Safety Information

Caution! Technical devices are of considerable value. Handle components carefully during installation and protect them if necessary. Secure the installation area if needed. Falling parts can cause injuries and material damage. The materials included in the scope of delivery may not be suitable for the special conditions at the installation site; please check this in advance and replace them with suitable materials if necessary. If you are unsure about the installation of the product or have any questions, please contact HAGOR Products GmbH or other trained specialists.

Important Note

Installation requires two people. ?

Scope of Delivery

The following parts are included:

Part A (x2): Main mounting arms/plates
Part B (x1): Wall mounting bracket
Part C (x1): Possibly a locking bar or similar component
Hardware M-A: M5x14 screws (x4)
Hardware M-B: M6x14 screws (x4)
Hardware M-C: M6x30 screws (x4)
Hardware M-D: M8x30 screws (x4)
Hardware M-E: M8x50 screws (x4)
Hardware M-F: D5 washers/spacers (x4)
Hardware M-G: D8 washers/spacers (x4)
Hardware M-H: Small bolts/washers (x8)
Hardware M-I: Small bolts/washers (x8)
Wall Screws W-A: Screws for wall mounting (x4)
Wall Anchors W-B: Anchors/plugs for wall mounting (x4)
Washers W-C: Washers for wall mounting (x4)

Installation Steps

Installation to a Wood Stud Wall

Diagram shows attaching the wall bracket (Part B) to a wood stud wall. Requires drilling holes with a diameter of Ø 4.5mm (3/16") to a depth of 55mm (2.2"). Secure using washers (W-C) and screws (W-A).

1. Locate wall studs. 2. Drill pilot holes of Ø 4.5mm (3/16") to a depth of 55mm (2.2"). 3. Attach the wall bracket (Part B) using washers (W-C) and screws (W-A). Ensure secure mounting. ✔️

Installation to a Concrete or Brick Wall

Diagram shows attaching the wall bracket (Part B) to a concrete or brick wall. Requires drilling holes with a diameter of 10mm (3/8") to a depth of 60mm (2.4"). Use wall anchors (W-B) and secure with washers (W-C) and screws (W-A).

1. Drill holes of 10mm (3/8") diameter to a depth of 60mm (2.4"). 2. Insert wall anchors (W-B) into the holes. 3. Attach the wall bracket (Part B) using washers (W-C) and screws (W-A). Ensure secure mounting. ❌ (if not done correctly)

Installation of the VESA Mount (Flat Back TV)

Diagram shows attaching the VESA mounting arms to the back of a TV with a flat rear surface. Use screws M-A, M-F, M-B, M-G as appropriate for the TV's VESA pattern. Includes check/cross icons.

Attach the VESA mounting arms to the back of the TV using the provided screws (e.g., M-A, M-B, M-F, M-G) and any necessary spacers. Ensure the correct screw length and type are used to avoid damaging the TV. ✔️

Installation of the VESA Mount (Irregular Back TV)

Diagram shows attaching VESA mounting arms to a TV with a curved or irregular rear surface. Various screw combinations (M-C/M-D, M-E, M-G, M-H, M-I) are shown for different VESA hole depths and configurations.

For TVs with curved or irregular backs, select the appropriate screws and spacers (e.g., M-C/M-D, M-E, M-G, M-H, M-I) to ensure a secure and flush fit. Consult the diagrams for specific combinations based on your TV model.

Mounting the TV and Height Adjustment

Diagram illustrates hanging the TV onto the wall-mounted bracket and adjusting its height. Shows a locking mechanism and a clearance of 8mm.

Carefully hang the TV onto the wall bracket. Adjust the height as needed. The mechanism allows for height adjustment and locking. Ensure the TV is securely seated and locked in place.

Adjustment

Diagram shows the mounted TV with tilt adjustment range from 0° to -12°.

The mount allows for tilt adjustment from 0° to -12° to achieve the optimal viewing angle.

Release from Lock

Diagram shows how to release the TV from the wall mount's locking mechanism, indicated by a downward arrow and a hand icon.

To release the TV from the mount, engage the release mechanism as shown in the diagram. This typically involves pressing or pulling a lever or tab. [hand] ⬇️

Dimensions

Diagram displays the overall dimensions of the wall mount.

Overall Width: 702 mm
Horizontal VESA Compatibility: min 100 mm ~ max 600 mm
Vertical VESA Compatibility: min 100 mm ~ max 400 mm
Height of Mounting Arms: 452 mm
Minimum Distance from Wall: 8 mm
Other dimensions indicated: 90 mm, 60 mm, 30 mm.
Tilt Angle Range: 0° to -12°

	HAGOR BrackIT® M TV Wall Mount Installation Guide (Model 8428) Comprehensive installation manual for the HAGOR BrackIT® M TV wall mount (Art.-Nr.: 8428), detailing safety precautions, parts list, step-by-step assembly, and dimensions.
	HAGOR BrackIT® S-I TV Wall Mount Installation Guide Comprehensive installation guide for the HAGOR BrackIT® S-I TV wall mount, detailing parts, safety precautions, and step-by-step mounting instructions for various wall types.
	HAGOR WH Synchron 51 TV Wall Mount Installation Guide Comprehensive installation guide for the HAGOR WH Synchron 51 TV wall mount. Includes parts list, safety precautions, and step-by-step instructions for mounting on concrete, brick, or wood stud walls.
	HAGOR BrackIT® XS-I TV Wall Mount Installation Guide Comprehensive installation manual for the HAGOR BrackIT® XS-I TV wall mount (Art.-Nr.: 8424), detailing parts, hardware, and step-by-step mounting instructions for various wall types and screen backs.
	HAGOR BrackIT® S-II TV Wall Mount Installation Guide Comprehensive installation guide for the HAGOR BrackIT® S-II TV wall mount (Art.-Nr.: 8427). Learn how to safely mount your screen to various wall types, adjust settings, and manage cables.
	HAGOR BrackIT® XS-II Wall Mount Installation Guide Detailed installation instructions for the HAGOR BrackIT® XS-II TV wall mount, including parts list, tools required, and step-by-step mounting procedures for various wall types and screen backs.
	HAGOR CPS-Fixed Arms VESA Mount Installation Guide This guide provides comprehensive instructions for installing HAGOR CPS-Fixed Arms VESA mounts, including models for VESA 200, 400, and 600. It covers essential safety warnings, details the included components, and offers step-by-step installation procedures for various screen back types, along with precise dimensional specifications.
	HAGOR CPS Menuboard W4P 46-65" Installation Guide Comprehensive installation guide for the HAGOR CPS Menuboard W4P, a wall mount designed for 46-65 inch displays. This document provides step-by-step instructions, a detailed parts list, safety precautions, and dimensional specifications.