HAGOR CPS-Fixed Arms VESA Mount Installation Guide

Models: CPS-Fixed Arms VESA 200 (Art.-Nr.: 3236), CPS-Fixed Arms VESA 400 (Art.-Nr.: 3237), CPS-Fixed Arms VESA 600 (Art.-Nr.: 3238)

Important Safety Information

⚠️ Caution!

Technical devices are of considerable value. Handle components carefully during installation and protect them if necessary. If necessary, the installation area should also be secured. Falling parts can cause injuries and material damage.

The materials included in the scope of delivery may not be suitable for the special conditions at the installation site. Please check this in advance and replace them with suitable materials if necessary.

If you are unsure about the installation of the product or have any questions, please contact HAGOR Products GmbH or other trained specialists.

Scope of Delivery

The following components are included:

VESA Arms: 2 pieces (Part A)
Screws:
- M5x14: 4 pieces (Part M-A)
- M6x14: 4 pieces (Part M-B)
- M6x30: 4 pieces (Part M-C)
- M8x30: 4 pieces (Part M-D)
- M8x50: 4 pieces (Part M-E)
Washers: 4 pieces (Part M-F)
Spacers:
- Small spacers: 8 pieces (Part M-G)
- Big spacers: 8 pieces (Part M-H)

Note: Some hardware may be used for specific installation types.

Installation Instructions

Step 1a: VESA Mount Installation (Flat Back Screen)

✔️ Select appropriate screws, washers, and spacers (if needed) for your screen type.

✔️ Center the VESA arms on the back of the display as shown.

✔️ Secure the brackets to the display using the provided screws. Do not over-tighten to avoid damage.

Diagram Description: Shows attaching VESA arms to a flat screen back using screws (M-A, M-B) and washers (M-F). Icons indicate compatibility with different TV types.

Step 1b: VESA Mount Installation (Curved Back Screen)

✔️ Select appropriate screws, washers, and spacers (if needed) for your screen type.

✔️ Center the VESA arms on the back of the display as shown.

✔️ Secure the brackets to the display using the provided screws. Do not over-tighten to avoid damage.

Diagram Description: Shows attaching VESA arms to a curved screen back using screws (M-C, M-D), washers (M-F), and spacers (M-G, M-H, M-E). The diagram illustrates different combinations of screws and spacers for various depths. Icons indicate compatibility with different TV types.

Step 2: Hang Out Protection and Height Adjustment

✔️ Attach the safety lock component (M-C) to the VESA arm and the screen as depicted.

✔️ Use a screwdriver ? to secure the lock, preventing the screen from accidentally disengaging.

The height adjustment allows for 10 mm of vertical movement.

Diagram Description: Illustrates attaching a safety mechanism (labeled M-C) to the VESA arm and screen using a screwdriver. It also shows the mechanism for adjusting the screen height by 10 mm.

Dimensions

CPS-Fixed Arms VESA 200

Arm Depth: 46mm
VESA Plate Width: 28mm
Height: 240mm
VESA Compatibility: min 100mm ~ max 200mm

CPS-Fixed Arms VESA 400

Arm Depth: 46mm
VESA Plate Width: 28mm
Height: 440mm
VESA Compatibility: min 100mm ~ max 400mm

CPS-Fixed Arms VESA 600

Arm Depth: 46mm
VESA Plate Width: 28mm
VESA Compatibility: min 100mm ~ max 600mm

Diagram Description: Shows side and front views of the VESA arms with specific measurements for each VESA size (200, 400, 600).

	HAGOR BrackIT® S-I TV Wall Mount Installation Guide Comprehensive installation guide for the HAGOR BrackIT® S-I TV wall mount, detailing parts, safety precautions, and step-by-step mounting instructions for various wall types.
	HAGOR BrackIT® M TV Wall Mount Installation Guide (Model 8428) Comprehensive installation manual for the HAGOR BrackIT® M TV wall mount (Art.-Nr.: 8428), detailing safety precautions, parts list, step-by-step assembly, and dimensions.
	HAGOR BrackIT® XS-I TV Wall Mount Installation Guide Comprehensive installation manual for the HAGOR BrackIT® XS-I TV wall mount (Art.-Nr.: 8424), detailing parts, hardware, and step-by-step mounting instructions for various wall types and screen backs.
	HAGOR BL Superslim Tilt 600 Installation Manual Comprehensive installation guide for the HAGOR BL Superslim Tilt 600 TV wall mount, detailing setup for various wall types, VESA compatibility, and adjustments. Includes safety precautions and parts list.
	HAGOR HA Tablemount FS Triple Installation Manual (Art.-Nr.: 8710) Comprehensive installation guide for the HAGOR HA Tablemount FS Triple (Art.-Nr.: 8710), detailing safe assembly and setup for multiple monitors. Includes multilingual support.
	HAGOR WH Synchron 51 TV Wall Mount Installation Guide Comprehensive installation guide for the HAGOR WH Synchron 51 TV wall mount. Includes parts list, safety precautions, and step-by-step instructions for mounting on concrete, brick, or wood stud walls.
	HAGOR HA Tablemount KB Dual Monitor Mount - Installation Guide & Specifications This guide provides detailed instructions for installing the HAGOR HA Tablemount KB Dual monitor mount (Art.-Nr.: 8707). It includes a comprehensive parts list, step-by-step assembly instructions, and key dimensions for secure and optimal monitor placement.
	HAGOR BrackIT® S-II TV Wall Mount Installation Guide Comprehensive installation guide for the HAGOR BrackIT® S-II TV wall mount (Art.-Nr.: 8427). Learn how to safely mount your screen to various wall types, adjust settings, and manage cables.