Momcozy Mobile Style Breast Pump

Getting Started

For product-related issues, find solutions in the user guide video.

Assembly Instructions

Diaphragm Installation

Correct Installation: ✔️ The diaphragm is fully pressed into the flange connector, it does not tilt, and it is properly locked.

Incorrect Installation: ❌ There is a gap; it is not locked in place. The diaphragm is not pressed properly, it is tilted, and not locked correctly.

Milk Collector Assembly

Align the flange edge with the indicated line on the milk collector.

Ensure the milk spout on the flange is properly aligned with the base of the milk collector and does not tilt.

Correct Assembly: ✔️ The flange is correctly aligned with the collector's line, and the connection is secure.

Incorrect Assembly: ❌ If the flange is not aligned with the line or is not completely sealed, milk may leak from the gaps.

Nipple Measurement Guide

If your recommended flange size is less than 24 mm, ensure a proper fit using the flange insert.

Note: The insert can only be attached to a 24 mm flange, not a 27 mm flange.

Control Panel Functions

• 1: Usage time / Suction level indicator
• 2: Battery charge indicator
• 3: On/Off/Pause button
• 4: Mode selection
• 5: Decrease button
• 6: Increase button

Power: Press and hold the On/Off/Pause button to turn the device on or off.

Pause/Resume: Press the On/Off/Pause button once to pause or resume pumping.

Modes:

• Stimulation: Mimics a fast and short suction pattern to initiate milk flow.
• Expression: Uses a slow suction pattern for pumping milk.
• Combination: A fast, short suction pattern followed by a slow, long suction pattern.

Pouring Milk

Note: Do not detach the flange directly for pouring milk!

Detach the pump motor and pour milk through the opening at the top of the milk collector.

Cleaning and Sterilization

Non-washable Parts:

• Pump motor

Washable Parts:

• Valve
• Flange
• Diaphragm
• Milk Collector

Cleaning and Sterilizing Washable Parts:

1. Clean with soapy water (100-140°F / 40-60°C) for 3-5 minutes.
2. Recommended sterilization methods are boiling or steaming. Avoid sterilization in a microwave or UV sterilizer, as these methods can damage parts and shorten their lifespan.

Important Notes

1. The expected lifespan of washable parts is 1-3 months. It is recommended to replace washable parts after prolonged storage or before pumping for another child.
2. The breast pump will automatically shut off after 30 minutes of use.
3. If pumping feels uncomfortable or you experience tingling, release the seal by gently placing your finger between the flange and your breast, stop using the pump, and consult a healthcare professional.