NOVA LIFE NOOR II Interior Floor Lamp

Package Contents

Parts are not to scale:

Diagram shows two main lamp components labeled 'A' (the fixture with wire) and a smaller item labeled 'B' (a wrench).

Light Source

Requires 230V GU10 bulbs, 3 x 25W Max (bulbs not included). LED bulbs are recommended.

Dimmer

Features a dimmer integrated into the wire.

Care and Cleaning

Exterior Maintenance

1. To clean the exterior, use a dry or slightly dampened clean cloth. Use clean water only; never use solvents. Gently wipe the surface.
2. Avoid using any cleaners containing chemicals, solvents, or harsh abrasives. Use only a dry, soft cloth for dusting or careful wiping.

Installation

Pre-Installation

Planning the Installation

Read all instructions before assembly and installation. Before starting installation or removal of a previous fixture, disconnect the power by turning off the circuit breaker or removing the fuse from the fuse box. To prevent damage to this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.

Tools Required

Knife

Assembly Steps

Step 1: Pole Assembly

Diagram illustrates assembling the floor lamp pole. It shows connecting the base to the first pole section, then adding subsequent pole sections, and finally attaching the lamp head assembly to the top.

Step 2: Fixture Attachment

Diagram shows the final assembly of the lamp heads onto the pole and connecting the internal wiring.

Installation (Continued)

Step 1: Base Wiring

Diagram details connecting the power wire to the base of the floor lamp.

Step 2: Lamp Head Installation

Diagram shows the lamp heads being attached to the top of the assembled pole.

Operation

• Turn on power at the circuit breaker or fuse box.
• Turn the light switch on to activate the fixture.

CAUTION

• Only use bulbs as directed on the label on the lamp.
• Turn off the lamp before replacing the bulb and wait until the bulb has cooled. Take special care to touch the lamp when it is lit, as it can be hot.